Draytek Vigor2500-We Download Firmware

Available 10 files for Vigor2500-We
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
Release Note for Firmware
Operating Systems
Document PDF
Version Firmware
2.57
Size Firmware
32Kb
File Name
59096f7bb86058205939e4d65f51a70120090226061613954615-releasenote.pdf
Info
Release Notes for Vigor2500 router series Firmware
Firmware Version : v2.57
Released : Formal Release
Applied Models : Vigor2500, Vigor2500We

Note : The RST file will clear out all existing router settings back to
factory
defaults. You must use the RST file if you are experience unusual
results after
upgrading with the ALL file.
Do not then attempt to restore old settings from a backup file made with
from previous firmware. After upgrading, please check that your web
configurator
shows the firmware version/build listed above.
multi-PVC support shall be referred to ISP services. You are recommended
not to
use this portion if your ISP did not support multi-PVC.
You are recommended to select "UBR" of QoS for internet Access if you
only use
one PVC to access internet.
[release]: the same firmware for annex A and B
1> "v2k5c257.xxx" is with Conexant modem code v3.27.
( recommended for annex A [POTS] )
2> "v2k5o257.xxx" is with Conexant modem code v3.20.
( recommended for annex B [ISDN],
Netherlands, Spain, and so on )
( or for annex A, China )
3> "v2k5a257.xxx" is with Conexant modem code v3.46.
( For Poland )
4> "v2k5u257.xxx" is with Conexant modem code v3.20.
( For Australia )
5> "v2k5v257.xxx" is with Conexant modem code v3.50.
( For Vietnam,
or Try this if you have sync
problem on adsl.)
6> "v2k5s257.xxx" is with Conexant modem code v3.20.
( For US )
Notes:
1. Please select modulation to "MULTI" or "T1.413" when
your adsl line was
annex B ( ADSL Over ISDN) and it only can work with
Alcatel ETSI Mode.
2. Please try to use modem code v3.20 if you meet sync
problem.
[1. Fixed problems]
1.1 Change MRU low to 1400 (Original 1492) to fit some ISP setting.
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
Recommended for AnnexA POTS with moem code 3.27
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-std327.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
Recommended for AnnexB ISDN, Netherlands, Spain, and AnnexA for China with modem code 3.20
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-std320.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
For Australia with modem code 3.20
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-au_320.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
For Poland with modem code 3.46
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-std346.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
For Vietnam, or Try this if you have sync problem on ADSL with modem code 3.50
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-std350.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
For US with modem code 3.20
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-us320.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
For Norway with modem code 3.38
Operating Systems
Firmware
Version Firmware
2.57
Size Firmware
2.6Mb
File Name
vigor2500-we-v2.57-nw_338.zip
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
User Guide for Firmware
Operating Systems
User Guide
Version Firmware
2.57
Size Firmware
8.8Mb
File Name
b64a988d7c501ca4b0075e821a35543020090226061613172934-users-guide.zip
Info
Introduction
The term Virtual TA means the local Ethernet-connected hosts or PCs use popular
CAPI-based software such as RVS-COM or BVRP etc. to access the router as a local
ISDN TA for FAX sending or receiving via the ISDN line. Basically, it is a client/server
network model. The Virtual TA server built into the router handles the connection establishment
and release. The Virtual TA client, installed in the Ethernet-connected host, creates
a CAPI-based driver to relay all CAPI messages between applications and the router
CAPI module.
Virtual TA
Note:
1. The Virtual TA client is only supported on MicrosoftTM Windows 95 OSR2.1/
98/98SE/Me/2000/XP platforms.
2. The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in
FAX engine.
3. One ISDN BRI interface only has two B channels.
The maximum number of active clients is also 2.
4. Before you set up the Virtual TA, you must set the correct country code.
Click ISDN Setup in the Basic Setup group.
As the following application chart shows, the Virtual TA client can make an outgoing call or
accept an incoming call to/from a peer FAX machine or ISDN TA etc.

Setup a Virtual TA
Note: supported on the VigorX and VigorW model only.
Quick Setup
> Virtual TA (Remote CAPI) Setup

Installing a Virtual TA Client
1. Insert the CD-ROM supplied with your Vigor router, or directly double-click the installer
file. Vsetup95.exe is for Windows 95 OSR2.1 or higher, Vsetup98.exe is for Windows 98,
98SE and Me, and Vsetup2k.exe is for Windows 2000/XP.
2. Follow on-screen instructions of the installer. The last step requires you to restart your
computer. Click OK to restart.
3. After the computer restarts, you will see a VT icon on the taskbar.

Configuring a Virtual TA Client/ Server
The Virtual TA application is a client/server model. You must set it up on both ends to
operate your Virtual TA application.
By default, the Virtual TA server is enabled and the username and password fields are
blank. Any Virtual TA client may login to the server. Once a single Username and Password
field has been filled, the Virtual TA server will only allow clients with a valid username
and password to login.
Company
Draytek
Categories
Fax & Modem & ISDN
Model
Draytek Vigor2500-We
Description
Quick User Guide for Firmware
Operating Systems
User Guide
Version Firmware
2.57
Size Firmware
3.7Mb
File Name
50bc83b88977fbb9d1a69c26a018c48b20090226061613617694-quick-start-guide.zip
Info
Vigor2500 Series Introduction
LED indicators and back panels ...............................................
Vigor2500 ............................................................................
Vigor2500We ........................................................................
Vigor2500Wt ........................................................................
Copyright declarations ...........................................................
Trademarks ..........................................................................
Safety instructions ................................................................
Warranty .............................................................................
European community .............................................................
Be a registered owner ...........................................................
Firmware & tools updates ......................................................
Vigor2500 Series Quick Start Guide
Aim of this chapter ................................................................
Delivery check ......................................................................
Identify your variant ..............................................................
What you need from ISP ........................................................
What you need in your side ....................................................
You must wire ......................................................................
Install Router Tools ...............................................................
Turn on your router ................................................................
Connect to router ..................................................................
Password .............................................................................
Enter router menu .................................................................
Get DSL parameters ..............................................................
For PPPoE/PPPoA users ..........................................................
For MPoA (RFC1483/2684) users ..............................................
Auto detect ATM/DSL Setting ..................................................
Surfing Internet ....................................................................
Wireless LAN Setting .............................................................
Wireless LAN Interface ..........................................................
WEP Security of Wireless LAN Interface ....................................
Access Control of Wireless LAN Interface ..................................
Trouble Shooting for [Cannot get on to the Internet]
Check if the hardware is OK? ..................................................
Can you ping the router from your PC? .....................................
For Windows ........................................................................
For Mac (Terminal) .................................................................
For Win98/Me user ................................................................
For Win2000 user ..................................................................
For WinXP user .....................................................................
For Mac OS 9 user .................................................................
For Mac OS X user .................................................................
Are DSL/ISP settings OK? .......................................................
Check DSL status ..................................................................
Report to people who concerned if still can not work ..................
HelpDrivers Since March 2000