Diamond SupraExpress 56i Pro II Download Drivers

Available 2 files for SupraExpress 56i Pro II
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress 56i Pro II
Description
Drivers
Operating Systems
Windows 2000
Size Driver
344Kb
File Name
2000.zip
Info
Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730

Instructions for new installation of drivers:

1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.

Testing the Installation:

1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress 56i Pro II
Description
Drivers
Operating Systems
Windows 95-98-NT4
Size Driver
1012Kb
File Name
95-98-nt4.zip
Info
How to use this Archive --
-- Updated 6/26/97 by KGR
-- Updated 3/24/98 by KFM

This Archive includes:
this Readme.txt

INF files for Diamond Modem Products

mdmsupr5.inf (Win95/WinNT4.0 INF for non-voice modems)
mdmsupv9.inf (Win95/WinNT4.0 INF for 33.6k voice modems)
sup_wav9.inf (Win95/WinNT4.0 INF to load serial wave driver
for voice modems)
mdmsup56.inf (Win95/WinNT4.0 INF for 56k modems)
mdmV90.inf (Win95/WinNT4.0 INF for 56k V.90 modems)
supwav56.inf (Win95/WinNT4.0 INF for 56k voice modems to load
serial wave driver for voice modems)
supV90wv.inf (Win95/WinNT4.0 INF for 56k V.90 voice modems to load
serial wave driver for voice modems)
pccard56.inf (Win95/WinNT4.0 INF for 56k PC Card modems with 1.0 Firmware)

VoiceView files for Win95 (Microsoft version 950)

filexfer.exe
filexfer.cnt
filexfer.hlp
fte.dll
vtdi.386
vvexe32.exe
wsock.vxd
wsock32.dll
wsvv.vxd

Utility for Removing Current SupraModem INF files
ksip.exe

THESE FILES SHOULD NOT BE POSTED ON ANY ONLINE SERVICE OUTSIDE OF THIS ARCHIVE
WITHOUT DIRECT PERMISSION FROM DIAMOND MULTIMEDIA SYSTEMS

Overview:

These files are used to properly install Diamond/Supra modems so they can be
used with TAPI 2.0 aware applications. TAPI 2.0 is available in Win95 and
WinNT 4.0. There is also support for the UnimodemV add-on, which is available
from Microsoft as a upgrade for TAPI 2.0. At this time UnimodemV is only
available for Win95.

UnimodemV can be downloaded from:

http://www.microsoft.com/windows/software/drivers/unimodem.htm

The 2.0 release of TAPI provides a standard interface for software developers
to interact with modems for setting up, making and receiving data calls. This
is done through the Unimodem interface.

UnimodemV enhances the original release of Unimodem by adding voice
functionality. The added voice functionality includes recording and playing
wave files to the phone line, caller id, distinctive ring and speaker phone
control abilities. The one caveat with UnimodemV is the voice functionality
must already exist in the modem. It only provides a standard interface for
functions that are already there.

Some of the programs that use TAPI/Unimodem are:

1. Win95 Dial-up Networking
2. WinNT 4.0 RAS
3. HyperTerminal
4. Qmodem Pro for Win95 v2.0
5. Microsoft Phone
6. Winfax 7.0
HelpDrivers Since March 2000