Linksys PCMLM56 Download Drivers

Available 1 files for PCMLM56
Company
Linksys
Categories
Fax & Modem & ISDN
Model
Linksys PCMLM56
Description
Drivers
Operating Systems
Windows 98Se-Me-2000-XP
Size Driver
433Kb
File Name
pcmlm56.zip
Info
Contents
컴컴컴컴
Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with LanModem
Driver Directory Structure
Support Options
Copyrights, Trademarks, and Disclaimers

Introduction
컴컴컴컴컴컴
Thank you for purchasing the Linksys EtherFast 10&100 + 56K PC Card
(PCMLM56). This diskette has network driver support
for the PC Card. There is a format change for this driver disk.
All README's have been reformatted, an easy setup program,
and consistency on all documentation provided.

We hope our new readme's and installation will minimize the users
effort to make our products work. Should you have further
recommendations please contact the support manager.

Install PC Card Software Manually
컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴
The installation software has been carefully designed to detect
a combination of hardware and software installed on the PC. Proper
detection will allow the PC's PC Card drivers to enable the
PC Card. If the installation software fails to complete, the enabler
will need to be manually copied from the driver disk to the PC.

If Windows for Workgroup 3.11, Windows NT, or Windows 95/98 are used,
follow the instructions for installing PC Cards in the PC's manual.

Determine if any third party generic enablers installed on the PC.
These are identified by a search through the CONFIG.SYS file for
the following lines:

Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE

If one of these exist in your CONFIG.SYS, it can be used to enable
the PC Card. Follow the PCMCIA driver installation instructions in
the PC's manual.

If the PC Card drivers do not support multi-function cards, please
use the included enabler.

Disable all current PC Card drivers by editing the CONFIG.SYS
and AUTOEXEC.BAT. If it is necessary to keep these drivers
for other adapters skip to next section.
Insert Driver Disk in drive A:.
Type C: at the command prompt.
Type MD LMCARD to make a new directory.
Type COPY A:\ENABLER\*.* C:\LMCARD to copy the enabler to
your directory.
Modify the PATH= statement in your AUTOEXEC.BAT to include
path C:\LMCARD.

Change From PATH=
To PATH=;C:\LMCARD

Use the CARDEN.EXE to enable the PC Card when the PC is loading
Card Services.
HelpDrivers Since March 2000