Kingmax KLM5610-RF Download Drivers

Available 1 files for KLM5610-RF
Company
Kingmax
Categories
Fax & Modem & ISDN
Model
Kingmax KLM5610-RF
Description
Drivers
Operating Systems
Windows 95-98-NT
Size Driver
209Kb
File Name
5610v105.exe
Info
1. SYSTEM REQUIREMENTS
2. DISKETTE CONTENTS
3. CLIENT DRIVER
4. DIAGNOSTIC PROGRAM
5. NETWARE DOS ODI DRIVER
6. Artisoft LANtastic Ver6.0
7. NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
8. NDIS DRIVER FOR LAN MANAGER V2.1
9. NDIS DRIVER FOR WINDOWS 95
10. NDIS DRIVER FOR WINDOWS 98
11. NDIS DRIVER FOR WINDOWS NT 4.0
[1] SYSTEM REQUIREMENTS

Hardware: Notebook equipped with Type II PCMCIA slot and PCMCIA
Socket controller.

BIOS: Fully compliant Rev. 2.1 or above PCI BIOS supplied with
the notebook.

Card and Socket Services Driver:
Comply with PC Card Standard, February 1995 or higher.
[2] DISKETTE CONTENTS
Files and
Subdirectories Contents
--------------------------------------------------------------------
\README.TXT This file
\INSTALL.EXE DOS Drivers Installation Program
\CARDENCS.EXE PCMCIA Client Driver
\CARDEN.EXE Point Enabler for PCMCIA Controller
\DIAG.EXE Diagnostic Program
\MFTC3399.INF Windows 9x Installation File
\NETC3399.INF Windows 9x LAN Installation File
\MDTC3399.INF Windows 9x Modem Installation File
\TC3399.SYS Windows9x device driver
\NETWARE.ODI Novell Netware DOS ODI Driver Directory
\NDIS2 Generic NDIS2 Driver Directory
\WFW311 NDIS2 Driver Directory for Windows for Workgroup 3.11
\WINNT40 NDIS4 Driver Directory for Windows NT 4.0
\MSLANMAN.DOS NDIS2 Driver Directory for Microsoft LAN Manager
\LANTASTI.V60 NDIS2 Driver Directory for Artisoft LANtastic Ver 6.0
\PKTDRV Packet Driver Directory
[3] CLIENT DRIVER (For DOS environment Only)

The CLIENT DRIVER, CARDENCS.EXE, is a PCMCIA controller enable program.
This enable program is only needed for DOS environment. You should
install the Socket and Card service in your Notebook before executing
the client driver. If you do not have the Socket or card service
program, please call your notebook vendor. The client driver will keep
resident for handling card insertion and removal events. This feature
can prevent the system from crashing when the card is removed from
socket.

To load the client driver, type

CARDENCS [/IRQ=x][/IO=xxx][/MIRQ=x][/COMx][MEM=xxxx][/?]

in DOS command line, or

DEVICE=[PATHNAME]CARDENCS.EXE [/IRQ=x][/IO=xxx][/MIRQ=x][/COMx][MEM=xxxx][/?]

in config.sys file.
HelpDrivers Since March 2000