Conexant HSF 56k Download Drivers

Available 7 files for HSF 56k
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI
Operating Systems
Windows 2000
Size Driver
1.4Mb
File Name
hsfp_win2k.zip
Info
This document describes the steps required to properly install the Windows 2000 Conexant soft modem (HSF) Generic Drivers, which accompany this document. Please understand that the Conexant modem drivers you will be installing are intended for basic modem operations and are generally not supported.
Conexant Systems, Inc. 04/15/2004


****************************************************************************
Table of Contents

I. Extract the generic modem driver.

II. Instructions for Windows 2000.
i. Uninstall and install the Conexant modem drivers with HXFSetup.exe.

III. Testing your modem.

****************************************************************************

I. Extracting the generic modem driver.

1. Download the Win2K Conexant soft modem (HSF) Generic Driver from the website (www.conexant.com).
2. Double click on the self-extracting executable file to extract the files to your local drive (C:\).

**Note: It is recommended that you take note of the exact location of the extracted files, as you will be required to use this information during the installation process.
On how to download the Conexant modem drivers please read the document "Instructions on How to Download Generic Drivers".

****************************************************************************

II. Installation Instructions for Windows 2000.

i. Uninstall and install the Conexant modem drivers with HXFSetup.exe.

1. Go to the folder where the modem driver is located, C:\HSF_Win2K, and double click on the HXFSetup.exe file.
2. By clicking on the HXFSetup.exe, you will be uninstalling the current modem drivers, if installed, and installing the Conexant soft modem (HSF) generic modem driver downloaded from the Conexant website.
3. The add new hardware wizard will prompt you regarding the digital signature. Click on "Yes" when asked if you would like to continue the installation.
4. Click on Next, then select "Search for a suitable driver for my device (recommended)" and click Next.
5. To direct windows to the drivers click on "Specify Location" only and go to the folder where the drivers are located, C:\HSF_Win2K.
6 Open the GENHSF5.INF file and click OK.
7. Click Next on the next window and allow a few seconds for the installation process. Click "Yes" for any digital signature prompts (same as #3)
8. Click on Finish when ready and generic modem driver is installed.
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI DataFax
Operating Systems
Windows 2000
Size Driver
1.4Mb
File Name
hsfp_win2k.zip
Info
This document describes the steps required to properly install the Windows 2000 Conexant soft modem (HSF) Generic Drivers, which accompany this document. Please understand that the Conexant modem drivers you will be installing are intended for basic modem operations and are generally not supported.
Conexant Systems, Inc. 04/15/2004


****************************************************************************
Table of Contents

I. Extract the generic modem driver.

II. Instructions for Windows 2000.
i. Uninstall and install the Conexant modem drivers with HXFSetup.exe.

III. Testing your modem.

****************************************************************************

I. Extracting the generic modem driver.

1. Download the Win2K Conexant soft modem (HSF) Generic Driver from the website (www.conexant.com).
2. Double click on the self-extracting executable file to extract the files to your local drive (C:\).

**Note: It is recommended that you take note of the exact location of the extracted files, as you will be required to use this information during the installation process.
On how to download the Conexant modem drivers please read the document "Instructions on How to Download Generic Drivers".

****************************************************************************

II. Installation Instructions for Windows 2000.

i. Uninstall and install the Conexant modem drivers with HXFSetup.exe.

1. Go to the folder where the modem driver is located, C:\HSF_Win2K, and double click on the HXFSetup.exe file.
2. By clicking on the HXFSetup.exe, you will be uninstalling the current modem drivers, if installed, and installing the Conexant soft modem (HSF) generic modem driver downloaded from the Conexant website.
3. The add new hardware wizard will prompt you regarding the digital signature. Click on "Yes" when asked if you would like to continue the installation.
4. Click on Next, then select "Search for a suitable driver for my device (recommended)" and click Next.
5. To direct windows to the drivers click on "Specify Location" only and go to the folder where the drivers are located, C:\HSF_Win2K.
6 Open the GENHSF5.INF file and click OK.
7. Click Next on the next window and allow a few seconds for the installation process. Click "Yes" for any digital signature prompts (same as #3)
8. Click on Finish when ready and generic modem driver is installed.
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI DataFax
Operating Systems
Windows 95-98-98Se
Size Driver
1.5Mb
File Name
hsfp_win9x.zip
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI
Operating Systems
Windows 95-98-98Se
Size Driver
1.5Mb
File Name
hsfp_win9x.zip
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI
Operating Systems
Windows Me
Size Driver
1.4Mb
File Name
hsfp_winme.zip
Info
This document describes the steps required to properly install the Windows ME Generic Modem Driver, which accompany this document. Please understand that the modem drivers you will be installing are intended for basic modem operations and are generally not supported.
Conexant Systems, Inc. 03/15/2004


****************************************************************************
Table of Contents

I. Extract the generic modem driver.

II. Instructions for Windows ME.
i. Uninstall and install the generic modem drivers with HXFSetup.exe.

III. Testing your modem.

****************************************************************************

I. Extracting the generic modem driver.

1. Download the WinME HSF Generic Driver from the website (www.conexant.com).
2. To extract the driver double clicking on the HSF_WinME.exe file and pointed the your C:\ drive.

**Note: It is recommended that you take note of the exact location of the extracted files, as you will be required to use this information during the installation process.
On how to download the generic modem drivers please read the document "Instructions on How to Download Generic Drivers".

****************************************************************************

II. Instructions for Windows ME.

i. Uninstall and install the generic modem drivers with HXFSetup.exe.

1. Go to the folder where the modem driver is located, C:\HSF_WinME, and double click on the HXFSetup.exe file.
2. By clicking on the HXFSetup.exe, you will be uninstalling the current installed modem driver and installing the HSF generic modem driver that was downloaded from the Conexant website.
3. Allow a few seconds for the next step.
4. If during the installation process, the "Add New Hardware Wizard" pops up which indicates that you need to direct it to the drivers.
5. Click on Next, then select "Specify the location of the driver (Advanced)" and click Next.
6. To direct windows to the drivers select "Specify a location" and go the folder where the drivers are located, C:\HSF_WinME, and then click Next.
7. The next window will say "Windows driver file search for the device: PCI Modem Enumerator", click Next and then Finish.
8. Next pop up wimdow, "Windows has found the following new hardware: Modem Device", repeat step 5 and 6.
9. The next window will say ""Windows driver file search for the device: Generic SoftK56 Data Fax", click Next and then Finish.
10. Allow a few seconds for the installation process and then click on Finish when ready.
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI DataFax
Operating Systems
Windows Me
Size Driver
1.4Mb
File Name
hsfp_winme.zip
Info
This document describes the steps required to properly install the Windows ME Generic Modem Driver, which accompany this document. Please understand that the modem drivers you will be installing are intended for basic modem operations and are generally not supported.
Conexant Systems, Inc. 03/15/2004


****************************************************************************
Table of Contents

I. Extract the generic modem driver.

II. Instructions for Windows ME.
i. Uninstall and install the generic modem drivers with HXFSetup.exe.

III. Testing your modem.

****************************************************************************

I. Extracting the generic modem driver.

1. Download the WinME HSF Generic Driver from the website (www.conexant.com).
2. To extract the driver double clicking on the HSF_WinME.exe file and pointed the your C:\ drive.

**Note: It is recommended that you take note of the exact location of the extracted files, as you will be required to use this information during the installation process.
On how to download the generic modem drivers please read the document "Instructions on How to Download Generic Drivers".

****************************************************************************

II. Instructions for Windows ME.

i. Uninstall and install the generic modem drivers with HXFSetup.exe.

1. Go to the folder where the modem driver is located, C:\HSF_WinME, and double click on the HXFSetup.exe file.
2. By clicking on the HXFSetup.exe, you will be uninstalling the current installed modem driver and installing the HSF generic modem driver that was downloaded from the Conexant website.
3. Allow a few seconds for the next step.
4. If during the installation process, the "Add New Hardware Wizard" pops up which indicates that you need to direct it to the drivers.
5. Click on Next, then select "Specify the location of the driver (Advanced)" and click Next.
6. To direct windows to the drivers select "Specify a location" and go the folder where the drivers are located, C:\HSF_WinME, and then click Next.
7. The next window will say "Windows driver file search for the device: PCI Modem Enumerator", click Next and then Finish.
8. Next pop up wimdow, "Windows has found the following new hardware: Modem Device", repeat step 5 and 6.
9. The next window will say ""Windows driver file search for the device: Generic SoftK56 Data Fax", click Next and then Finish.
10. Allow a few seconds for the installation process and then click on Finish when ready.
Company
Conexant
Categories
Fax & Modem & ISDN
Model
Conexant HSF 56k
Description
PCI DataFax
Operating Systems
Windows XP
Size Driver
1.4Mb
File Name
hsfp_winxp.zip
Info
This document describes the steps required to properly install the Windows XP HSF Generic Drivers, which accompany this document. Please understand that the modem drivers you will be installing are intended for basic modem operations and are generally not supported.
Conexant Systems, Inc. 03/15/2004


****************************************************************************
Table of Contents

I. Extract the generic modem driver.

II. What is new in Windows XP?

III. Instructions for Windows XP.
i. Upgrading the modem driver with the generic modem drivers using HXFSetup.exe.

****************************************************************************

I. Extracting the generic modem driver.

1. Download the WinXP HSF Generic Driver from the website (www.conexant.com).
2. To extract the driver double clicking on the HSF_WinXP.exe file and pointed the your C:\ drive.

**Note: It is recommended that you take note of the exact location of the extracted files, as you will be required to use this information during the installation process.
On how to download the generic modem drivers please read the document "Instructions on How to Download Generic Drivers".

****************************************************************************

II. What is new in Windows XP?

In WinXP, when the system is booted up it automatically detects the modem and install the modem with in-build drivers when you upgrade your Operating System from Win9x, WinME or Win2K.
Allow about 30 seconds for the Windows XP to recognize what type of modem it is installed on the system. Once windows have finished installing the in-build drivers now you can proceed with the upgrade.
If your modem is not supported in Windows XP inbuild driver, then XP will ask for you to point windows to the drivers, which we recommend to Cancel. You need to contact the modem manufacturer for a WinXP suitable driver or you can use the WinXP driver that we provide for the HSF modem.

****************************************************************************

III. Instructions for Windows XP.

i. Upgrading the modem driver with the generic modem drivers using HXFSetup.exe.

1. Go to the folder where the modem driver is located, C:\HSF_WinXP, and double click on the HXFSetup.exe file.
2. By clicking on the HXFSetup.exe, you will be uninstalling in-build modem driver and installing the HSF generic modem driver that was downloaded from the Conexant website.
3. The Windows XP operating system will prompt you with a software installation alert. This dialog explains how the software you are attempting to install has not passed Windows Logo testing. To install drivers click on "Continue Anyway" when prompted.
4. If during the installation process, the "Found New Hardware Wizard" pops up which indicates that you need to direct it to the drivers.
5. Select "Install from a list or specific location (Advanced)" and then click Next.
6. Check on "Don't search. I will choose the driver to install." and click Next.
7. To direct windows to the drivers click on "Hard Disk" and go the folder where the drivers are located, C:\HSF_WinXP.
8. Open the GENHSF5.INF file and click OK.
9. Click Next on the next window and allow a few seconds for the installation process.
10. During the installation process Windows will prompt you again to ensure that you know that the software has not been tested for the Windows logo. Click on "Continue Anyway" to install the modem.
11. Click on Finish when ready and the generic modem driver is installed.
HelpDrivers Since March 2000