Digicom Palladio Lan Download Drivers

Available 1 files for Palladio Lan
Company
Digicom
Categories
Fax & Modem & ISDN
Model
Digicom Palladio Lan
Description
Drivers
Operating Systems
Windows 3.x-95-98-98Se-Me-NT-2000-XP
Version Driver
2.01
Size Driver
595Kb
File Name
pallan__win_v202.zip
Info
Driver Diskette Ver 1.3
for 10/100 Base FastEthernet PC Card
Oct 2001
TOPIC
=================================================
[1]. Diskette Contents
[2]. Installation for DOS ODI Driver
[3]. Installation for DOS Packet Driver
[4]. Installation for Microsoft Windows 95/98/98_ME/2000/XP
[5]. Installation for Microsoft Windows NT 3.51
[6]. Installation for Microsoft Windows NT 4.0
[7]. Copyrights, Trademarks, and Disclaimers
[1] Diskette Contents

Files Contents
------------------------------------------------------------------
\README.TXT This File
\ENABLER DOS PCMCIA Enable Program
\ODI Novell Netware DOS ODI Driver
\PKTDRV FTP Compliant Packet Driver
\WIN95 NDIS Driver for Windows 95
\WIN98 NDIS Driver for Windows 98
\WIN98_ME NDIS Driver for Windows 98_ME
\WIN2000 NDIS Driver for Windows 2000
\WINXP NDIS Driver for Windows XP
\WNT351 NDIS Driver for Windows NT 3.51
\WNT40 NDIS Driver for Windows NT 4.0
\linux How to install linux driver
\Manual\Manual.HTM Manual Document
[2]. Installation for DOS ODI Driver

1. For those who installed EMM386.EXE in your config.sys, please exclude
memory address D400-D7FF from your system. PCMCIA Ethernet card enabler
program will use this space to read Ethernet ID and CIS from on-board
flash memory.
[Example]
DEVICE=EMM386.EXE NOEMS X=D400-D7FF
or
DEVICE=EMM386.EXE NOEMS X=D000-DFFF

2. User need to add "LASTDRIVE=[Device Name]" in the Config.sys file,
then reboot Notebook. Example, if you want to login to Device "N",
the string is "LASTDRIVE=M".

3. Enable the FastEthernet PC Card
The EN100.EXE is a PCMCIA controller enabling program. This enable
program only need for DOS and Windows 3.1 system. You don't need
installed the Socket and Card service in your Notebook before
executing the enabler.
In DOS command, go to "\ODI", then type "EN100 [/IRQ:x][/IOP:xxx]"
* IRQ - system interrupt number required for the FastEthernet card.
* IOP - card's I/O port address assignment in HEX format.
The default syntax is "EN100 /IRQ:5 /IOP:300".

4. Getting Started the Novell DOS ODI Driver:
This directory "\ODI" contains FastEthernet DOS ODI driver.
You need the following files to install DOS ODI DRIVER.
a. LSL.COM: supplied by Novell
b. LNAX100.COM: DOS ODI driver, supplied by card manufacturer
c. IPXODI.COM: supplied by Novell
d. NETX.EXE: supplied by Novell
e. NET.CFG: optional configuration file
HelpDrivers Since March 2000