Comtrol RocketPort USB Modem Hub Download Drivers and Manual

Available 7 files for RocketPort USB Modem Hub
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Hardware Installation
Operating Systems
Manual PDF
Version Manual
B
Size Manual
98Kb
File Name
2000141b.pdf
Info
Contains hardware specifications and product information RocketPort USB Modem Hub
Hardware Documentation

Product Overview
The RocketPort USB Modem Hub (RPUSBMH)
connects to a Universal Serial Bus (USB) port on a
PC. It is Hayesฎ compatible and contains four RJ11
modem ports that can operate at speeds up to 56
Kbps.
RocketPort USB Modem Hub series supports the
following features:
• Four V.90/56K flex modem ports
• Two downstream USB ports
• “Plug-and-Play” and “Hot Plug” capability
• Analog fax to 14.4 Kbps
• Compatible with USB specification 1.0/1.1
• Individual hardware modem reset capability
• Windows 98 compatible
• Speaker
Note: See the AT Command Set and the Software
Installation document for more information.
The RocketPort USB Modem Hub uses an internally
generated 48 MHz controller specifically designed for
a USB port to operate four modem ports. This device
and its software enable the USB interface to be
transparent to the peripheral and requires no
firmware changes. This makes it possible for
modems to easily interface with a USB port.

Using the Speaker
The RocketPort USB Modem Hub includes a speaker
that enables you to listen to the call in progress and
helps you determine the state of the phone line and
the modem. You can control each modem by using
the AT commands. All the modems in this hub share
one speaker.
The following table lists some of the more commonly
used speaker-related AT commands.

Using the Downstream Ports
The modem hub includes two USB type A
downstream ports, so you can connect multiple
peripherals (including additional modem hubs) while
at the same time supporting your modem hub.
If you want to add more RocketPort USB Modem
hubs to this one, you can daisy-chain up to three
modem hubs. Each modem hub requires its own
power supply.
Building Cables
The modem ports use standard telephone-type
unshielded twisted-pair cables with RJ11 modular
connectors. You can purchase these anywhere
commercial telephone products are sold.
Use the following table for pinout information for the
RJ11 port connectors on the RocketPort USB Modem
Hub.
When building cables, use Category 3 (or better)
unshielded twisted-pair wiring.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
AT Command Set
Operating Systems
Manual PDF
Version Manual
A
Size Manual
562Kb
File Name
at_cmds-usbmh.pdf
Info
Contents
1. INTRODUCTION.............................................................................................................................................................. 1-1
1.1 OVERVIEW ........................................................................................................................................................... 1-1
1.1.1 Command Syntax...................................................................................................................................... 1-1
1.1.2 Command Descriptions............................................................................................................................. 1-1
1.1.3 Call Progress and Blacklisting Parameters ................................................................................................ 1-1
1.1.4 ConfigurACE II for Windows Utility Program.............................................................................................. 1-2
1.2 REFERENCE DOCUMENTATION........................................................................................................................ 1-2
2. SYNTAX AND PROCEDURES........................................................................................................................................ 2-1
2.1 Alphabet ................................................................................................................................................................ 2-1
2.2 DTE Commands Lines .......................................................................................................................................... 2-1
2.2.1 Command Line General Format................................................................................................................. 2-1
2.2.2 Command Line Editing.............................................................................................................................. 2-1
2.2.3 Command Line Echo................................................................................................................................. 2-1
2.2.4 Repeating a Command Line ...................................................................................................................... 2-2
2.2.5 Types of DTE Commands......................................................................................................................... 2-2
2.3 Basic Syntax Commands ...................................................................................................................................... 2-2
2.3.1 Basic Syntax Command Format................................................................................................................. 2-2
2.3.2 S-Parameters ............................................................................................................................................ 2-2
2.4 Extended Syntax Commands ................................................................................................................................ 2-3
2.4.1 Command Naming Rules ........................................................................................................................... 2-3
2.4.2 Values ....................................................................................................................................................... 2-3
2.4.2.1 Numeric Constants .................................................................................................................... 2-3
2.4.2.2 String Constants ........................................................................................................................ 2-3
2.4.2.3 Compound Values ..................................................................................................................... 2-4
2.4.3 Action Commands..................................................................................................................................... 2-4
2.4.3.1 Action Execution Command Syntax........................................................................................... 2-4
2.4.3.2 Action Test Command Syntax.................................................................................................... 2-4
2.4.4 Parameter Commands.............................................................................................................................. 2-4
2.4.4.1 Parameter Types........................................................................................................................ 2-4
2.4.4.2 Parameter Set Command Syntax .............................................................................................. 2-5
2.4.4.3 Parameter Read Command Syntax ........................................................................................... 2-5
2.4.4.4 Parameter Test Command Syntax............................................................................................. 2-5
2.4.5 Additional Syntax Rules ............................................................................................................................. 2-5
2.4.5.1 Concatenating Commands after Extended Syntax Commands................................................. 2-5
2.4.5.2 Concatenating Commands after Basic Format Commands....................................................... 2-5
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Software Installation
Operating Systems
Manual PDF for Windows 2000
Version Manual
A
Size Manual
225Kb
File Name
2000147.pdf
Info
RocketPort USB Serial Hub Driver
Installation with Windows 2000

How to Use this Document
You can use the interactive Table of Contents to locate the information you need.
Note: All blue underlined text are jumps to the information referenced.
Overview
This document discusses how to:
• Install a single RocketPort USB Serial Hub.
Note: For specific hardware information, such as building cables or specifications, see the Hardware
Installation documentation, which is available on Comtrol media (diskette or CD) or you can
download the current version from the ftp/web site.
• Install multiple RocketPort USB Serial Hubs.
• Remove an existing driver.
• Install modems on the RocketPort USB Serial Hub.
• Contact Technical Support.
Comtrol hardware and software manuals are available in electronic form on Comtrol media and the Web/ftp
site. You can download driver updates at no charge from the Comtrol Web/ftp site. Always check the Web or
ftp sites to make sure that you have the current driver and documentation. The Web site also contains
information on extracting Comtrol software.
Installation Prerequisites
You will need the following to install the RocketPort USB Serial Hub:
• A computer with the Windows 2000 operating system and a functioning USB port or hub.
Note: For information about USB support, see http://www.usb.org.
• If you are using a USB hub instead of a USB port on your PC, make sure that the hub is self-powered
(external power supply attached).
• The Windows 2000 operating system CD.
• RocketPort USB Serial Hub with the USB cable.
• Driver for the RocketPort USB Serial Hub (from CD, diskette, or downloaded file).
Note: See the Removing the Software discussion before re-installing a driver.

Interactive Table of Contents
How to Use this Document 1
Overview 1
Installation Prerequisites 1
Installing a Single RocketPort USB Serial Hub 3
Installing Multiple RocketPort USB Serial Hubs 7
Installing Modems on the Serial Ports 9
Removing the Software 13
Contacting Technical Support 15
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Software Installation
Operating Systems
Manual PDF for Windows 98
Version Manual
B
Size Manual
466Kb
File Name
2000114b.pdf
Info
RocketPort USB Serial or Modem Hub
Driver Installation with Windows 98

How to Use this Document
You can use the interactive Table of Contents to locate the information you need.
Note: All blue underlined text are jumps to the information referenced.
Overview
This document discusses how to:
• Install a single RocketPort USB Serial or Modem Hub.
Note: For specific hardware information, such as building cables or specifications, see the Hardware
Installation documentation, which is available on Comtrol media (diskette or CD) or you can
download the current version from the ftp/web site.
• Install multiple RocketPort USB Serial Hubs or Modem Hubs.
• Remove an existing driver.
• Install modems on the RocketPort USB Serial Hub.
• Troubleshoot.
• Contact Technical Support.
Comtrol documentation (hardware and software) are available in electronic form on Comtrol media and the
Web/ftp site. Driver updates can be downloaded at no charge from the Comtrol Web/ftp site. Always check the
Web or ftp sites to make sure that you have the current driver and documentation. There is information about
extracting Comtrol software.
Installation Prerequisites
You will need the following to install the RocketPort USB Serial Hub or Modem Hub series:
• A computer with the Windows 98 operating system and a functioning USB port or hub.
Note: For information about USB support, see http://www.usb.org.
• If you are using a USB hub instead of a USB port on your PC, make sure that the hub is self-powered
(external power supply attached).
• The Windows 98 operating system CD.
• RocketPort USB Serial Hub or RocketPort USB Modem Hub unit with the USB cable.
• Driver for the RocketPort USB Serial or Modem Hub (from CD, diskette, or downloaded file).
Note: See the Removing the Software discussion before re-installing a driver.

Interactive Table of Contents
How to Use this Document 1
Overview 1
Installation Prerequisites 1
Installing a Single RocketPort USB Serial or Modem Hub 3
Installing Multiple RocketPort USB Serial and Modem Hubs 13
Installing Modems on the Serial Ports 15
Removing the Software 19
Troubleshooting 21
Using the Test Terminal Program to Test Serial Ports 21
Troubleshooting for the Modem Hub 23
Using the Test Terminal Program to Test Modem Ports 23
Test 1: Verify that the modem responds 24
Test 2: Test calls from the modem to a telephone. 24
Test 3: Call from modem to modem. 24
Contacting Technical Support 25
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Device Driver
Operating Systems
Windows 2000
Version Driver
1.08
Size Driver
130Kb
File Name
1800065b.exe
Info
Do NOT install this driver on a Windows XP or NT system. RocketPort(R) USB (Universal Serial Bus) Serial Hub
RocketPort(R) USB (Universal Serial Bus) Modem Hub
Windows 2000(R) Driver Installation Readme

DOCUMENT SCOPE AND LIMITS
You can use this file or the Software Installation documentation to install this driver and the hardware for the RocketPort USB Serial Hub and RocketPort USB Modem Hub.

For more information about hardware-specific topics, see the Hardware documentation.

INFORMATION AVAILABLE IN OTHER SOURCES
Documentation for this product is shipped on the Comtrol media (diskette or CD). There is a Hardware and Software document. If you can not locate your media, you can download the latest documentation or driver from the Comtrol web or ftp sites:
• http://www.comtrol.com
• ftp://ftp.comtrol.com

Note: Always check the web or ftp sites for current software or documentation.
UPDATING THE DRIVER
The Update feature is not supported. To update a driver, follow the REMOVING A DRIVER instructions, then use the INSTALL A DRIVER discussion to install the new driver.

INSTALLING THE ROCKETPORT USB SERIAL/MODEM HUB (HARDWARE AND SOFTWARE)
Use the following procedure to install the RocketPort USB Serial or Modem Hub:

1. If you downloaded the driver from the ftp/web sites, extract the driver files to a directory on your PC (for example, C:\Comtrol).

2. Attach the RocketPort USB Serial or Modem Hub device to a standard USB port.

If you have previously installed the Windows USB Composite Device driver, go to Step 10.

3. Select Next when the USB Composite Device Add New Hardware Wizard screen appears.

4. Choose Search for best driver for your device" and select Next.

5. Insert your Windows 2000 CD in the drive.

6. Select CD-ROM drive and Next.

7. Select Next to install the Composite driver.

8. Remove the Windows 2000 CD from the drive.

9. Select Finish.

10. After detecting the RocketPort USB Serial Hub the system will present a dialog box labeled Insert Disk.

11. Insert the driver distribution floppy disk or CDROM if you have it and click OK. If you do not have a floppy disk or CDROM click OK.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Device Driver
Operating Systems
Windows 98
Version Driver
2.01
Size Driver
166Kb
File Name
1800043c.exe
Info
Do NOT install this driver in Windows 2000/XP operating systems. RocketPort USB Serial/Modem Hub
Windows 98 Driver Assembly
History File
================================================================================

2.01
06/30/00
Add INCLUDE to associate modem .inf with driver .inf
Add registery entries for modem strings and to identify modem driver

2.00
03/16/00
Fix 422 uninstall section to use correct uninstall .inf.

03/13/00
Add RocketPort USB Modem hub to assembly. Change all the .inf files.
Renamed rpushpg.exe to rpusbtl.exe. Renamed cmtlvxd.inf to cmtlsvxd.inf.

1.01
03/13/00
fixed standby mode problem where the ports disappeared when the computers
goes into standy mode.

1.00
02/23/00
Initial Release
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketPort USB Modem Hub
Description
Device Driver
Operating Systems
Windows XP
Version Driver
1.12
Size Driver
136Kb
File Name
1800065c.exe
Info
Do NOT install this driver in Windows 2000/XP operating systems. RocketPort USB Serial Hub Windows 2000 Driver
1800065
History File
================================================================================
1.12 03/18/02
Maintenance release. Update driver to version 3.25.

1.11 11/09/01
Maintenance release. Update driver to version 3.21.

1.10 8/23/01
Maintenance release. Update driver to version 3.20d.
Fixes for two abort conditions. One is caused by corruption of internal
memory and applies to both Windows 2000 and Windows XP. The other happens
after a surprise removal and applies to XP only.
1.09 4/3/01
Maintenance release. Update driver to version 3.17m.

1.08
3/13/01
Maintenance release. Update driver to version 3.17L.

1.07
3/8/01
Maintenance release. Update driver to version 3.17h.

1.06
3/6/01
Replace invalid modem INF with INF provided by modem vendor.

1.05
2/7/01
Update driver to version 3.17c. Remove Win98 INF files cmtlvxd.inf and
cmtlwdm.inf. Move cmtlw2k.inf to root directory. Add RPUSBMH
to cmtlw2k.inf. Add modem INF mdmctm2.inf.

1.04
10/3/00
Maintenance release.

1.03
9/13/00
Maintenance release. Fixed handling of requests for large output
buffers.

1.02
8/7/00
Maintenance release. Fixes the WCOM lockup problem (Incident 400).

1.01
8/2/00
Maintenance release. Fixes for various Win 2000 and other issues.

1.00
06/28/00
Initial Release
HelpDrivers Since March 2000