Diamond SupraExpress Memory Download Drivers and Firmware

Available 2 files for SupraExpress Memory
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress Memory
Description
Drivers
Operating Systems
Windows 2000
Size Driver
40Kb
File Name
2000.zip
Info
Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730

Instructions for new installation of drivers:

1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.

Testing the Installation:

1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress Memory
Description
Firmware
Operating Systems
Windows 95-98-NT4-firmware
Version Firmware
052099
Size Firmware
342Kb
File Name
firmware-95-98-nt4-052099.zip
Info
SupraExpress 56e Memory SUP2650 Series Windows 9x/NT firmware update.
======================================================================
Applicable files
-----------------

V.90:
supraexpress-memory_52099b-firmware.exe

Release Notes
-----------------
These firmware updates are provided for those who are experiencing difficulty with
their modem's current firmware. Unless you are experiencing connection or operation
difficulties with the modem, there should be no need to upgrade your firmware.
Firmware updates are created to deal with specific issues that may arise with
previous versions. In some cases, a firmware update may negatively affect the
situation. And for some modems there are no "flash-backs" to the previous firmware
versions to correct this.

Connection rates of 42K and above are common 56K connections for most phone lines.
If your modem is operating properly, but only connecting at these connection ranges,
Diamond/S3 would not recommend updating the firmware. This is because it is not likely
that a firmware/driver update will improve these connection speeds.

Before considering updating the firmware/drivers, you may want to first try the
following:

1) Try various initialization strings suggested on our web site, www.s3.com.
2) Try dialing into another number. The situation may only be present when dialing
into a specific number's equipment.
3) Test the line quality with the AT&V1 command.

If the situation persists after trying the above, then it may be beneficial to
update the modem's firmware.

It is recommeded that you use the 52099b version of the firmware unless specifically
instructed otherwise by Diamond/S3 technical support.

Fixes since rev. s1.00-102998:

- improved PCM connectivity, especially against freeserve UK
- call forwarding working

Installation Instructions
-----------------

You should print this document for easy reference.

1. Download the file onto your hard drive or a floppy disk. In your browser, click on
the file name. Your browser should prompt as to where you would like to save the file.
You should note the location (i.e. c:\windows\temp, a:\, etc).

2. When the download is complete, you should disconnect from the internet and close
all open programs.

3. You should then need to run the files from the downloaded file. Click
Start\Run\Browse. Locate the downloaded file. It should be in the noted location from
step 1 above. Click OK and then OK again.

4. A Self-Extractor window labeled Diamond Multimedia should appear. Click OK install the product.

5. Flash loader4.4 will be started choose modem.hex as file to
download (simply click OK)
HelpDrivers Since March 2000