Lectron R56XVP-T0S Download Drivers

Available 3 files for R56XVP-T0S
Company
Lectron
Categories
Fax & Modem & ISDN
Model
Lectron R56XVP-T0S
Description
Drivers
Operating Systems
Windows 2000-XP
Size Driver
1.8Mb
File Name
r56xvp(2k-v281)-x0s.exe
Info
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------

Important notes:

1) This driver is compatible with motherboards based on the Intel 810,
Intel 815, Intel 820, Intel 440MX (Banister), VIA VT82C686,
SiS 540 / 630 and ALI MD1535 core logic chipsets. An updated list
of compatible motherboards can be found on Smart Link's web site
(www.smlink.com).

2) This version of HAMR56xx was tested only with Microsoft
Windows 2000 Professional.

3) If HAMR56xx is already installed in your system and you want
to re-install new version, first uninstall HAMR56xx (See
Uninstall Procedure), and only then proceed to install the
new version.

3) Check the HAMR56xx card for proper setting of Primary or
Secondary Codec Mode.
To install HAMR56xx for the first time:
-------------------------------------------
a) Turn your PC off, and remove the power cord.

NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND
YOUR PC, REMOVE THE POWER CORD.

b) Plug in the HAMR56xx modem into an AMR slot.

c) Restart your PC.

d) Windows 2000 will instantly detect the HAMR56xx modem and will
start software installation.

e) When requested, point to the HAMR56xx installtion directory on
the floppy disk or CD-ROM.

f) HAMR56xx drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that HAMR56xx is installed correctly, follow these
steps:

a) In "Control Panel > Modems": check for the presence of HAMR56xx
Modem.

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that HAMR56xx is working properly:

a) Run Hyper Terminal.
b) Select the "HAMR56xx Modem" or directl to port option.
Company
Lectron
Categories
Fax & Modem & ISDN
Model
Lectron R56XVP-T0S
Description
Drivers
Operating Systems
Windows 95-98-98Se
Size Driver
1.5Mb
File Name
r56xvp(9x-v281)-x0s.exe
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This driver is compatible with motherboards based on the Intel 810,
Intel 815, Intel 820, Intel 440MX (Banister), VIA VT82C686,
SiS 540 / 630 andALI MD1535 core logic chipsets. An updated list of
compatible motherboards can be found on Smart Link's web site
(www.smlink.com).

2) This version of HAMR56xx drivers is compatible only with Microsoft
Windows 95, Windows 98 and Windows 98 SE.

3) If HAMR56xx is already installed in your system and you want
to update its' device driver, first uninstall HAMR56xx drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.

3) Check the HAMR56xx card for proper setting of Primary or
Secondary Codec Mode.
To install HAMR56xx for the first time:
-------------------------------------------
a) Turn your PC off, and remove the power cord.

NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.

b) Plug in the HAMR56xx modem into an AMR slot.

c) Restart your PC.

b) Windows will instantly detect the HAMR56xx modem and will start
software installation.

c) When requested, point to the HAMR56xx installation disk in the
floppy drive or CD-ROM drive.

d) HAMR56xx drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that HAMR56xx is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the presence
of HAMR56xx Modem.
To Check that HAMR56xx is working properly:

a) Open "Hyper Terminal" and select your modem (or "Direct to port").

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Company
Lectron
Categories
Fax & Modem & ISDN
Model
Lectron R56XVP-T0S
Description
Drivers
Operating Systems
Windows NT4
Size Driver
2.1Mb
File Name
r56xvp(nt-v281)-x0s.exe
Info
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------

Important notes:

1) This driver is compatible with motherboards based on the Intel 810,
Intel 815, Intel 820, Intel 440MX (Banister), VIA VT82C686,
SiS 540 / 630 and ALI MD1535 core logic chipsets. An updated list
of compatible motherboards can be found on Smart Link's web site
(www.smlink.com).

2) This version of HAMR56xx is compatible only with Microsoft
Windows NT 4.0.

3) If HAMR56xx is already installed in your system and you want
to re-install new version, first uninstall HAMR56xx (See
Uninstall Procedure), and only then proceed to install the
new version.

3) Check the HAMR56xx card for proper setting of Primary or
Secondary Codec Mode.
To install HAMR56xx for the first time:
-------------------------------------------

Note: Windows NT 4.0 is not a Plug and Play operating system in
the extent featured in Windows 95/98. This single fact is the cause
for much confusion with OEM's who are most familiar with
Windows 98/95. The Installation process for HAMR56xx Modem is the same
as for Programs.

a) Open the installation folder or CD-ROM, and double-click on the
"Setup.exe" icon. Follow the instructions on the screen.

b) When requested, replace the installation disks according to the
instructions on the screen.

c) You must choose a Communication Port which will be used for
your modem. It is recommended to choose Port with number 3 or 4
because some old applications (16-bit) do not support a port higher
then COM4.

d) After files are copied, you will be asked to continue installation
by standard Modem Installer.

e) Click the "Next" button.
Because the modem is not yet installed, it can't be detected by the
System. We recommend you to check "Do not detect my modem..." and
select a modem from the list.

f) Choose Manufacturer and Model from the list and press Next button.
Your Manufacturer is "Modem Vendor", Model is "HAMR56xx Modem".

g) Select your desired Communication Port.

h) Reboot your computer.

The Modem setup is now finished.
HelpDrivers Since March 2000