Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2900-i
Description
Release Note for Firmware
Operating Systems
Document PDF
Version Firmware
2.5.6
Size Firmware
9Kb
File Name
59096f7bb86058205939e4d65f51a70120090226071709324168-releasenote.pdf
Info
Release Notes for Vigor2900 Series
Firmware Version : v2.5.6
Release Date : 11 Nov 2005
Applied Models : Vigor2900, Vigor2900i, Vigor2900G, and
Vigor2900Gi
Please ensure you download and use the latest router tools when
upgrading the firmware.
[New Features]:
- Add Firewall/MAC Address Control with time schedule
- Add Firewall/IM Blocking function
- Support IKE/IPSEC DPD function
- Provide Internet Access through L2TP protocol
- Support Wireless WPA2 security mode (It's supported in wireless
hardware version 2
or above.)
[Improvements]
- Expand number of NAT sessions from 2500 to 7500
- Add "WAN IP Alias" in PPPoE Internet access mode
- Add subnet selection of Relay Agent in DHCP Server Configuration
- Support IP range in IP filter rules
- Add time schedule function in IP filter
- Use better mechanism to defense DOS attacks
- Add time schedule function in P2P blocking
- Add an option to disallow eDonkey upload traffic in P2P blocking
- Use new time schedule function in URL content filter
- Add a selection of allow/block websites matching keywords in URL
content filter
- Add a telnet command("ip dns") to set the DNS server used by router
- Add a telnet command("mngt log") to log the router management
information to syslog
- Use more secure option in MPPE negotiation
- Add IKE phase 2 proposal in LAN-to-LAN advanced setup
- Display more detail information in NAT session table
- Support NAT loopback for 2nd subnet
- Prevent assigning conflicting IP to DHCP clients after router reboot
[Corrected Problems]
- Buffer leakage caused by L2TP StopCCN messages
- IP filter failed to handle port 65535
- Call schedule not working for VPN profiles 17-32
- Can not set More route for Lan-to-Lan VPN profiles 17-32
- Unable to set VLAN and Port Rate Control by FireFox
- FTP traffic unable to pass NAT
- Qos rules deleted by Advanced setting will appear in Basic setting
after reboot
- Inactive Qos rules will be actived after reboot
[Notes]
- How to find the Wireless Hardware Version:
In the "Wireless LAN Setup" > "Wireless Information" > "Firmware
Version", the last
digit is the Wireless Hardware Version. For example, v1.2.8.16.04.2
means the
wireless hardware version is 2.
- Time schedule of IP filter, MAC Address Control, P2P/IM blocking and
URL filter:
Each of these firewall functions has 4 time schedule profiles. Each
profile
represents one of the 15 profiles in Advanced Setup/Call Schedule
Setup. Note that
only time settings in the profile are used by firewall functions.
Other settings
like Action and Idle Timeout will be ignored by firewall functions.
- MAC Address Control:
Can be used to assign the time that a MAC is allowed to pass the
router. It can also
be used to filter MACs that are not explicit specified in the list.
Note that this
function only checks source MAC of packets from LAN side.
- DOS Defense:
The way to defense flooding attacks before this release depends on
the total number
of attacks detected on the WAN interface. In this release, each port
will detect the
number of attacks and defense themselves when threshold is reached.
DOS defense function also works on LAN interface.