Company
Lectron
Categories
Fax & Modem & ISDN
Model
Lectron R56XVP-F0S
Description
Drivers
Operating Systems
Windows 95-98-98Se
Size Driver
1.5Mb
File Name
r56xvp(9x-v281)-x0s.exe
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------
Important notes:
1) This driver is compatible with motherboards based on the Intel 810,
Intel 815, Intel 820, Intel 440MX (Banister), VIA VT82C686,
SiS 540 / 630 andALI MD1535 core logic chipsets. An updated list of
compatible motherboards can be found on Smart Link's web site
(www.smlink.com).
2) This version of HAMR56xx drivers is compatible only with Microsoft
Windows 95, Windows 98 and Windows 98 SE.
3) If HAMR56xx is already installed in your system and you want
to update its' device driver, first uninstall HAMR56xx drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.
3) Check the HAMR56xx card for proper setting of Primary or
Secondary Codec Mode.
To install HAMR56xx for the first time:
-------------------------------------------
a) Turn your PC off, and remove the power cord.
NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.
b) Plug in the HAMR56xx modem into an AMR slot.
c) Restart your PC.
b) Windows will instantly detect the HAMR56xx modem and will start
software installation.
c) When requested, point to the HAMR56xx installation disk in the
floppy drive or CD-ROM drive.
d) HAMR56xx drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------
To verify that HAMR56xx is installed correctly, follow these steps:
a) Click "Start > Settings > Control Panel > Modem": check for the presence
of HAMR56xx Modem.
To Check that HAMR56xx is working properly:
a) Open "Hyper Terminal" and select your modem (or "Direct to port").
b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.