Creatix V90 PCMCIA Download Drivers and Manual

Available 7 files for V90 PCMCIA
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Important information for V90 PCMCIA
Operating Systems
Manual PDF
Size Manual
30Kb
File Name
importantinformationpcmcia.pdf
Info
important information for V90 PCMCIA
1. V ista 32 & 64 bit:
There are no drivers for this device and Vista available and they will not be
developped.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Manual for V90 PCMCIA
Operating Systems
Manual PDF
Size Manual
10Kb
File Name
pcmciav90_gb.pdf
Info
56 K FAX MODEM
Quick Start Manual
Installation of the Fax Modem Card:
Plug in the modem card Type II or Type III into the PCMCIA Slot. If you have problems to find this slot,
have a look at your computer’s user manual or consult the manufacturer of your computer. Plug in the
PCMCIA-Card carefully into the slot. Make sure that the card is firmly seated in the slot and you are
ready to setup and install your communication software.
Setup for DOS/Windows 3.x:
Before you can use your new modem, your computer must have the proper modem software drivers
installed to access the modem. Your computer should have the Card and Socket Services drivers preinstalled.
The Card and Socket Services driver software allows your computer to access the PCMCIA
slots. If these are not already in your system, or if you do not know if they are installed, check your
system manual or consult the manufacturer of your computer. The most popular and common Card
and Socket Services are Systemsoft® CardWizardTM, Phoenix’s® PCMTM and AMI Card Manager Pro
3.0.
If Card and Socket Services drivers are already installed in your computer, you should be able to
simply plug in your fax modem card and begin installing and using the software. Please be sure that
the COM port for modem cards which is assigned by the Card and Socket Services is the same as the
setting of your communication software in your computer.
Setup for Windows 95:
Windows 95 comes with most of the drivers necessary to access your fax modem. Just follow these
steps to get up and running:
1. Switch of your PC.
2. Insert the fax modem card into a free PC Card slot in your PC, making sure that the card is
securely inserted into the slot.
3. Start your PC again.
4. Windows will display the “New Hardware Found” dialog box. Select the “Driver from disk
provided by hardware manufacturer” and click “OK”. If you do not see the above selection,
simply click “Next” to continue. (For Windows 95 Release 2.0 user: Insert the driver disk into drive
A: and click “Finish” to complete the installation process).
5. Make sure that the directory is A:\ in the drive window. Click “OK” to continue. The modem is now
ready for use.
Setup for Windows 98:
Windows 98 comes with most of the drivers necessary to access your fax modem. Just follow these
steps to get up and running:
1. Switch of your PC.
2. Insert the fax modem card into a free PC Card slot in your PC, making sure that the card is
securely inserted into the slot.
3. Start your PC again.
4. Windows will display the “New Hardware Found“ dialog box. Select the “Driver from disk
provided by hardware manufacturer” and click “OK“. If you do not see the above selection,
simply click “Next“ to continue.
5. Make sure that the directory is A:\ in the drive window. Click “OK” to continue. The modem is now
ready for use.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Installation instruction under
Operating Systems
Manual PDF for Windows 2000
Size Manual
57Kb
File Name
inst-pcmcia-w2k_gb.pdf
Info
Installation PCMCIA V.90 under Windows 2000
a. Plug in the card into the PCMCIA-Slot (TYP II or TYP III). If you have problems to find the right slot,
have a look at the manual of your PC or ask the manufacturer respectively your PC-dealer.
Make sure that the card is plugged in tough.
b. Connect the card with the delivered phone cable (possibly with adapter) with the N-Slot at the wall
socket of the phone-line.
c. Start your PC.
d. The modem will be installed, without a message, as a standard PCMCIA CARD Modem. You can
verify this under “start – settings – control panel – telephone and modemoption”.
e. Now go to “start – settings – control panel – system” and click the register card Hardware and there
device manager. Under modem, you will find the PCMCIA Card. Make a double click to open the
file and have a look at the properties.
f. Change the register card to driver and push the button “update driver”. The assistant for the device
updates will be started. Confirm with “Next”.
g. “This assistant will update the driver for the following device: Standard PCMCIA Card. What do you
want to do?” Choose the option “Search the best driver for the device” and push the button “Next”.
h. Insert the disc with the label “Driver disc” into your CD-ROM, activate the window “Search other
sources” and go further with “Next”.
i. The following message appears: “Found another driver for this device: a:\fmcv11n.inf”. Push the
button “Next”.
j. The driver has no digital signature – continue the installation with “Yes”.
k. “The software for this device has been installed: PCMCIA V.90 Fax Modem Card.” Confirm with
“Finish”.
l. Leave the device manager and the control panel.
Installation of the modem utilities (necessary to change the country settings):
Put in the disc with the label “World Traveler Modem Setup Utility” and start the setup.exe. Now the
utilities will be installed and you can use them under start – program – World Travel.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Installation instruction under
Operating Systems
Manual PDF for Windows 98
Size Manual
57Kb
File Name
inst-pcmcia-w98_gb.pdf
Info
Installation PCMCIA V.90 under Windows 98
a. Plug in the card into the PCMCIA-Slot (TYP II or TYP III). If you have problems to find the right slot,
have a look at the manual of your PC or ask the manufacturer respectively your PC-dealer.
Make sure that the card is plugged in tough.
b. Connect the card with the delivered phone cable (possibly with adapter) with the N-Slot at the wall
socket of the phone-line.
c. Start your PC.
d. The PC signalizes “New Hardware found – PCMCIA Card Service” and installs that one. This
message only appears if there has been no PCMCIA Card Service installed.
e. After this the PC signalize “New Hardware found” and starts the hardware assistant.
f. The message appears “This assistant search for new drivers for the standard PCMCIA-Card-
Modem.” Confirm the message with “Next”.
g. “What do you want to do?” Choose the option “Search the best driver for the device automatically
(recommended)”, put in the disc with the label “driver disc” and click the button “Next”.
h. Now choose “disc” and go further with “Next”.
i. “The driver file for the following device is been searching: “PCMCIA V.90 Fax Modem Card””. The
position of the driver is: a:\fmcv11n.inf”. Push the button “Next”.
j. “PCMCIA V.90 Fax Modem Card”. “The software for this device has been installed. Confirm with
“Finish”.
k. “To finish the installation of the hardware, you have to reboot your PC. Should your PC rebooted
now?“ Confirm with “Yes”. (Remove the disc from the floppy).
Installation of the modem utilities (necessary to change the country settings):
Put in the disc with the label “World Traveler Modem Setup Utility” and start the setup.exe. Now the
utilities will be installed and you can use them under start – program – World Travel.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Installation instruction under
Operating Systems
Manual PDF for Windows Me
Size Manual
57Kb
File Name
inst-pcmcia-wme_gb.pdf
Info
Installation PCMCIA V.90 under Windows ME
a. Plug in the card into the PCMCIA-Slot (TYP II or TYP III). If you have problems to find the right slot,
have a look at the manual of your PC or ask the manufacturer respectively your PC-dealer.
Make sure that the card is plugged in tough.
b. Connect the card with the delivered phone cable (possibly with adapter) with the N-Slot at the wall
socket of the phone-line.
c. Start your PC.
d. The PC reports “Update Data bank for Hardware service” and afterwards “New Hardware found –
PCMCIA Card Service”. In the following the PC will be rebooted. This message only appears if
there has been no PCMCIA Card Service installed.
e. After this the PC signalize “New Hardware found – PCMCIA Wold-wide Modem – FM56C-NCTS”
and starts the hardware assistant.
f. Put in the disc with the label “Driver Disc” and choose the option “Search the best driver for the
device automatically (recommended)”, and click the button “Next”.
g. The position of the driver is: a:\fmcv11n.inf”. Push the button “Next”.
h. The new Hardware component has been installed “PCMCIA V.90 Fax Modem Card”. Go ahead
with “Finish”.
The installation of the PCMCIA Card driver is finished and Windows ME starts automatically.
Installation of the modem utilities (necessary to change the country settings):
Put in the disc with the label “World Traveler Modem Setup Utility” and start the setup.exe. Now the
utilities will be installed and you can use them under start – program – World Travel.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Installation instruction under
Operating Systems
Manual PDF for Windows NT4
Size Manual
58Kb
File Name
inst-pcmcia-wnt_gb.pdf
Info
Installation PCMCIA V.90 under Windows NT4.0
a. Plug in the card into the PCMCIA-Slot (TYP II or TYP III). If you have problems to find the right slot,
have a look at the manual of your PC or ask the manufacturer respectively your PC-dealer.
Make sure that the card is plugged in tough.
b. Connect the card with the delivered phone cable (possibly with adapter) with the N-Slot at the wall
socket of the phone-line.
c. Start your PC.
d. Go to “start – settings – control panel – PCMCIA” and verify if the PCMCIA Card has been
recognized and at which com port she is lying (properties). Close the window.
e. Afterwards go to “start – settings – control panel – modem” and push the button “Add”.
f. Activate the option “Choose modem (no automatic identification)” and go ahead with “Next”.
g. In the following window of the manufacturer and modemtypes push the button “Disc”.
h. Put in the disc with the label “Driver disc” and push the button “ok” in the window “copy
manufacturer file” if drive A:\ is chosen.
i. Choose in the following window the model “PCMCIA V.90 FAX MODEM CARD” and click the
button “Next”.
j. Answer the question “At which ports do you want to install?”, with the com port the card is lying
(see paragraph d) and push the button “Next”.
k. If there was no modem used, the system is asking several details for the location.
l. At the end, the message “Now the modem is configured” appears. Confirm this message with
“Finish”.
Note:
a. According to the BIOS: Pay attention, that in the BIOS of your PC the operating system is prepared
to “Other” (if NT is not listed). If it’s prepared for another operating system, the card will not work.
b. For using the DFÜ-Network, the RAS service must be installed and the modem added as well.
Installation of the modem utilities (necessary to change the country settings):
Put in the disc with the label “World Traveler Modem Setup Utility” and start the setup.exe. Now the
utilities will be installed and you can use them under start – program – World Travel.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix V90 PCMCIA
Description
Driver
Operating Systems
Windows 98-Me-NT4
Size Driver
13Kb
File Name
fmcv11n.inf
HelpDrivers Since March 2000