Creatix ISDN S0 Box Download Drivers and Manual

Available 2 files for ISDN S0 Box
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix ISDN S0 Box
Description
Installation instruction under
Operating Systems
Manual PDF for Windows 95-98
Size Manual
39Kb
File Name
boxinst_gb.pdf
Info
Installation of the Creatix ISDN S0-BOX under Windows 95 and 98
Prerequisite:
1. Download the driver box95ger.exe for Windows 95 and box98ger.exe for Windows 98 from our Online
Service.
2. Implement the file so, that the driver will be extract (unzip the file):
Under Windows 95 in the directory < \ISDN.W95 > and under Windows 98 in the directory < \ISDN > or
in your own directory.
3. Before you install the driver, make sure, that the Dial-Up Networking, the Dial-Up Adapter and the
TCP/IP Protocol are installed.
Make the following steps: < Start – Settings – Control Panel – Add/Remove Programs – Windows setup
– Communications >. Go to < Details > and activate, if necessary, the Dial-Up Network.
The Dial-Up Adapter and the TCP/IP-Protocol has to be under < Start – Settings – Control Panel –
Network >. Add these components, if they are not there (choose Microsoft as manufacturer).
4. Under Windows 98 the Microsoft Accelerator Pack-Installation is not allowed. With the following steps
you can go to the Windows-Setup: < Start – Settings – Control Panel – Add/Remove Programs >. If
Microsoft Accelerator Pack exists, de-install this ISDN-Driver and make an new installation of your Dial-
Up Network.
5. Existing drivers for the parallel S0-Box have to be de-installed. Execute the program delcapi.exe from
the driver directory (\ISDN.W95 respectively \ISDN or the name you have chosen ). Have a look at the
Device Manager under < Control Panel – System > if the S0-Box exists under “Other components” or as
a “Network Card”, delete this item. Don’t reboot your PC before executing point six.
6. Note the holding (IRQ and E/A-area) of the printer connection from < Start – Settings – Control Panel –
System – Device Manager > under Connection (COM and LPT) – printer port (LPT)-resources.
7. Reboot your PC.
8. Switch of your PC and connect the parallel S0-Box with the parallel Interface of the PC. Connect the S0-
Box with the delivered power supply (230 mA, 8-9 V AC) and the ISDN cable. Start the PC again.
Company
Creatix
Categories
Fax & Modem & ISDN
Model
Creatix ISDN S0 Box
Description
De-installation program
Operating Systems
Program
Size Driver
136Kb
File Name
delcapi.exe
HelpDrivers Since March 2000