Draytek Vigor2600G series Download Firmware

The Release Notes for Vigor2600 plus series
Firmware Version : 2.5.9
Release Date : Jan 27, 2006
Applied Models : Vigor2600plus,2600G,2600i,2600Gi

(1)For Annex A Model,
1> "v26ga259.xxx" is with ADI firmware 42E2EA53. (Standard)
2> "v26gk259.xxx" is with ADI firmware 41E2BE2C.
(Recommended for UK)
3> "v26g0259.xxx" is with ADI firmware 43E2EAA1.
(Recommended for high dB users which are using
ADSL extended line on UK)
4> "v26gn259.xxx" is with ADI firmware 44E2EA17.
(New modem code,try this one if meet dsl sync issue)
5> "v26gc259.xxx" is with ADI firmware 40E2BE29.
(Recommended for Netherland)
6> "v26gi259.xxx" is with ADI firmware 43E2EAD4.
(Recommended for Italy and Taiwan High Rate ADSL line)
7> "v26gx259.xxx" is with ADI firmware 43E2EA9F.
(Recommended for G.Lite only)
(2)For Annex B Model,
1> "v26gb259.xxx" is with ADI firmware 40E3BE15. (Standard)
2> "v26gy259.xxx" is with ADI firmware 41E4EA0B.
(Recommended for Germany, Portugal)
3> "v26gz259.xxx" is with ADI firmware 40E4BEA9.
(Recommanded for Czech,Greece,Slovakia)
4> "v26gg259.xxx" is with ADI firmware 40E4BE96.
Please ensure you download and use the latest router tools when
upgrading the firmware.
[Supported Models]:
1. Vigor2600plus,2600G,2600i,2600Gi
[Corrected Problems]:
1.Apply IP Filter to VPN tunnels
[Hint]
1. How to find the Wireless Hardware Version:
In the "Wireless LAN Setup" > "Wireless Information" > "Firmware
Version", the last
digit is the Wireless Hardware Version. For example, v1.2.8.16.04.2
means the
wireless hardware version is 2.
2. If you have any ADSL on-line problem, please contact your service
provide at first,
or get into web user interface ("Internet Access Setup" >
"PPPoE/PPPoA" or "MPoA") to change
the "Modulation" of "DSL Modem Settings" to "T1.413", then to try
again. Also, you can use
the following Telnet commands to tune your router working with
Globespan chipset DSLAM :
> adsl status Get DSLAM chipset verdor information
> adsl dslam gspn Set ADSL parameters compatible with the
Globespan chipset DSLAM
> adsl dslam default Set ADSL parameters to fatory default
settings

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with ADI firmware 42E2EA53 for Standard

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with ADI firmware 41E2BE2C for the UK

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with ADI firmware 43E2EAA1 for high dB users which are using ADSL extended line on the UK

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with ADI firmware 40E2BE29 for the Netherlands

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with ADI firmware 43E2EAD4 for Italy , Taiwan High Rate ADSL line

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexA with with ADI firmware 44E2EA17, try this one if meet dsl sync issue

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexB with ADI firmware 40E3BE15 for Standard

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexB with ADI firmware 40E4BEA9 for Czech, Greece, Slovakia

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexB with ADI firmware 41E4EA0B for Germany , Portugal

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 1 or 2.
3. Please Download Firmware 2.5.9.
4. AnnexB with ADI firmware 40E4BE96

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with ADI firmware 42E2EA53 for Standard

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with ADI firmware 41E2BE2C for the UK

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with ADI firmware 43E2EAA1 for high dB users which are using ADSL extended line on the UK

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with ADI firmware 40E2BE29 for the Netherlands

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with ADI firmware 43E2EAD4 for Italy , Taiwan High Rate ADSL line

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexA with with ADI firmware 44E2EA17, try this one if meet dsl sync issue

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexB with ADI firmware 40E3BE15 for Standard

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexB with ADI firmware 40E4BEA9 for Czech, the Netherlands , Greece, Slovakia

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexB with ADI firmware 41E4EA0B for Germany , Portugal

1. Check the last digit of Wireless LAN Firmware version via Router Web Configurator > Wireless LAN Setup page.
2. If the last digit of Wireless information is 3.
3. Please Download Firmware 2.5.9(3).
4. AnnexB with ADI firmware 40E4BE96

Introduction
The term Virtual TA means the local Ethernet-connected hosts or PCs use popular
CAPI-based software such as RVS-COM or BVRP etc. to access the router as a local
ISDN TA for FAX sending or receiving via the ISDN line. Basically, it is a client/server
network model. The Virtual TA server built into the router handles the connection establishment
and release. The Virtual TA client, installed in the Ethernet-connected host, creates
a CAPI-based driver to relay all CAPI messages between applications and the router
CAPI module.

Note:
1. The Virtual TA client is only supported on MicrosoftTM Windows 95 OSR2.1/
98/98SE/Me/2000/XP platforms.
2. The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in
FAX engine.
3. One ISDN BRI interface only has two B channels.
The maximum number of active clients is also 2.
4. Before you set up the Virtual TA, you must set the correct country code.
Click ISDN Setup in the Basic Setup group.
As the following application chart shows, the Virtual TA client can make an outgoing call or
accept an incoming call to/from a peer FAX machine or ISDN TA etc.

Installing a Virtual TA Client
1. Insert the CD-ROM supplied with your Vigor router, or directly double-click the installer
file. Vsetup95.exe is for Windows 95 OSR2.1 or higher, Vsetup98.exe is for Windows 98,
98SE and Me, and Vsetup2k.exe is for Windows 2000/XP.
2. Follow on-screen instructions of the installer. The last step requires you to restart your
computer. Click OK to restart.
3. After the computer restarts, you will see a VT icon on the taskbar.

Configuring a Virtual TA Client/ Server
The Virtual TA application is a client/server model. You must set it up on both ends to
operate your Virtual TA application.
By default, the Virtual TA server is enabled and the username and password fields are
blank. Any Virtual TA client may login to the server. Once a single Username and Password
field has been filled, the Virtual TA server will only allow clients with a valid username
and password to login.

Virtual TA Server:
Enable: Check to activate the server.
Disable: Check to deactivate the server. All Virtual TA applications will be
stopped.
Virtual TA User Profiles:
Username: Specifies the username for a specific client.
Password: Specifies the password for a specific client.
MSN1, MSN2, MSN3: MSN stands for Multiple Subscriber Number. It means
you can subscribe to more than one ISDN line number on a single subscribed
line. Note that the service must be subscribed to with your telecom. Specifies
the MSN numbers for a specific client. If you have no MSN services, leave this
field blank.
Active: Check to enable the client to access the server.

Quickly connect your router to the Internet
Check your router package for the following items :
The Router
1 printed Quick Start Guide with warranty/ registration card
1 CD includes detailed User Manual in electronic form, released firmware and
utilities
1 AC power supply adapter (black)
1 Ethernet LAN cable (blue) for connection to a computer or hub
1 ADSL line cable (RJ-11 to RJ-45 for Switzerland and the Netherlands only)
(RJ-11 to RJ-11 for other Annex A countries)
(RJ-45 to RJ-45 for Annex B countries)
1 ISDN line cable (RJ-45, black) for Vigor2600i and Gi only
2 external antennas for V2600G and V2600Gi only.
Please read page 9,10
Your router package should contain all these items. If any item is
missing or damaged, contact your dealer or our Customer Service
Department immediately.
The Vigor2600 puls series all contain Annex A/Annex B models,
please check if the package is suitble for your use by checking the
information from bottom of Vigor2600 plus series router.
Annex A : is for connecting to an analog POTS line
Annex B : is for connecting to a digital ISDN line

DSL Parameters
The following DSL parameters are required from your ISP :
1. The VPI/VCI of the virtual channel to use on the DSL line
2. Protocol : PPPoE, PPPoA or MPoA (RFC1483/2684)
3. Encapsulation Method : LLC/SNAP or VCMUX
4. Modulation Method : T1.413, G.lite, G.DMT
DSL line
Depending on the variant Vigor2600 plus series you purchased, the following DSL
service must be available at your local premisses:
For Annex A : A DSL service must be enabled on your POTS telephone line.
For Annex B : A DSL service must be enabled on your ISDN telephone line.
(Vgior2600 plus series provides Multimode which can automatically
detect)