Available 4 files for V1456VQH-A
Company
Jetway
Categories
Fax & Modem & ISDN
Model
Jetway V1456VQH-A
Description
FCC only
Operating Systems
Windows 2000
Version Driver
67-0000C6Q Rev01
Size Driver
165Kb
File Name
vqha2000.zip
Info
[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=ambienth.cat
DriverVer=03/03/2000,3.22.0.0
;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Ambient Technologies"
ModemName = "Ambient HaM Data Fax"
InstDiskName = "HaM Installation Disk"
;----------------------------------------------------------------------------
[Manufacturer]
%Oem% = Oem
[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12
[SourceDisksNames]
1=%InstDiskName%,,
[SourceDisksFiles]
ham.sys=1
ambienth.cat=1
[CopyFileSection]
ham.sys,,,2
ambienth.cat
[ControlFlags]
ExcludeFromSelect=UNIMODEM9AF00468
ExcludeFromSelect=PCI\VEN_1813&DEV_4000
ExcludeFromSelect=PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02
[Oem]
%ModemName% = HaM, PCI\VEN_1813&DEV_4000, PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02, UNIMODEM9AF00468
[HAM.NT]
AddReg = Modem.AddReg,HaM.AddReg
CopyFiles = CopyFileSection
;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[HAM.NT.Services]
AddService = HAM, 0x00000000, HAM_Service_Inst, HAM_EventLog_Inst
;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[HAM_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\ham.sys
LoadOrderGroup= Base
AddReg = HAM_Service_Inst_Addreg
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=ambienth.cat
DriverVer=03/03/2000,3.22.0.0
;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Ambient Technologies"
ModemName = "Ambient HaM Data Fax"
InstDiskName = "HaM Installation Disk"
;----------------------------------------------------------------------------
[Manufacturer]
%Oem% = Oem
[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12
[SourceDisksNames]
1=%InstDiskName%,,
[SourceDisksFiles]
ham.sys=1
ambienth.cat=1
[CopyFileSection]
ham.sys,,,2
ambienth.cat
[ControlFlags]
ExcludeFromSelect=UNIMODEM9AF00468
ExcludeFromSelect=PCI\VEN_1813&DEV_4000
ExcludeFromSelect=PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02
[Oem]
%ModemName% = HaM, PCI\VEN_1813&DEV_4000, PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02, UNIMODEM9AF00468
[HAM.NT]
AddReg = Modem.AddReg,HaM.AddReg
CopyFiles = CopyFileSection
;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[HAM.NT.Services]
AddService = HAM, 0x00000000, HAM_Service_Inst, HAM_EventLog_Inst
;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[HAM_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\ham.sys
LoadOrderGroup= Base
AddReg = HAM_Service_Inst_Addreg
Company
Jetway
Categories
Fax & Modem & ISDN
Model
Jetway V1456VQH-A
Description
FCC only
Operating Systems
Windows 95-98
Version Driver
67-0000C6Q Rev01
Size Driver
327Kb
File Name
vqha98.zip
Info
To INSTALL the HaM Modem
=============================
Shut down your computer and installed the HaM modem card.
When you restart your computer (and after network logon,
if appropriate), Windows will recognize the HaM modem as
a new device which needs software drivers installed and will
prompt you to search for a driver for the new device.
You should insert the 'HaM Install Diskette' and press OK.
The Install Wizard will search the diskette and find the drivers
for the modem (Ambient HaM). Select the HaM modem and continue.
Windows will copy the files to their proper directories,
and make several additions to the Window's Registry
to support the HaM modem. When the installation completes, the
HaM Control Panel utility will automatically start to allow you
to change user preferences and the HaM COM port.
If you need to use a DOS-based communications application, then you
must reboot after the installation finishes. The DOS support driver
is loaded at Windows startup time, so it will not be loaded immediately
after the installation process completes. After the first reboot, however,
the driver will be loaded automatically each time that you boot.
=============================
What is added to my system?
=============================
The following files will be copied to your system during the installation:
\Windows\HAMPANEL.EXE - HaM Front panel utility
This applet displays a modem front panel when maximized and
reports the internal status of the modem, including connect
protocols and speeds. If it is running as a tray icon,
then you can wave your mouse pointer over the icon to display
a status tooltip (try this when you're online).
\Windows\HAMRMDEV.EXE - HaM Remove Device utility
This applet is only used at uninstall time to remove the HaM
modem device from the Window's system tree. This application
performs the same function as the following steps:
- Open the Control Panel folder from the Start menu
- Start the 'Modems' wizard
- Select the HaM modem in the list
- Click 'Remove' to remove the device
The HAMRMDEV utility is run as a child process of the
HaM Configuration Utility (hamcpl.cpl) when the user clicks
'Uninstall' on the Uninstall property page.
\Windows\HAMRMCPL - HaM Remove Control Panel Utility
This utility is used to remove the HaM Control Panel after the
HaM modem has been uninstalled. Note that the HaM Control Panel will not
be removed from the computer until the next time Windows is restarted.
\Windows\System\HAMPORT.VXD - HaM main modem driver
This is the main driver file which contains all of the modem Layer 2
protocol/compression/data flow software and the Windows driver
interface code. It also supports interface calls for
32-bit status applications (like the HAMPANEL applet).
\Windows\System\HAM_DBS.VXD - HaM DOS Box support driver
This driver loads at boot time and redirects direct COM port register
accesses into calls to the VCOMM virtual device driver, which
subsequently calls into our HaM port driver. This enables legacy DOS
comm applications and DOS-based games to work with our 'virtual' port.
=============================
Shut down your computer and installed the HaM modem card.
When you restart your computer (and after network logon,
if appropriate), Windows will recognize the HaM modem as
a new device which needs software drivers installed and will
prompt you to search for a driver for the new device.
You should insert the 'HaM Install Diskette' and press OK.
The Install Wizard will search the diskette and find the drivers
for the modem (Ambient HaM). Select the HaM modem and continue.
Windows will copy the files to their proper directories,
and make several additions to the Window's Registry
to support the HaM modem. When the installation completes, the
HaM Control Panel utility will automatically start to allow you
to change user preferences and the HaM COM port.
If you need to use a DOS-based communications application, then you
must reboot after the installation finishes. The DOS support driver
is loaded at Windows startup time, so it will not be loaded immediately
after the installation process completes. After the first reboot, however,
the driver will be loaded automatically each time that you boot.
=============================
What is added to my system?
=============================
The following files will be copied to your system during the installation:
\Windows\HAMPANEL.EXE - HaM Front panel utility
This applet displays a modem front panel when maximized and
reports the internal status of the modem, including connect
protocols and speeds. If it is running as a tray icon,
then you can wave your mouse pointer over the icon to display
a status tooltip (try this when you're online).
\Windows\HAMRMDEV.EXE - HaM Remove Device utility
This applet is only used at uninstall time to remove the HaM
modem device from the Window's system tree. This application
performs the same function as the following steps:
- Open the Control Panel folder from the Start menu
- Start the 'Modems' wizard
- Select the HaM modem in the list
- Click 'Remove' to remove the device
The HAMRMDEV utility is run as a child process of the
HaM Configuration Utility (hamcpl.cpl) when the user clicks
'Uninstall' on the Uninstall property page.
\Windows\HAMRMCPL - HaM Remove Control Panel Utility
This utility is used to remove the HaM Control Panel after the
HaM modem has been uninstalled. Note that the HaM Control Panel will not
be removed from the computer until the next time Windows is restarted.
\Windows\System\HAMPORT.VXD - HaM main modem driver
This is the main driver file which contains all of the modem Layer 2
protocol/compression/data flow software and the Windows driver
interface code. It also supports interface calls for
32-bit status applications (like the HAMPANEL applet).
\Windows\System\HAM_DBS.VXD - HaM DOS Box support driver
This driver loads at boot time and redirects direct COM port register
accesses into calls to the VCOMM virtual device driver, which
subsequently calls into our HaM port driver. This enables legacy DOS
comm applications and DOS-based games to work with our 'virtual' port.
Company
Jetway
Categories
Fax & Modem & ISDN
Model
Jetway V1456VQH-A
Description
FCC only
Operating Systems
Windows NT4
Version Driver
67-0000C6Q Rev01
Size Driver
758Kb
File Name
vqhant.zip
Info
[Version]
Signature = "$CHICAGO$"
Class = "Modem"
ClassGUID = {4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider = %Oem%
[Manufacturer]
%Oem% = Oem
[Oem]
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM1, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM2, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM3, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM4, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM5, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM6, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM7, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM8, UNIMODEMD40C23E5
[HAM.NT]
AddReg = Modem.AddReg, HAM.AddReg, Service.AddReg
;----------------------------------------------------------------------------
; Service Registry Sections
;
; The [Service.Reg] section has settings the HaM service will use.
;
;----------------------------------------------------------------------------
[Service.AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,DeviceDesc,,"%ModemName%"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,Mfg,,"%Oem%"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,International,1,1
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,DefaultCountryID,,"1"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,CountryIndex,1,0
;----------------------------------------------------------------------------
; Modem Registry Sections
;
; The [Modem.Reg] section has settings specific to our device.
;
;----------------------------------------------------------------------------
[Modem.AddReg]
HKR,, FriendlyDriver,,Unimodem.vxd
HKR,, DevLoader,,*vcomm
HKR,, ConfigDialog,,modemui.dll
HKR,, EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,, PortSubClass, 1, 02
HKR,, DeviceType, 1, 02
;----------------------------------------------------------------------------
; HaM Registry Sections
;
; This section contains HAM-specific registry entries and AT commands.
;
;----------------------------------------------------------------------------
[HAM.AddReg]
HKR, Answer, 1,, "ATA"
HKR, Hangup, 1,, "ATH"
HKR, Init, 1,, "AT"
HKR, Init, 2,, "AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4"
HKR,, InactivityScale, 1, 3C,00,00,00
HKR, Monitor, 1,, "ATS0=0"
HKR, Monitor, 2,, "None"
HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 06,00,00,00, 0F,00,00,00, 77,03,00,00, 00,C2,01,00, 00,E1,00,00
HKR,, Reset,, "AT&F"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, Compression_On,, "%%C1+DS=3,0;"
HKR, Settings, Compression_Off,, "%%C0+DS=0,0;"
Signature = "$CHICAGO$"
Class = "Modem"
ClassGUID = {4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider = %Oem%
[Manufacturer]
%Oem% = Oem
[Oem]
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM1, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM2, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM3, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM4, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM5, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM6, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM7, UNIMODEMD40C23E5
%ModemName% = HaM, ROOT\UNIMODEMD40C23E5\COM8, UNIMODEMD40C23E5
[HAM.NT]
AddReg = Modem.AddReg, HAM.AddReg, Service.AddReg
;----------------------------------------------------------------------------
; Service Registry Sections
;
; The [Service.Reg] section has settings the HaM service will use.
;
;----------------------------------------------------------------------------
[Service.AddReg]
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,DeviceDesc,,"%ModemName%"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,Mfg,,"%Oem%"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,International,1,1
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,DefaultCountryID,,"1"
HKLM,SYSTEM\CurrentControlSet\Services\%ServiceName%\Parameters,CountryIndex,1,0
;----------------------------------------------------------------------------
; Modem Registry Sections
;
; The [Modem.Reg] section has settings specific to our device.
;
;----------------------------------------------------------------------------
[Modem.AddReg]
HKR,, FriendlyDriver,,Unimodem.vxd
HKR,, DevLoader,,*vcomm
HKR,, ConfigDialog,,modemui.dll
HKR,, EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,, PortSubClass, 1, 02
HKR,, DeviceType, 1, 02
;----------------------------------------------------------------------------
; HaM Registry Sections
;
; This section contains HAM-specific registry entries and AT commands.
;
;----------------------------------------------------------------------------
[HAM.AddReg]
HKR, Answer, 1,, "ATA
HKR, Hangup, 1,, "ATH
HKR, Init, 1,, "AT
HKR, Init, 2,, "AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4
HKR,, InactivityScale, 1, 3C,00,00,00
HKR, Monitor, 1,, "ATS0=0
HKR, Monitor, 2,, "None"
HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 06,00,00,00, 0F,00,00,00, 77,03,00,00, 00,C2,01,00, 00,E1,00,00
HKR,, Reset,, "AT&F
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, Compression_On,, "%%C1+DS=3,0;"
HKR, Settings, Compression_Off,, "%%C0+DS=0,0;"
Company
Jetway
Categories
Fax & Modem & ISDN
Model
Jetway V1456VQH-A
Description
FCC only
Operating Systems
Windows XP
Version Driver
67-0000C6Q Rev01
Size Driver
165Kb
File Name
vqha2000.zip
Info
[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=ambienth.cat
DriverVer=03/03/2000,3.22.0.0
;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Ambient Technologies"
ModemName = "Ambient HaM Data Fax"
InstDiskName = "HaM Installation Disk"
;----------------------------------------------------------------------------
[Manufacturer]
%Oem% = Oem
[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12
[SourceDisksNames]
1=%InstDiskName%,,
[SourceDisksFiles]
ham.sys=1
ambienth.cat=1
[CopyFileSection]
ham.sys,,,2
ambienth.cat
[ControlFlags]
ExcludeFromSelect=UNIMODEM9AF00468
ExcludeFromSelect=PCI\VEN_1813&DEV_4000
ExcludeFromSelect=PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02
[Oem]
%ModemName% = HaM, PCI\VEN_1813&DEV_4000, PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02, UNIMODEM9AF00468
[HAM.NT]
AddReg = Modem.AddReg,HaM.AddReg
CopyFiles = CopyFileSection
;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[HAM.NT.Services]
AddService = HAM, 0x00000000, HAM_Service_Inst, HAM_EventLog_Inst
;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[HAM_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\ham.sys
LoadOrderGroup= Base
AddReg = HAM_Service_Inst_Addreg
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Oem%
CatalogFile=ambienth.cat
DriverVer=03/03/2000,3.22.0.0
;----------------------------------------------------------------------------
;
; Modifiable strings used by this INF file
;
;----------------------------------------------------------------------------
[Strings]
Oem = "Ambient Technologies"
ModemName = "Ambient HaM Data Fax"
InstDiskName = "HaM Installation Disk"
;----------------------------------------------------------------------------
[Manufacturer]
%Oem% = Oem
[DestinationDirs]
CopyFileSection = 12
DefaultDestDir = 12
[SourceDisksNames]
1=%InstDiskName%,,
[SourceDisksFiles]
ham.sys=1
ambienth.cat=1
[CopyFileSection]
ham.sys,,,2
ambienth.cat
[ControlFlags]
ExcludeFromSelect=UNIMODEM9AF00468
ExcludeFromSelect=PCI\VEN_1813&DEV_4000
ExcludeFromSelect=PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02
[Oem]
%ModemName% = HaM, PCI\VEN_1813&DEV_4000, PCI\VEN_1813&DEV_4000&SUBSYS_1033144F&REV_02, UNIMODEM9AF00468
[HAM.NT]
AddReg = Modem.AddReg,HaM.AddReg
CopyFiles = CopyFileSection
;----------------------------------------------------------------------------
; install modem driver as a service under services\%ModemName%
; refers to lower section for details of service key entry
;----------------------------------------------------------------------------
[HAM.NT.Services]
AddService = HAM, 0x00000000, HAM_Service_Inst, HAM_EventLog_Inst
;----------------------------------------------------------------------------
; type=kernel driver start=manual, pnp will start
;----------------------------------------------------------------------------
[HAM_Service_Inst]
DisplayName = %ModemName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\ham.sys
LoadOrderGroup= Base
AddReg = HAM_Service_Inst_Addreg
