Kortex X040ZWMC Download Drivers

Before you install ISDN card driver,
or you want to remove the ISDN driver completely,
please read this notes first.

1. Delete all of our ISDN cards from
ControlPanel->System->Hardware->DeviceManager
2. Run Regedt32
3. Delete Keyname ,"{81055EB3-6FBF-11d2-8890-0000C0050CC6}", under
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class
4. Delete Subkey
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\ISDNLink
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\wanlink
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\link100 (if exists)
5. Change directory to your WINDOWS\INF subdirectory and delete
a. ISDNNDNT.INF file (if exists)
b. OEM*.INF which is related to LINKNT5.INF, where *=0,1,2,.....
(if exists)
c. ISDNLINK.INF
d. OEM*.INF which is related to ISDNLINK.INF, where *=0,1,2,....
6. Shutdown machine
7. Power on machine
8. Install drivers as usual pnp devices

Note. our ISDN USB device can be plugged in before or after step 7.

[Version]
Signature=$CHICAGO$
Class=Modem
Provider=%String0%

[Manufacturer]
%String1% = Models

[Models]
%MODEM10%=Modem1,ISDNMODEM1
%MODEM11%=Modem11,ISDNMODEM11
%MODEM12%=Modem12,ISDNMODEM12
%MODEM13%=Modem13,ISDNMODEM13
%MODEM14%=Modem14,ISDNMODEM14
%MODEM15%=Modem15,ISDNMODEM15
%MODEM20%=Modem2,ISDNMODEM2
%MODEM30%=Modem3,ISDNMODEM3
%MODEM40%=Modem4,ISDNMODEM4

[Modem1]
AddReg=MfgAddReg,Modem1.AddReg

[Modem11]
AddReg=MfgAddReg,Modem11.AddReg

[Modem12]
AddReg=MfgAddReg,Modem12.AddReg

[Modem13]
AddReg=MfgAddReg,Modem13.AddReg

[Modem14]
AddReg=MfgAddReg,Modem14.AddReg

[Modem15]
AddReg=MfgAddReg,Modem15.AddReg

[Modem2]
AddReg=MfgAddReg,Modem2.AddReg

[Modem3]
AddReg=MfgAddReg,Modem3.AddReg

[Modem4]
AddReg=MfgAddReg,Modem4.AddReg

[MfgAddReg]
HKR,, ConfigFlags,1, 00,00,00,00
HKR,, Class,, Modem
HKR,, Mfg,, %String1%
HKR,, NoSetupUI,, 1

HKR,, ID,1, 01,00,00,00
HKR,, Manufacturer,,%String1%
HKR,, FriendlyDriver,,Unimodem.vxd
HKR,, DevLoader,,*vcomm
HKR,, ConfigDialog,,modemui.dll
HKR,, EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,, DeviceType, 1, 01
HKR,, InactivityScale, 1, 0a,00,00,00
HKR,, Properties,1, 00,00,00,00, 00,00,00,00, ff,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,84,03,00, 00,84,03,00
HKR,, DCB,1, 1C,00,00,00, 00,C2,01,00, 11,00,00,00, 00,00,0A,00, 0A,00,08,00, 00,11,13,00, 00,00,4A,7E
HKR,, PortSubClass,1,02
HKR,, Reset,, "ATZ"

HKR,Answer, 1,, "ATA"
HKR,Hangup, 1,, "ATH"
HKR,Init, 1,, "AT&FE0"
HKR,Monitor, 1,, "None"

HKR,Settings, Prefix,, "AT"
HKR,Settings, Terminator,, ""
HKR,Settings, DialPrefix,, "D"
HKR,Settings, DialSuffix,, ""

Before you install ISDN card driver, please read below items first.
This procedure is to make sure your system environment is clear to
install this new ISDN WDM driver.

1. Run "SPW95.EXE" to clean ISDN information.
2. Shutdown machine
3. Don't have to remove exist ISDN cards from machine
4. Power on machine
5. Install drivers as usual pnp devices

Note. USB device can be plug in before or after step 4.

Before you install ISDN card driver, please read below items first.
This procedure is to make sure your system environment is clear to
install this new ISDN WDM driver.

1. Run "SPW95.EXE"(95/98/ME) or "SWP2000.EXE"(2000/XP) to clean ISDN information.
2. Shutdown machine
3. Don't have to remove exist ISDN cards from machine
4. Power on machine
5. Install drivers as usual pnp devices

Note. USB device can be plug in before or after step 4.

How to install Win2000 CAPI driver over external serial TA

1. Run "SWP2000.EXE" to clean ISDN information.
2. Make sure that the serial TA was installed as a PnP modem.
3. Restart computer
4. Choose ControlPanel/AddNewHardware/AddDevice/SelectFromList/NetworkAdapter/HaveDisk
5. Point to isdnlink.inf
6. Select "ISDN Adapter (UART Active)"

ISDN 128K Driver Setup File for WINDOWS NT
;**********************************************
[Identification]
OptionType = NetAdapter

;***********************************************************************
[PlatformsSupported]
ISA
EISA
PCI

;***********************************************************************
[Options]
IINWANNT

;***********************************************************************
[FileConstants]
Company = "ISDN"
ProductName = "ISDN128K"
SwitchType = "6"
VoiceType_Speech = "1"
VoiceType_31KAudio = "4"
aLawType = "0"
uLawType = "1"
CodecType = $(aLawType)
VoiceType = $(VoiceType_31KAudio)
OurMajorVersion = "2"
OurMinorVersion = "30"
BinList = { 0, 0, 0, 0, 0, 0, 0, 0,+
0, 0, 0, 0, 32, 0, 0, 0,+
34, 0, 0, 0, 0, 0, 0, 0,+
34 }
IIN100KeyName = "IIN100"
IIN100PropName = "IIN100\Properties"
IIN100EventLog = "EventLog\System\iin100"
MessageFileName = "%SystemRoot%\System32\netevent.dll;"+
"%SystemRoot%\System32\Drivers\iin100.sys"
RunCode = 6
; ----------------------------------------------------------------------

InfName = "OEMINWAN.INF"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = $(Company)
ProductGroupName = $(ProductName)
ProductMajorVersion = $(OurMajorVersion)
ProductMinorVersion = $(OurMinorVersion)
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "IINWANNT"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\IINWANNT.sys"
NetRuleSoftwareType = "IINWANNTSys IINWANNTDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """IINWANNTSys"" yes no container"
NetRuleSoftwareClass = {"IINWANNTDriver basic"}
NetRuleSoftwareBindable = {"IINWANNTDriver IINWANNTAdapter non exclusive 100"}
ProductHardwareName = "IINWANNT"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareIINWANNTType = "IINWANNT IINWANNTAdapter"
NetRuleHardwareIINWANNTClass = {"IINWANNTAdapter basic"}
BindableIINWANNTTxt = {"IINWANNTDriver IINWANNTAdapter non exclusive 100"}
DeviceMap = "HARDWARE\DEVICEMAP"
TapiDevices = "TAPI DEVICES"
TapiDeviceKey = $(ProductHardwareName)
TapiMediaType = "ISDN"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+
$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+
"\Parameters"