Diamond SupRamax 56i Voice Monopak Download Drivers

Available 3 files for SupRamax 56i Voice Monopak
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupRamax 56i Voice Monopak
Description
Drivers
Operating Systems
Windows 2000
Size Driver
332Kb
File Name
2000.zip
Info
Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730

Instructions for new installation of drivers:

1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.

Testing the Installation:

1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupRamax 56i Voice Monopak
Description
Drivers
Operating Systems
Windows 95-98-98se-Me
Version Driver
V2.1.2.156.009
Size Driver
697Kb
File Name
95-98-98se-me-v2.1.2.156.009.zip
Info
SupraMax 56 PCI Monopak Series Windows 9x driver files
============================================
Applicable files
-----------------
Drivers V2.1.2.156.009:

supramax_56i_voice_monopak-9x_2750_156_9-driver.exe

Release Notes
-----------------

These drivers are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was
available. If your modem is working correctly with your system, there is
no reason to install new driver files.

Installation Instructions
-----------------
You should print this document for easy reference.

There are three possible paths for installing these files on your computer.
The first path is for those who have not installed any drivers for thier
modem. The second is for those who wish to update currently installed drivers.
And the third is for those wishing to do a complete driver reinstallation.

Installation Process 1:
-----------------
For those who have installed no drivers:

1. Label a blank formatted floppy disk, "SupraMax 56 PCI Monopak Driver files."

2. Insert the disk into the floppy drive.

3. Download the file onto a floppy disk. In your browser, click on the
file name, supramax_56i_voice_monopak-9x_2750_156_9-driver.exe. Your browser
should prompt as to where you would like save the file. You should select the
floppy drive, "a:\" (without the quotes).

4. When the download is complete, you should disconnect from the internet and
close all open programs.

5. You should then need to extract the files from the downloaded file. Click
Start\Run\Browse. Locate the supramax_56i_voice_monopak-9x_2750_156_9-driver.exe
file on the floppy drive, "a:." Click OK and then OK again.

6. A Self-Extractor window should appear. "C:\WINDOWS\TEMP" should appear in the
Unzip To Folder window. This is the default location. You should accept this
location as the complete set of drivers will not fit on a single floppy disk.
Click on the Unzip button.

7. After the files have been extracted click OK to the "success" window and then
Close to exit the extractor program.

At this point the files have been extracted and are ready for use to install. You
should be able to install your modem in the manner described in the installation
guide that accompanied the modem. When prompted for a driver disk, direct Windows
to the location of the extracted files (from step 6 above, c:\windows\temp). When
completed, you can verify the installation of the drivers by following the instructions
in the Driver Verification section below.

Installation Process 2:
-----------------
For those updating currently installed driver files:

1. Download the file onto your hard disk or floppy disk. In your browser, click
on the file name, supramax_56i_voice_monopak-9x_2750_156_9-driver.exe. Your browser
should prompt as to where you would like save the file. You should note the location
(i.e. c:\windows\temp, a:\, etc).
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupRamax 56i Voice Monopak
Description
Drivers
Operating Systems
Windows NT
Version Driver
V2.1.2.156.015e
Size Driver
550Kb
File Name
nt.zip
Info
SupraMax 56 PCI Series Windows NT driver files
=========================
Applicable files
-----------------

Drivers V2.1.2.136b (for SUP2260 modems):

supramax_56i_pci-nt_2260_136b-driver.exe

Drivers V2.1.2.136.001 (for SUP2370 modems):

supramax_56i_pci-nt_2370_1361-driver.exe

Drivers V2.1.2.154 (for SUP2350 modems):

supramax_56i_pci-nt_2260_136b-driver.exe

Drivers V2.1.2.156 (for SUP2750 modems):

supramax_56i_voice_monopack-nt_2750_156_9-driver.exe

It is highly recommended that you specifically identify your modem in order to
determine the appropriate drivers as each is specific to its model. You can use the
following chart to determine which modem you have based on its part number:

Model Part Number
---------------------
SUP2260: 23540020-003
SUP2370: 23540012-001
SUP2350: 23643012-002
SUP2750: 23680001-001

In most cases, you can ignore the last three digits of the part number as they represent minor board
revisions.

Release Notes
-----------------
These drivers are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was available.
If your modem is working correctly with your system, there is no reason to
install new driver files.

Installation Instructions
-----------------
You should print this document for easy reference.

1. Download the file onto your hard disk or floppy disk. In your browser, click on the
appropriate file name. Your browser should prompt as to where you would like
save the file. You should note the location (i.e. c:\windows\temp, a:\, etc).

2. When the download is complete, you should disconnect from the internet and close all open
programs.

3. You should then need to extract the files from the downloaded file. Click Start\Run\Browse.
Locate the appropriate file. It should be in the noted location from step 1 above.
Click OK and then OK again. Click OK to the initial extractor window.

4. A Self-Extractor window should appear. "C:\TEMP" should appear in the Unzip To
Folder window. This is the default location. If you want to change this, enter the appropriate
location. For most purposes it should not be necessary to change this. Uncheck the box to Run Setup.
Click on the Unzip button.

5. After the files have been extracted click OK to the "success" window and then Close to exit
the extractor program. At this point the files have been extracted and you should be able to install the modem.

WARNING: Do NOT attempt to manually add this modem. This is a software modem and requires that you run
the appropriate setup file in order to install. Attempting to manually add the modem may result in the need to reinstall the operating system.

NOTE: You must ensure that you are logged in as Adminstrator only. It is not sufficient
to be logged in with adminstrative priveledges.
HelpDrivers Since March 2000