Harmony 18026-1 Download Drivers

Available 3 files for 18026-1
Company
Harmony
Categories
Fax & Modem & ISDN
Model
Harmony 18026-1
Description
Drivers
Operating Systems
Windows 2000
Size Driver
3.2Mb
File Name
win2000.zip
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Known issues
6) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of Pegas.USB is compatible only with Microsoft Windows 98.

2) If Pegas.USB is already installed in your system and you want to re-install
new version, first uninstall Pegas.USB (See Uninstall Procedure), and only
then proceed to install new version.
To install Pegas.USB for the first time:
-------------------------------------------
a) Plug in the Pegas.USB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the Pegas.USB install diskette in the floppy drive or
CD-ROM drive.
d) Pegas.USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that Pegas.USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that Pegas.USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then Pegas.USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall Pegas.USB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) Pegas.USB drivers will be uninstalled.
f) You may un-plug the Pegas.USB from the USB port.
Company
Harmony
Categories
Fax & Modem & ISDN
Model
Harmony 18026-1
Description
Drivers
Operating Systems
Windows 95-98-98Se
Size Driver
4.5Mb
File Name
win95_98.zip
Info
[Version]
Signature="$Windows95$"
Class=MEDIA ;; needed - this is a wave driver, so gets installed in media
provider=%MFR%

[ClassInstall]
Addreg=Class.AddReg ;; standard media stuff

[Class.AddReg] ;; standard media stuff
HKR,,,,%MediaClassName%
HKR,,Icon,,"-1"
HKR,,Installer,,mmci.dll

[Manufacturer]
%MFR%=PCtel

[PCtel]
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PNP_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PCMCIA_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PCI_Modem

[DEVICE1]
AddReg=MSSERWAVE.AddReg, DEVICE1.AddReg
[DEVICE1.AddReg]
HKR,Drivers\wave\serwvdrv.drv,Description,,%Device1.DeviceDesc%
HKR,Config,XformModule, , "umdmxfrm.dll"
HKR,Config,XformID, 1, 04, 00, 00, 00
HKR,Config,WaveDevices, 1, 02, 00 ;; normally, have 2 wave devices, line and
;; handset. If handset is not supported
;; only have 1 wave device, so serwvdrv
;; needs to know this so it only reports
;; one device. If this entry is omitted
;; default is 2

[MSSERWAVE.AddReg] ;; this stuff should never change
HKR,,DevLoader,,mmdevldr.vxd
HKR,Drivers,MIGRATED,,0
HKR,Drivers\wave,,,
HKR,,Driver,,serwave.vxd
HKR,Drivers\wave\serwvdrv.drv,Driver,,serwvdrv.drv
HKR,Drivers,SubClasses,,"wave"

[Strings]
MFR="PCtel, Inc."
Device1.DeviceDesc="PCtel Serial Wave Device"
Company
Harmony
Categories
Fax & Modem & ISDN
Model
Harmony 18026-1
Description
Drivers
Operating Systems
Windows NT4
Size Driver
3.4Mb
File Name
nt40.zip
Info
How to Install PCtel HSP Modems on Windows NT Workstation 4.0

Contents:
i. PnP modem installation
ii. Non-PnP/PCI modem installation
iii. PCMCIA modem installation
iv. Uninstall the PCtel HSP Modem

i. PnP modem installation

Before installing PCtel modem drivers, the PnP ISA Enabler driver must
be installed. The driver library on the Windows NT 4.0 CD-ROM includes the
PnP ISA Enabler driver, which will allow the detection and installation of
Plug and Play devices in Windows NT 4.0. Install the PnP ISA Enabler
driver (PNPISA) using the following steps:

NOTE: Although Windows NT includes PNPISA to detect Plug and Play
devices, Plug and Play devices are not supported in Windows NT 4.0.
PNPISA is provided as a "use at your own risk" tool.

1. Locate the "Pnpisa.inf" file in the Drvlib\Pnpisa\x86 folder on the
Windows NT 4.0 CD-ROM.

2. Use the right mouse button to click the "Pnpisa.inf" file, and then click
"Install" on the menu that appears.

3. Restart the computer.

After you restart your computer, you may receive a message that
Windows NT has detected your Plug and Play device(s). If your Plug and
Play modem is not detected try installing PNPISA again, unplug your
modem card, reboot your computer and try again.

When the modem has been detected, use the following steps:

1. Install the new device from the modem driver disk.

2. When Windows NT finishes the modem setup, restart the computer.
ii. Nonpnp/PCI modem installation

1. Open "Control Panel" and click on the "Ports" CPL.

2. Double click the "Add" button and set to available I/O base address
and IRQ. Make sure there is no hardware resource conflicts. You can use
"Windows NT Diagnostics" in the Administrative Tools to browse resources.

3. Go to "Control Panel" and click on the "Modems".

4. Add a new modem from the "MDMCHPIV.INF" file on the driver disk and
attach the modem to the port that you have just added.

5. When Windows NT finishes the modem setup, return to the "Control Panel".
On the menu bar, click "View" and then click "Refresh".

6. Go to "Control Panel" and click on the "PCtel Port".

7. Choose the port attached your modem and click OK.

8. Restart the computer.
HelpDrivers Since March 2000