D-Link DSL-504T Download Manual and Firmware

Available 6 files for DSL-504T
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch GPL Source Code
Operating Systems
Firmware
Size Firmware
35.1Mb
File Name
dsl-504t_gpl.tgz
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch Firmware
Operating Systems
Firmware
Version Firmware
100B02T02UK
Size Firmware
1.8Mb
File Name
dsl-504t_fw_v1.00b02t02.uk.20040610.zip
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch Firmware Update guide
Operating Systems
Manual
Size Firmware
219Kb
File Name
dsl-504t_firmwareupdate.pdf
Info
How to Firmware update
DSL-504T F/W-V1.00B02T02.UK.20040427
Please Unplug your ADSL cable from the router before upgrading the firmware.
Login into the unit using the Default Username and password of admin and admin respectively
Click On Login
The below screen will be displayed.
Then select Update gateway. And you will get the below screen
Click on browse under the update gateway firmware.
In the folder where the zip file is expanded you will get option for 2 files
1) Fs file
2) Kernel File
Select The FS file then click on update gateway. It will start copying the files across.
Once the file has gone through and the unit has rebooted login again
You now need to send the kernel file through
Once the upgrade has finished the unit will reboot.
Once the unit has been rebooted and you are logged in go to Tools and update gateway.
The current firmware version should now show the new version of the firmware.
The router will need to be factory reset before use.
Then go to tools and system
commands and perform a
restore.
Then you can configure the router as per your requirements. Once everything is configured
plug in the adsl line.
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch Installation Guide
Operating Systems
Manual
Size Manual
4Mb
File Name
dsl-504t_install_guides.pdf
Info
DSL-504T Install Guides
DSL-504T Internet connection with NAT......................................2
DSL-504T Internet connection with No NAT .................................7
DSL-504T Port Forwarding.......................................................14
DSL-504T Filtering and Firewall................................................26
Access Control ....................................................................27
DMZ setup..........................................................................34
Allow Incoming Ping.............................................................35
DSL-504T Factory reset. .........................................................36
To perform the reset through the web management go to ........36
Setting unit to factory defaults by using the reset button..........39
How to Firmware update .........................................................40
DSL-504T Internet connection with NAT
DSL-504T F/W-V1.00B02T02.UK.20040427
The default IP address for the router is 192.168.1.1
Open up Internet explorer and enter the IP address of the router.
You will be displayed with the below screen.
The default USERNAME is admin and the PASSWORD is admin.
Then click on Login.
You will then be displayed with the below screen
Then Select the Setup tab
The name can be anything you like. Select the type of connection
that you use from (PPPoE, PPPoA, Static, DHCP, Bridge, CLIP). As
most ISPís in the UK are currently using PPPoA this document will
concentrate on PPPoA configuration.
Tick the NAT and FIREWALL checkboxes
PPP Settings
Set encapsulation to VC
Enter your Username and Password
You do not need to change the Keep Alive and MAX Fail values from
the default.
You may need to change the MRU/MTU depending on what the ISP
can support. Please refer to you ISP for this value.
Select the set route option
PVC settings
VPI 0
VCI 38
Click on apply.
Then go to the Status tab.
Page 5
Then click on Connection status.
Under the Wan section it will show you your connection information.
Your configuration is now complete and you should be able to
browse the web.
Then click on tools and system commands, you will get the below
screen.
Click on Save all, so that the configuration is saved on the unit.
Then click back and restart. If you ever need to power off the unit
then the configuration will come back. If you do not save the
settings when the unit is powered of the settings will be lost.

DSL-504T Internet connection with No NAT
DSL-504T F/W-V1.00B02T02.UK.20040427
The default IP address for the router is 192.168.1.1
Open up Internet explorer and enter the IP address of the router.
You will be displayed with the below screen.
The default USERNAME is admin and the PASSWORD is admin.
Then click on Login.
You will then be displayed with the below screen
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch Datasheet
Operating Systems
Manual
Size Manual
251Kb
File Name
dsl-504t.pdf
Info
ADSL Router for Home/SOHO
With Built-in 4-Port Switch
The DSL-504T is an ADSL Router designed for the small office and home. This router lets you quickly and easily connect to highspeed
broadband Internet and share your ADSL line. With a built-in ADSL interface, 4 10/100BASE-TX Ethernet switch ports and
advanced router functions, this device gives your business and home a convenient and cost-effective way to install a secure, fast
network with bottleneck-free link to the outside world.
Simplified Broadband Internet Connection
Built-in ADSL Interface and Ethernet Switch Ports
Network Security
With this router, you can easily connect to your ADSL
broadband line for Internet access in your office or at home.
This device automatically creates an IP number and assigns
for each user, simplifying everyone's logon operation.
A standard-based ADSL modem in built into this router,
making connection to the Internet a breeze. The router also
incorporates four 10/100Mbps Ethernet switch ports,
providing ready connection for workstations and servers,
while saving you the cost and trouble of installing a separate
Ethernet switch.
The router provides NAT protection for your office and
home users from any Internet intruders and hackers, plus
VPN pass-through for extra security. It also blocks and
redirects certain ports to limit the services that outside users
can access your network. Virtual server mapping is used to retask
services to multiple servers. This router can be set to
allow separate FTP, Web, and Multiplayer game severs to
share the same Internet-visible IP address while still
protecting your servers and workstations from hackers.
The router supports constricted DMZ to redirect unknown
packets to a dedicated server/PC behind the router, enabling a
client (such as a Web server) to fully expose it to the Internet
and ensure complete Internet application compatibility. This
allows you to set up web sites and e-commerce business from
your office while maintaining protection for the rest of your
office LAN.
Company
D-Link
Categories
Fax & Modem & ISDN
Model
D-Link DSL-504T
Description
ADSL Router with built in 4-Port Switch GNU - General Public License
Operating Systems
Manual
Size Manual
41Kb
File Name
gnu_general_public_license.pdf
HelpDrivers Since March 2000