Harmony 18021 Download Drivers

Available 2 files for 18021
Company
Harmony
Categories
Fax & Modem & ISDN
Model
Harmony 18021
Description
Drivers
Operating Systems
Windows 95-98-98Se
Size Driver
782Kb
File Name
win95_98.zip
Info
[Version]
Signature="$Windows95$"
Class=MEDIA ;; needed - this is a wave driver, so gets installed in media
provider=%MFR%

[ClassInstall]
Addreg=Class.AddReg ;; standard media stuff

[Class.AddReg] ;; standard media stuff
HKR,,,,%MediaClassName%
HKR,,Icon,,"-1"
HKR,,Installer,,mmci.dll

[Manufacturer]
%MFR%=PCtel

[PCtel]
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PNP_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PCMCIA_Modem
%Device1.DeviceDesc%=DEVICE1, MODEMWAVE\V.90_K56Flex_HSP_PCI_Modem

[DEVICE1]
AddReg=MSSERWAVE.AddReg, DEVICE1.AddReg
[DEVICE1.AddReg]
HKR,Drivers\wave\serwvdrv.drv,Description,,%Device1.DeviceDesc%
HKR,Config,XformModule, , "umdmxfrm.dll"
HKR,Config,XformID, 1, 04, 00, 00, 00
HKR,Config,WaveDevices, 1, 02, 00 ;; normally, have 2 wave devices, line and
;; handset. If handset is not supported
;; only have 1 wave device, so serwvdrv
;; needs to know this so it only reports
;; one device. If this entry is omitted
;; default is 2

[MSSERWAVE.AddReg] ;; this stuff should never change
HKR,,DevLoader,,mmdevldr.vxd
HKR,Drivers,MIGRATED,,0
HKR,Drivers\wave,,,
HKR,,Driver,,serwave.vxd
HKR,Drivers\wave\serwvdrv.drv,Driver,,serwvdrv.drv
HKR,Drivers,SubClasses,,"wave"

[Strings]
MFR="PCtel, Inc."
Device1.DeviceDesc="PCtel Serial Wave Device"
Company
Harmony
Categories
Fax & Modem & ISDN
Model
Harmony 18021
Description
Drivers
Operating Systems
Windows NT4
Size Driver
1Mb
File Name
nt40.zip
Info
How to Install PCtel HSP Modems on Windows NT Workstation 4.0

Contents:
i. PnP modem installation
ii. Non-PnP/PCI modem installation
iii. PCMCIA modem installation
iv. Uninstall the PCtel HSP Modem

i. PnP modem installation

Before installing PCtel modem drivers, the PnP ISA Enabler driver must
be installed. The driver library on the Windows NT 4.0 CD-ROM includes the
PnP ISA Enabler driver, which will allow the detection and installation of
Plug and Play devices in Windows NT 4.0. Install the PnP ISA Enabler
driver (PNPISA) using the following steps:

NOTE: Although Windows NT includes PNPISA to detect Plug and Play
devices, Plug and Play devices are not supported in Windows NT 4.0.
PNPISA is provided as a "use at your own risk" tool.

1. Locate the "Pnpisa.inf" file in the Drvlib\Pnpisa\x86 folder on the
Windows NT 4.0 CD-ROM.

2. Use the right mouse button to click the "Pnpisa.inf" file, and then click
"Install" on the menu that appears.

3. Restart the computer.

After you restart your computer, you may receive a message that
Windows NT has detected your Plug and Play device(s). If your Plug and
Play modem is not detected try installing PNPISA again, unplug your
modem card, reboot your computer and try again.

When the modem has been detected, use the following steps:

1. Install the new device from the modem driver disk.

2. When Windows NT finishes the modem setup, restart the computer.
ii. Nonpnp/PCI modem installation

1. Open "Control Panel" and click on the "Ports" CPL.

2. Double click the "Add" button and set to available I/O base address
and IRQ. Make sure there is no hardware resource conflicts. You can use
"Windows NT Diagnostics" in the Administrative Tools to browse resources.

3. Go to "Control Panel" and click on the "Modems".

4. Add a new modem from the "MDMCHPIV.INF" file on the driver disk and
attach the modem to the port that you have just added.

5. When Windows NT finishes the modem setup, return to the "Control Panel".
On the menu bar, click "View" and then click "Refresh".

6. Go to "Control Panel" and click on the "PCtel Port".

7. Choose the port attached your modem and click OK.

8. Restart the computer.
HelpDrivers Since March 2000