KDS ISA V1456VQH-R or R4 Download Drivers

Available 1 files for ISA V1456VQH-R or R4
Company
KDS
Categories
Fax & Modem & ISDN
Model
KDS ISA V1456VQH-R or R4
Description
Drivers
Operating Systems
Windows 95-98-NT
Version Driver
VER.2.100
Size Driver
484Kb
File Name
v1456vqh-rorr4win98ntv2100.exe
Info
This driver and INF file is used for Windows 95 or NT 4.0 only.

I. What does it do?

These INF/Driver files will update your Windows 95 modem driver so that you can select the
maximun DTE speed to 230,400 bps.

The DTE speed is sometimes called the maximum throughput speed. It is the maximum speed your
modem's UART will communicate to the PC. The line speed is the speed the modem transmit data
through the telephone line. Because your Amquest modem has built-in data compression, the data
is actually being sent from your PC to the other end at 4 to 8 times the line speed. That is
why the throughput is 230K.

II. Which modem can you use this driver for?

If your modem is set to non PnP mode, this driver can be used for all Amquest modems. If your
modem is in PnP modem, this driver is only useful if you have a retail Amquest Hypermodem. If
your modem comes installed in the computer, you need to make sure the modem is in non PnP mode.

III. First time installation.

If you have never installed this modem before, Windows 95 will automatically detect your modem
if it is set to PnP mode. Otherwise, you need to click "Add Hardware" from the "Control Panel"
then ask Windows to detect your new hardware and add the modem.
III. Updating your existing driver.

If you have aleady installed your Hypermodem under Win95, you can update your modem driver to
this 230K driver by following these steps:

(If you download this from the web, you first upzip it. Then, copy all the driver files to a
diskette.)
1. Click on "Control Panel" from "My Computer".
2. Then double click on "System"; you will see "System Properties"
3. Click on "Device Manager", then double click on "Modem".
4. You will see the name of the modem. Double click on it.
5. Click on "Driver". You will see a dialog listing the modem info.
6. Click on the "Update" button on the bottom lower hand.
7. Follow the screen instruction to update the driver.
You should have this driver stored on a diskette.
IV. How to install this INF driver for Windows NT 4.0

1. Open 'My Computer' select the 'Control Panel' and double click 'Modem' icon.
2. If this is the first time which you want to install, go to step 4.
3. Click 'Add' button to add a new modem.
4. Check 'Don't detect my modem, I will select it from a list', then click 'Next'.
5. Click 'Have disk' button.
6. Insert the driver disk into a driver, then enter or browse the directory of the INF file and click 'OK'
7. Select a modem which you want to install from list, then click 'Next'.
8. Select a communication port for your modem, usually in COM2.
9. Click 'Next', then follow the rest process on screen to complete this installation.
HelpDrivers Since March 2000