Jetway V1456VQH-A2 Download Drivers

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=Intels51.cat
DriverVer=07/24/2002, 4.49.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Intel Corporation"
ModemName = "Intel(R) 536EP V.92 Modem"
InstDiskName = "Intel(R) 536EP Installation Disk"
ModemHardwareID = "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040"

;----------------------------------------------------------------------------

[Manufacturer]
%Oem% = Oem

[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
Intels51.sys=1
[CopyFileSection]
Intels51.sys,,,2

[ControlFlags]
ExcludeFromSelect=PCI\VEN_8086&DEV_1040
ExcludeFromSelect=PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00

[Oem]
%ModemName% = Intels51, PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040

[Intels51.NT]
AddReg = Modem.AddReg,Intels51.AddReg,Voice.AddReg
CopyFiles = CopyFileSection

;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[Intels51.NT.Services]
AddService = Intels51, 0x00000000, Intels51_Service_Inst, Intels51_EventLog_Inst

;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[Intels51_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\Intels51.sys
LoadOrderGroup= Base
AddReg = Intels51_Service_Inst_Addreg

[Version]
CatalogFile=Intels11.cat
Signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-11ce-bfc1-08002be10318}
provider=%MfgName%

[Strings]
MfgName="Intel"
;MfgName="Your Company Name"

HaM.DeviceDesc="Intel(R) 536EP Serial Wave Device"
;HaM.DeviceDesc="Your Serial Wave Device"

InstDiskName = "Intel(R) 536EP Installation Disk"

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
[ControlFlags]
ExcludeFromSelect=MODEMWAVE\Intel(R)_536EP_V.92_Modem
;ExcludeFromSelect=MODEMWAVE\Your_Modem_Name

[HaM]
; The device ids (MODEMWAVE\Intel(R)_536EP_V.92_Modem) correspond EXACTLY
; to the modem name with underscores in place of spaces.
; The names must be an exact match or the installer won't find the device.
; This scheme is due to the way serial wave device enumeration occurs.

%HaM.DeviceDesc%=HaMVOICE, MODEMWAVE\Intel(R)_536EP_V.92_Modem
;%HaM.DeviceDesc%=HaMVOICE, MODEMWAVE\Your_Modem_Name

[Manufacturer]
%MfgName%=HaM

[SourceDisksNames]
1=%InstDiskName%,,

[HaMVOICE]
AddReg=MSSERWAVE.AddReg, HaMVOICE.AddReg

[HaMVOICE.AddReg]
HKR,,NoSetupUI,,1
HKR,Drivers\wave\serwvdrv.drv,Description,,%HaM.DeviceDesc%
HKR,Config,XformModule, , "umdmxfrm.dll"
HKR,Config,XformID, 1, 04, 00, 00, 00 ; 4-bit IMA ADPCM 8000 Hz format
HKR,Config,WaveDevices, 1, 02, 00 ; Plays/ records to line AND handset
HKR,Config,BaudRate, 1, 00, c2, 01, 00

[MSSERWAVE.AddReg]
HKR,,DevLoader,,mmdevldr.vxd
HKR,Drivers,MIGRATED,,0
HKR,Drivers\wave,,,
HKR,,Driver,,serwave.vxd
HKR,Drivers\wave\serwvdrv.drv,Driver,,serwvdrv.drv
HKR,Drivers,SubClasses,,"wave"

[Version]
CatalogFile=IntelS21.cat
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Mfg%
DriverVer=07/24/2002, 4.49.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Mfg = "Intel Corporation"
ModemName = "Intel(R) 536EP V.92 Modem"
InstDiskName = "Intel(R) 536EP Installation Disk"

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
[Manufacturer]
%Mfg% = Models

[Models]
%ModemName% = HamMe, WDM_MODEM\VEN_8086&DEV_1040&SUBSYS_10008086

[ControlFlags]
ExcludeFromSelect=WDM_MODEM\VEN_8086&DEV_1040&SUBSYS_10008086

[HamMe]
AddReg = Modem.AddReg,HaM.AddReg,Voice.AddReg
;----------------------------------------------------------------------------
; Modem Registry Sections
;
; The [Modem.Reg] section has settings specific to our device.
;
;----------------------------------------------------------------------------
[Modem.AddReg]
HKR,, DeviceType,1,02
HKR,,PortDriver,,wdmmdmld.vxd
HKR,, Contention,, ""

;HKR,,NoSetupUI,,1

HKR,, FriendlyDriver,0,unimodem.vxd
HKR,, DevLoader,0,*vcomm
HKR,, PortSubClass,1,02
HKR,, ConfigDialog,0,modemui.dll
HKR,, EnumPropPages,0,"modemui.dll,EnumPropPages"

HKR,, DCB, 1, 1C,00,00,00, 00,c2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

;----------------------------------------------------------------------------
; Intel(R) 536EP Registry Sections
;
; This section contains Intel(R) 536EP-specific registry entries and AT commands.
;
;----------------------------------------------------------------------------
[HaM.AddReg]
HKR, Answer, 1,, "ATA"
HKR, Hangup, 1,, "ATH"
HKR, Init, 1,, "AT"
HKR, Init, 2,, "AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4"
HKR,, InactivityScale, 1, 3C,00,00,00
HKR, Monitor, 1,, "ATS0=0"
HKR, Monitor, 2,, "None"
HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, 5a,00,00,00, 07,00,00,00, 0F,00,00,00, 37,03,00,00, 00,C2,01,00, 00,E1,00,00
HKR,, Reset,, "AT&F"

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=Intels51.cat
DriverVer=07/24/2002, 4.49.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Intel Corporation"
ModemName = "Intel(R) 536EP V.92 Modem"
InstDiskName = "Intel(R) 536EP Installation Disk"
ModemHardwareID = "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040"

;----------------------------------------------------------------------------

[Manufacturer]
%Oem% = Oem

[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
Intels51.sys=1
[CopyFileSection]
Intels51.sys,,,2

[ControlFlags]
ExcludeFromSelect=PCI\VEN_8086&DEV_1040
ExcludeFromSelect=PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00

[Oem]
%ModemName% = Intels51, PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040

[Intels51.NT]
AddReg = Modem.AddReg,Intels51.AddReg,Voice.AddReg
CopyFiles = CopyFileSection

;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[Intels51.NT.Services]
AddService = Intels51, 0x00000000, Intels51_Service_Inst, Intels51_EventLog_Inst

;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[Intels51_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\Intels51.sys
LoadOrderGroup= Base
AddReg = Intels51_Service_Inst_Addreg

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=Intels51.cat
DriverVer=07/24/2002, 4.49.1

;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Intel Corporation"
ModemName = "Intel(R) 536EP V.92 Modem"
InstDiskName = "Intel(R) 536EP Installation Disk"
ModemHardwareID = "PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040"

;----------------------------------------------------------------------------

[Manufacturer]
%Oem% = Oem

[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12

[SourceDisksNames]
1=%InstDiskName%,,

[SourceDisksFiles]
Intels51.sys=1
[CopyFileSection]
Intels51.sys,,,2

[ControlFlags]
ExcludeFromSelect=PCI\VEN_8086&DEV_1040
ExcludeFromSelect=PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00

[Oem]
%ModemName% = Intels51, PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00, PCI\VEN_8086&DEV_1040

[Intels51.NT]
AddReg = Modem.AddReg,Intels51.AddReg,Voice.AddReg
CopyFiles = CopyFileSection

;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[Intels51.NT.Services]
AddService = Intels51, 0x00000000, Intels51_Service_Inst, Intels51_EventLog_Inst

;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[Intels51_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\Intels51.sys
LoadOrderGroup= Base
AddReg = Intels51_Service_Inst_Addreg