Hermstedt Leonardo XL Download Drivers

Contents

1. Basics
2. News
3. Installation of the drivers
4. Installation of the TAPI-Modems
5. Un-installing a Hermstedt ISDN adapter and Software
6. Hermstedt ISDN System Manager (ISM)

===================================================================
1. Basics
---------

For Windows 2000 the following drivers are available:

1. CAPI - Driver provides the CAPI 2.0 32 bit interface

2. WAN - Driver supports WAN Networking connections, Internet- and Remote Access connections

3. Virtual COM Port Driver emulates serial ports e.g. COM3 or COM4. So common Fax- and Terminalprograms
could be used. Fax und Modem capabilities are only available using
the PanPro Modul for SP/XL or using Leonardo SL.
Using a Hermstedt ISDN card and the software drivers which accompany it, you can connect your PC to many
other computers using NT's Remote Access Service (RAS). In Windows 2000 this service is called
"Dial-Up Networking".
2. News
-------

Version 417:
------------
- Support for Leonardo X card family

Version 416
------------
- Problem of accepting calls if more than one registered application fixed
- Bug in Marco SL installation fixed
- Updated firmware files

Version 415
------------
- Support for T.30 Extended Protokoll (fax polling) over CAPI
- Support for Overlapped Receiving
- Limitation of 30 registerable CAPI applications removed

Version 413:
------------
- Supports Angelo VX and Marco SL

Version 411:
------------
- These drivers could be used for Windows XP installation too.

Version 403:
------------
- Supports now LeoUSB

Version 402:
------------
- Multiple COM Ports could be configured with the same MSN

Contents
--------

1. News
2. Installation
3. Un-installing
4. Hermstedt ISDN System Manager (ISM)

==================================================================

1. News
-------

Version 417:
------------
- Support for Leonardo X card family

Version 416
------------
- Problem of accepting calls if more than one registered application fixed
- Bug in Marco SL installation fixed
- Updated firmware files

Version 415
------------
- Support for T.30 Extended Protokoll (fax polling) over CAPI
- Support for Overlapped Receiving
- Limitation of 30 registerable CAPI applications removed

Version 413:
----------------
- supports Marco SL

Version 403:
------------
- supports now LeoUSB
Version 402:
------------
- To install Leonardo cards under Windows ME the Windows 98 drivers should
be used.
Version 401:
------------
- Support for LeoShare Servers in the Hermstedt ISDN System Manager (ISM).

Version 400:
------------
- To configure the Hermstedt ISDN Adapters and services the new Control Panel application
"ISDN System Manager" will be installed with the drivers.
A description of this program can you find in chapter 4 in this document.

2. Installation
---------------
If whilst installing the card you cancel the dialog box which allows you to
install from a disk provided from another manufacturer, when the machine
boots, the Hermstedt card will appear as an "Other Device" within Device
Manager. If this occurs, the card has not been installed correctly. Please
delete the card by checking the line "other device" in Device Manager and
then click "Remove" and follow the steps laid out the installation
procedure below.

Similarly, if you wish to update from a previous driver, you will have to
follow this "Remove and reboot" procedure. In this case, please mark the
entry under "Network Adapter" and then click "Remove".

Contents

1. Basics
2. News
3. Tips for Installation
4. Setup on Windows NT 4.0
5. Installation of the TAPI-Modems
6. Un-installing a Leonardo ISDN adapter and Software
7. Hermstedt ISDN System Manager (ISM)

===================================================================
1. Basics
---------
It is recommended to use Service Pack 5.

For Windows NT the following drivers are available:

1. CAPI - Driver provides the CAPI 2.0 32 bit interface

2. WAN - Driver supports WAN Networking connections, Internet- and Remote Access connections

3. Virtual COM Port Driver emulates serial ports e.g. COM3 or COM4. So common Fax- and Terminalprograms
could be used. Fax und Modem capabilities are only available using
the PanPro Modul for SP/XL or using Leonardo SL.
When installation of the Leonardo ISDN card is complete, the card appears in Device Manager as a
Network Adapter. To access the card's file transfer capabilities, please install the
Leonardo da Windows Software, too.
Using a Hermstedt ISDN card and the software drivers which accompany it, you can connect your PC to many
other computers using NT's Remote Access Service (RAS). In Windows NT 4.0 this service is called
"Dial-Up Networking".
It is also possible to connect to the Internet using TCP/IP. With Windows NT 4.0 it's possible to
combine two or more channels to provide one very fast RAS Port running at 128.000 kbp/s as Windows NT
has Multi-link PPP built into the OS.

2. News
-------

Version 417:
------------
- Support for Leonardo X card family

Version 416
------------
- Problem of accepting calls if more than one registered application fixed
- Bug in Marco SL installation fixed
- Updated firmware files

Version 415
------------
- Support for T.30 Extended Protokoll (fax polling) over CAPI
- Support for Overlapped Receiving
- Limitation of 30 registerable CAPI applications removed

Version 413:
------------
- Supports Angelo VX and Marco SL

Version 402:
------------
- Multiple COM Ports could be configured with the same MSN

Version 400:
------------
- To configure the Hermstedt ISDN Adapters and services the new Control Panel application
"ISDN System Manager" will be installed with the drivers.
A description of this program can you find in chapter 7 in this document.