Keydata Keynote 6600 - 340S8 Download Drivers

Available 4 files for Keynote 6600 - 340S8
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6600 - 340S8
Description
Drivers
Operating Systems
Windows 2000
Size Driver
2.3Mb
File Name
340s8_modem_2k.exe
Info
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------

Important notes:

1) This driver supports HAMR5600, SmartRiseer56 and SmartPCI56 modem
chipsets.

2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on Smart Link's
web site (www.smlink.com).

3) This version of drivers was tested only with Microsoft
Windows 2000 Professional.

4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.

5) Before installing, check your HAMR5600 or SmartRiser56 card for proper
setting of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------
a) Turn your PC off, and remove the power cord.

NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN
WHEN THE PC IS TURNED OFF. TO PREVENT DAMAGE TO YOUR MODEM
AND YOUR PC, REMOVE THE POWER CORD.

b) Plug in the modem card into an AMR slot.

c) Restart your PC.

d) Windows 2000 will instantly detect the modem and will start
software installation.

e) When requested, point to the modem installtion directory on the floppy
disk or CD-ROM.

f) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these
steps:

a) In "Control Panel > Modems": check for the presence of your modem.

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6600 - 340S8
Description
Drivers
Operating Systems
Windows 95-98
Size Driver
2Mb
File Name
340s8_modem_9x.exe
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This driver supports HAMR5600, SmartRiseer56 and SmartPCI56 modem
chipsets.

2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on Smart Link's
web site (www.smlink.com).

3) This version drivers is compatible with Microsoft Windows 95, Windows 98,
Windows 98SE and Windows Millennium.

4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.

5) Before installing, check your HAMR5600 or SmartRiser56 card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------

a) Turn your PC off, and remove the power cord.

NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.

b) Plug in your HAMR5600 or SmartRiser56 modem card into an AMR slot, or your
SmartPCI56 card into a free PCI slot.

c) Restart your PC.

b) Windows will instantly detect the modem and will start software installation.

c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "Smart Link 56K Modem".
To Check that the modem is working properly:

a) Open "Hyper Terminal" and select your modem (or "Direct to port").
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6600 - 340S8
Description
Drivers
Operating Systems
Windows Me
Size Driver
2.3Mb
File Name
340s8_modem_me.exe
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This driver supports HAMR5600, SmartRiseer56 and SmartPCI56 modem
chipsets.

2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on Smart Link's
web site (www.smlink.com).

3) This version drivers is compatible with Microsoft Windows 95, Windows 98,
Windows 98SE and Windows Millennium.

4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.

5) Before installing, check your HAMR5600 or SmartRiser56 card for proper setting
of Primary or Secondary Codec Mode.
To install your modem drivers for the first time:
-------------------------------------------------

a) Turn your PC off, and remove the power cord.

NOTE: SOME PCI 2.2 MOTHERBOARDS KEEP THE SLOTS POWERED EVEN WHEN THE
PC IS TURNED OFF. TO PREVENT DAMAGE TO HAMR56XX AND YOUR PC, REMOVE
THE POWER CORD.

b) Plug in your HAMR5600 or SmartRiser56 modem card into an AMR slot, or your
SmartPCI56 card into a free PCI slot.

c) Restart your PC.

b) Windows will instantly detect the modem and will start software installation.

c) When requested, point to the drivers installation disk in the
floppy drive or CD-ROM drive.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the presence
of a "Smart Link 56K Modem".
To Check that the modem is working properly:

a) Open "Hyper Terminal" and select your modem (or "Direct to port").
Company
Keydata
Categories
Fax & Modem & ISDN
Model
Keydata Keynote 6600 - 340S8
Description
Drivers
Operating Systems
Windows NT
Size Driver
2.1Mb
File Name
340s8_modem_nt.exe
Info
Contents
--------
1) Installation
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country Selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
--------------
1. Installation
--------------

Important notes:

1) This driver supports HAMR5600, SmartRiseer56 and SmartPCI56 modem
chipsets.

2) For HAMR5600 and SmartRiser56, this driver is compatible with
motherboards based on the Intel 810, 820, 815E, 820E, 440MX (Banister),
VIA VT82C686, SiS 540 / 630 and ALI M1535/M1535D+ core logic chipsets.
An updated list of compatible motherboards can be found on Smart Link's
web site (www.smlink.com).

3) This version of drivers is compatible only with Microsoft
Windows NT 4.0.

4) If a Smart Link modem is already installed in your system and you want
to update its' device driver, first uninstall existing drivers (See
Uninstall Procedure), and only then proceed to install the new drivers.

5) Before installing, check your HAMR5600 or SmartRiser56 card for proper
setting of Primary or Secondary Codec Mode.

To install your modem drivers for the first time:
-------------------------------------------------

Note: Windows NT 4.0 is not a Plug and Play operating system in
the extent featured in Windows 95/98. This single fact is the cause
for much confusion with OEM's who are most familiar with
Windows 98/95. The Installation process for the modem is the same
as for Programs.

a) Open the installation folder or CD-ROM, and double-click on the
"Setup.exe" icon. Follow the instructions on the screen.

b) When requested, replace the installation disks according to the
instructions on the screen.

c) You must choose a Communication Port which will be used for
your modem. It is recommended to choose Port with number 3 or 4
because some old applications (16-bit) do not support a port higher
then COM4.

d) After files are copied, you will be asked to continue installation
by standard Modem Installer.

e) Click the "Next" button.
Because the modem is not yet installed, it can't be detected by the
System. We recommend you to check "Do not detect my modem..." and
select a modem from the list.

f) Choose Manufacturer and Model from the list and press Next button.

Your Manufacturer is "Modem Vendor", Model is "Smart Link 56K Modem".

g) Select your desired Communication Port.
HelpDrivers Since March 2000