Harmony HM18022C Download Drivers

[Version]
Signature="$CHICAGO$"
Class=MEDIA
provider=%PROV%
;Catalogfile=w98file.cat
;Catalogfile.NT=ntfile.cat
DriverVer=10/02/2001,1.03

[ClassInstall]
Addreg=Class.AddReg

[Class.AddReg]
HKR,,,,%MediaClassName%
HKR,,Icon,,"-1"
HKR,,Installer,,mmci.dll

[Manufacturer]
%MfgName%=Microsoft

[Microsoft]
; the device id's (MODEMWAVE\IC+_56k_Internal_Data_Fax_Voice_Modem)
; correspond EXACTLY to the modem name with underscores in place of spaces.
; the names must be an exact match or installer won't find device.
; this scheme is because of the way the serial wave device enumeration occurs.

; serial wave device - imaadpcm driver
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\IC+_56k_Internal_Data_Fax_Voice_Modem
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\TOPIC_56k_Internal_Data_Fax_Voice_Modem
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\IC+_56k_External_Data_Fax_Voice_Modem
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\TOPIC_56k_External_Data_Fax_Voice_Modem
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\IC+_56k_External_Data_Fax_Voice_Modem_Pnp
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\IC+VoiceModemWave
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\HALFDUPLEX
%IcplusSerial.DeviceDesc%=MSSERWAVE, MODEMWAVE\ICPLUS

[PreCopySection]
HKR,,NoSetupUI,,1

[MSSERWAVE]
AddReg=MSSERWAVE.AddReg

[MSSERWAVE.AddReg]
HKR,,DevLoader,,mmdevldr.vxd
HKR,Drivers,MIGRATED,,0
HKR,Drivers\wave,,,
HKR,,Driver,,serwave.vxd
HKR,Drivers\wave\serwvdrv.drv,Description,,%Serial.DeviceDesc1%
HKR,Drivers\wave\serwvdrv.drv,Description,,%Serial.DeviceDesc2%
HKR,Drivers\wave\serwvdrv.drv,Driver,,serwvdrv.drv
HKR,Drivers,SubClasses,,"wave"
HKR,Config,XformModule, , "umdmxfrm.dll"
HKR,Config,XformID, 1, 08, 00, 00, 00 ; 8-bit PCM 8000 Hz
HKR,Config,BaudRate, 1, 00, c2, 01, 00 ; 11520bps
HKR,Config,WaveDevices, 1, 02, 00 ; support playback and record
; in handset and line

[Strings]
PROV="IC Plus "
MfgName="IC Plus"
Serial.DeviceDesc="Voice Modem Serial Wave Device"
IcplusSerial.DeviceDesc="Voice Modem Serial Wave Device"
;TopicSerial.DeviceDesc="Topic Voice Modem Wave Device"
MediaClassName="Sound, video and game controllers"

[Version]
SIGNATURE="$CHICAGO$"
CLASS=Modem
CLASSGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
PROVIDER=%Mfg%
DriverVer=04/24/2003, 11.0300.0014
;CatalogFile=mdmchipv.cat

[DestinationDirs]
DefaultDestDir = 11

[Manufacturer]
%Mfg% = Models

[ControlFlags]
ExcludeFromSelect=WDM_MODEM\PCT0001

[Models]
%Modem% = Modem,WDM_MODEM\PCT0001

; Installation sections
[Modem]
AddReg=All, MfgAddReg, Modem.AddReg, WDMAddReg, V44AddReg, PCTEL_VOICE_ALL, PCTEL_VOICE_SERWAVE, PCTEL_SPKPHONE_SERWAVE

; AddReg sections
[Modem.AddReg]
HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 00,00,00,00, 0f,00,00,00, f7,07,00,00, 00,c2,01,00, C0,DA,00,00
; User visible strings
[Strings]
Mfg = "PCtel"
Modem="HSP56 Modem"
ID1 = "Modem Setup Disk"
; --------------------------------------------------------------
; Common Registry Sections
; The [All] section is installed for all modems.
[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"

[WDMAddReg]
HKR,, DeviceType, 1, 01
HKR,,PortDriver,,wdmmdmld.vxd
HKR,,Contention,,0

[MfgAddReg]
HKR,, InactivityScale, 1, 0a,00,00,00
HKR,, InactivityFormat,, "seconds"
HKR, Init, 1,, "AT"
HKR, Init, 2,, "AT&FE0&C1&D2&K3V1W3S0=0"
HKR, Monitor, 1,, "ATS0=0"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH"
HKR, Answer, 1,, "ATA"
HKR,, Reset,, "AT&F"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, ""
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, SpeakerVolume_Low,, "L1"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"

[Version]
SIGNATURE="$CHICAGO$"
CLASS=Modem
CLASSGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
PROVIDER=%Mfg%
DriverVer=04/24/2003, 11.0300.0014
CatalogFile=mdmchipv.cat

[DestinationDirs]
DefaultDestDir = 11

[Manufacturer]
%Mfg% = Models

[ControlFlags]
ExcludeFromSelect=WDM_MODEM\PCT0001

[Models]
%Modem% = Modem,WDM_MODEM\PCT0001

; Installation sections
[Modem]
AddReg=All, MfgAddReg, Modem.AddReg, WDMAddReg, V44AddReg, PCTEL_VOICE_ALL, PCTEL_VOICE_SERWAVE, PCTEL_SPKPHONE_SERWAVE

; AddReg sections
[Modem.AddReg]
HKR,, Properties, 1, 80,01,00,00, ff,00,00,00, ff,00,00,00, 00,00,00,00, 0f,00,00,00, f7,07,00,00, 00,c2,01,00, C0,DA,00,00
; User visible strings
[Strings]
Mfg = "PCtel"
Modem="HSP56 MicroModem"
ID1 = "Modem Setup Disk"
; --------------------------------------------------------------
; Common Registry Sections
; The [All] section is installed for all modems.
[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"

[WDMAddReg]
HKR,, DeviceType, 1, 01
HKR,,PortDriver,,wdmmdmld.vxd
HKR,,Contention,,0

[MfgAddReg]
HKR,, InactivityScale, 1, 0a,00,00,00
HKR,, InactivityFormat,, "seconds"
HKR, Init, 1,, "AT"
HKR, Init, 2,, "AT&FE0&C1&D2&K3V1W3S0=0"
HKR, Monitor, 1,, "ATS0=0"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH"
HKR, Answer, 1,, "ATA"
HKR,, Reset,, "AT&F"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, ""
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, SpeakerVolume_Low,, "L1"
HKR, Settings, SpeakerVolume_Med,, "L2"
HKR, Settings, SpeakerVolume_High,, "L3"
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "&K0"
HKR, Settings, FlowControl_Hard,, "&K3"

How to Install PCtel HSP Modems on Windows NT Workstation 4.0

Contents:
i. PnP modem installation
ii. Non-PnP/PCI modem installation
iii. PCMCIA modem installation
iv. Uninstall the PCtel HSP Modem

i. PnP modem installation

Before installing PCtel modem drivers, the PnP ISA Enabler driver must
be installed. The driver library on the Windows NT 4.0 CD-ROM includes the
PnP ISA Enabler driver, which will allow the detection and installation of
Plug and Play devices in Windows NT 4.0. Install the PnP ISA Enabler
driver (PNPISA) using the following steps:

NOTE: Although Windows NT includes PNPISA to detect Plug and Play
devices, Plug and Play devices are not supported in Windows NT 4.0.
PNPISA is provided as a "use at your own risk" tool.

1. Locate the "Pnpisa.inf" file in the Drvlib\Pnpisa\x86 folder on the
Windows NT 4.0 CD-ROM.

2. Use the right mouse button to click the "Pnpisa.inf" file, and then click
"Install" on the menu that appears.

3. Restart the computer.

After you restart your computer, you may receive a message that
Windows NT has detected your Plug and Play device(s). If your Plug and
Play modem is not detected try installing PNPISA again, unplug your
modem card, reboot your computer and try again.

When the modem has been detected, use the following steps:

1. Install the new device from the modem driver disk.

2. When Windows NT finishes the modem setup, restart the computer.
ii. Nonpnp/PCI modem installation

1. Open "Control Panel" and click on the "Ports" CPL.

2. Double click the "Add" button and set to available I/O base address
and IRQ. Make sure there is no hardware resource conflicts. You can use
"Windows NT Diagnostics" in the Administrative Tools to browse resources.

3. Go to "Control Panel" and click on the "Modems".

4. Add a new modem from the "MDMCHPIV.INF" file on the driver disk and
attach the modem to the port that you have just added.

5. When Windows NT finishes the modem setup, return to the "Control Panel".
On the menu bar, click "View" and then click "Refresh".

6. Go to "Control Panel" and click on the "PCtel Port".

7. Choose the port attached your modem and click OK.

8. Restart the computer.

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%Mfg%
DriverVer=04/24/2003, 11.0300.0014
CatalogFile=mdmchipv.cat

[DestinationDirs]
DefaultDestDir = 12
DefaultCopy = 12
DataCopy = 11

[Manufacturer]
%Mfg% = Models

[ControlFlags]
ExcludeFromSelect=PCI\VEN_134D&DEV_2189&SUBSYS_1002134D
;
; Modem models
;
[Models]
%Modem1% = Modem,PCI\VEN_134D&DEV_2189&SUBSYS_1002134D

[Modem.NT]
AddReg=All, MfgAddReg, Modem.AddReg, V44AddReg, PCTEL_VOICE_ALL,PCTEL_VOICE_SERWAVE,PCTEL_SPKPHONE_SERWAVE
CopyFiles = DefaultCopy, DataCopy

;
; User visible strings
;
[Strings]
Mfg = "PCtel"
; Model strings
Modem1="HSP56 MicroModem"
ID1="Disk 1"
;

[DefaultCopy]
ptserial.sys,,,6
vpctcom.sys,,,6
vmodem.sys,,,6
vvoice.sys,,,6

[DataCopy]
pctspk.exe,,,6
PV92Tray.exe,,,6
ptuninst.exe,,,6
ptsetup.dll,,,6

[SourceDisksNames]
1=%ID1%

[SourceDisksFiles]
ptserial.sys=1
vpctcom.sys=1
vmodem.sys=1
vvoice.sys=1
pctspk.exe=1
PV92Tray.exe=1
ptuninst.exe=1
ptsetup.dll=1

[Modem.NT.Services]
AddService=Ptserial,0x00000000,Ptserial_Service_Inst
AddService=Vpctcom,0x00000000,Vpctcom_Service_Inst
AddService=Vmodem,0x00000000,Vmodem_Service_Inst
AddService=Vvoice,0x00000000,Vvoice_Service_Inst