Comtrol RocketModem III v.90 uPCI Download Drivers, Utilities and Manual

Available 24 files for RocketModem III v.90 uPCI
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Rawrite.exe
Operating Systems
Diagnostic
Version Driver
A
Size Driver
14Kb
File Name
rawrite.exe
Info
This is a Microsoft-base utility that is used to create disk images for use with our diagnostic disk image files
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Linux
Version Driver
3.08
Size Driver
203Kb
File Name
rocketport-linux-3.08.tar.gz
Info
Supports all 2.4 and 2.6 kernels.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
LCOM Utility
Operating Systems
Linux
Version Utilities
1.01
Size Utilities
19Kb
File Name
1800194a.tgz
Info
For Linux Only. For information about using LCOM, see the manual page packaged with the files.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Diagnostic
Operating Systems
Manual
Version Manual
C
Size Manual
1.4Mb
File Name
1800055c.i
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
RM3 AT Command Set
Operating Systems
Manual PDF
Version Manual
B
Size Manual
933Kb
File Name
100722b_at cmds.pdf
Info
AT command set that supports the RocketModem III platform.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Linux
Version Manual
D
Size Manual
115Kb
File Name
rckt_linux.pdf
Info
RocketPort and RocketModem
Driver Installation for Linux

Installation Procedure
Use this procedure to install the driver.
1. If you have not done so already, install the hardware using the Hardware
Installation documentation.
2. If necessary, download the current device driver, copy and extract the files to
the /usr/src directory on the Linux system. For example:
Change to the /usr/src directory and use the untar command.
cd /usr/src
tar xzvf filename.tar.gz
A subdirectory of /usr/src now exists called comtrol. This contains the
RocketPort/RocketModem driver and associated files.
3. Recompile the RocketPort/RocketModem driver.
Note: This is not always necessary, depending on the version of your kernel,
but it is safe to do.
make clean
make
4. Install the RocketPort/RocketModem driver as root:
make install
5. If you are using more than one ISA RocketPort/RocketModem board, or have
installed an ISA RocketPort or RocketModem board at a non-standard
address, you will need to set up the file /etc/rocketport.conf. The /usr/src/comtrol
directory contains a sample rocketport.conf file. Copy it to the /etc directory and
edit it according to the comments contained in the file.
Note: This step is NOT necessary, if you are using only PCI RocketPort or
RocketModem boards.
6. Optionally, edit your /etc/rc.d/rc.S file (or other appropriate boot-up script) so
that the rc.rocket script runs automatically each time your system boots. This
is done for you automatically if you are using a system with System V init files,
such as is used in the RedHat or Debian releases.
7. Either reboot to load the driver into the currently running system, or
manually load the driver running the rc.rocket script with the start argument.
For example:
/rc.rocket start
8. Configure your applications and/or your getty scripts as appropriate for your
application.
Note: The RocketModem looks to Linux like a RocketPort card with modems
attached; you can refer to the RocketModem AT command set on the
Comtrol CD or ftp/web sites.
9. For PCI-ONLY installation:
Edit the rocketport.conf script to remove or comment out the boardx=0xxx"
statement.
10. Optionally, edit your /etc/rc.d/rc.S† file so that the rc.rocket script runs
automatically each time the system boots. For example:
/bin/sh /etc/rc.d/rc.rocket
†This file may have a different file name, depending upon the Linux
distribution type.
Note: The rc.rocket script requires that setrocket be installed in the /bin
directory. The setrocket program creates the ttyRx devices (where x is a
number designating the port). The setrocket program is structured much
like the familiar setserial program, and performs a similar function.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows 2000
Version Manual
C
Size Manual
638Kb
File Name
rckt_win2000.pdf
Info
Table of Contents
Table of Contents................................................................................................................................ 3
Overview............................................................................................................................................... 5
How to Use this Document .......................................................................................................................... 5
Driver Requirements................................................................................................................................... 5
Driver Features............................................................................................................................................. 5
Locating Hardware Installation Documentation .................................................................................. 5
Upgrading Your Operating System to Win2000 ..................................................................................... 6
Driver and Adapter Information ..................................................................................................... 7
Removing or Disabling the Adapter ........................................................................................................ 7
Installing the Driver .................................................................................................................................... 7
Upgrading the Driver ................................................................................................................................ 13
Accessing the Main Setup Tab.................................................................................................................. 17
Changing Device Properties..................................................................................................................... 18
Configuring Device Properties ................................................................................................................ 19
Configuring Port Properties..................................................................................................................... 20
Adding Additional Adapters ..................................................................................................................... 20
Configuring Modems Overview...................................................................................................... 21
Installing Modems...................................................................................................................................... 21
Comtrol Tools .................................................................................................................................... 25
Installing the Utilities (Windows 2000 and Windows XP).................................................................. 25
Using Test Terminal .................................................................................................................................. 27
Using Port Monitor .................................................................................................................................... 30
Using Peer Tracer ...................................................................................................................................... 35
Troubleshooting and Technical Support ..................................................................................... 37
Troubleshooting.......................................................................................................................................... 37
Technical Support...................................................................................................................................... 38
Index .................................................................................................................................................... 39
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows 98
Version Manual
THIRD EDITION
Size Manual
1Mb
File Name
rckt_win98.pdf
Info
Table of Contents
Table of Contents ................................................................................................................................3
Product Overview...............................................................................................................................5
Locating Current Drivers ............................................................................................................................ 5
Hardware Installation Documentation .................................................................................................... 5
Driver Features............................................................................................................................................. 5
Installation Prerequisites........................................................................................................................... 6
Installing the Device Driver..............................................................................................................7
Disabling or Removing the Driver ............................................................................................................ 7
Disabling the Windows 98/SE or ME Device Driver ....................................................................................................7
Removing PCI-Bus Adapters........................................................................................................................................7
Removing the Windows 98/SE or ME Device Driver ...................................................................................................7
Installing the New Driver........................................................................................................................... 8
Extracting the Installation Files..................................................................................................................................8
Installing Software: PCI, Universal PCI, or CompactPCI bus....................................................................................9
Installing Software: ISA-Bus......................................................................................................................................11
Advanced Configuration........................................................................................................................... 15
COM Port Numbering.................................................................................................................................................15
Remapping Baud Rates ..............................................................................................................................................16
Scan Rate.....................................................................................................................................................................17
Installation Without a Dedicated IRQ........................................................................................................................17
Stay Resident ..............................................................................................................................................................17
Fast ..............................................................................................................................................................................17
Changing the IRQ .......................................................................................................................................................17
Adding Adapters ......................................................................................................................................... 18
Adding PCI-Bus Adapters ..........................................................................................................................................18
Adding ISA-Bus Adapters...........................................................................................................................................18
Installing Modems and Adding Serial Printers..........................................................................21
Installing Modems ...................................................................................................................................... 21
Installation Requirements..........................................................................................................................................21
Installing a Modem .....................................................................................................................................................21
RocketModem Reconfiguration...................................................................................................................................27
Adding Serial Printers ............................................................................................................................... 28
Changing Printer Port Configuration .........................................................................................................................31
Changing Printer Port Assignment ............................................................................................................................31
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows ME
Version Manual
THIRD EDITION
Size Manual
1Mb
File Name
rckt_win98.pdf
Info
Table of Contents
Table of Contents ................................................................................................................................3
Product Overview...............................................................................................................................5
Locating Current Drivers ............................................................................................................................ 5
Hardware Installation Documentation .................................................................................................... 5
Driver Features............................................................................................................................................. 5
Installation Prerequisites........................................................................................................................... 6
Installing the Device Driver..............................................................................................................7
Disabling or Removing the Driver ............................................................................................................ 7
Disabling the Windows 98/SE or ME Device Driver ....................................................................................................7
Removing PCI-Bus Adapters........................................................................................................................................7
Removing the Windows 98/SE or ME Device Driver ...................................................................................................7
Installing the New Driver........................................................................................................................... 8
Extracting the Installation Files..................................................................................................................................8
Installing Software: PCI, Universal PCI, or CompactPCI bus....................................................................................9
Installing Software: ISA-Bus......................................................................................................................................11
Advanced Configuration........................................................................................................................... 15
COM Port Numbering.................................................................................................................................................15
Remapping Baud Rates ..............................................................................................................................................16
Scan Rate.....................................................................................................................................................................17
Installation Without a Dedicated IRQ........................................................................................................................17
Stay Resident ..............................................................................................................................................................17
Fast ..............................................................................................................................................................................17
Changing the IRQ .......................................................................................................................................................17
Adding Adapters ......................................................................................................................................... 18
Adding PCI-Bus Adapters ..........................................................................................................................................18
Adding ISA-Bus Adapters...........................................................................................................................................18
Installing Modems and Adding Serial Printers..........................................................................21
Installing Modems ...................................................................................................................................... 21
Installation Requirements..........................................................................................................................................21
Installing a Modem .....................................................................................................................................................21
RocketModem Reconfiguration...................................................................................................................................27
Adding Serial Printers ............................................................................................................................... 28
Changing Printer Port Configuration .........................................................................................................................31
Changing Printer Port Assignment ............................................................................................................................31
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows NT4
Version Manual
D
Size Manual
672Kb
File Name
rckt_winnt.pdf
Info
Table of Contents
Table of Contents................................................................................................................................ 3
Overview............................................................................................................................................... 5
How to Use this Document .......................................................................................................................... 5
Driver Requirements................................................................................................................................... 5
Locating Hardware Installation Documentation .................................................................................. 5
Installation Prerequisites ........................................................................................................................... 6
Driver and Adapter Information ..................................................................................................... 7
Removing an Existing Driver ..................................................................................................................... 7
Installing the Device Driver ....................................................................................................................... 8
Changing or Viewing Driver Configuration ......................................................................................... 15
Changing or Viewing Adapter Configuration ...................................................................................... 17
Changing or Viewing Port Configuration ............................................................................................. 19
Adding an Adapter ..................................................................................................................................... 22
Removing an Adapter................................................................................................................................ 22
Windows NT Configuration Overview.......................................................................................... 23
Configuring Modems ................................................................................................................................. 23
Installing and Configuring RAS............................................................................................................... 26
Configuring Printers ................................................................................................................................. 31
Comtrol Tools .................................................................................................................................... 34
Using Test Terminal .................................................................................................................................. 34
Using Port Monitor .................................................................................................................................... 37
Using Peer Tracer ...................................................................................................................................... 42
Troubleshooting and Technical Support ..................................................................................... 44
Troubleshooting.......................................................................................................................................... 44
Device Driver and OS Capabilities and Limitations........................................................................... 45
Technical Support...................................................................................................................................... 47
Index .................................................................................................................................................... 48
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows Server 2003
Version Manual
C
Size Manual
3.4Mb
File Name
rckt_winxp.pdf
Info
This guide was originally written for Windows XP, but you can also use it for Windows Server 2003 installations. Table of Contents
Overview ............................................................................................................................................................... 5
Driver Requirements ....................................................................................................................................... 5
Locating Current Drivers ................................................................................................................................ 5
Hardware Installation Documentation............................................................................................................ 5
Driver Features................................................................................................................................................ 6
Upgrading Your Operating System to Windows XP ....................................................................................... 6
Installing the Device Driver............................................................................................................................. 7
Installation Procedures.................................................................................................................................... 7
Upgrading the Driver (Existing Installation).................................................................................................. 9
Found New Hardware Wizard Installation (Driver Not Found) .................................................................. 15
Changing or Configuring Device Properties.................................................................................................. 19
Configuring Port Properties ........................................................................................................................... 21
Removing the Adapter and Driver ................................................................................................................. 24
Configuring Non-Plug and Play Devices...................................................................................................... 25
Installing Non-Plug and Play Devices ........................................................................................................... 25
Comtrol Tools..................................................................................................................................................... 33
Installing the Utilities (Windows 2000 and Windows XP) ........................................................................... 33
Using Test Terminal ...................................................................................................................................... 35
Using Port Monitor ........................................................................................................................................ 38
Using Peer Tracer .......................................................................................................................................... 43
Troubleshooting and Technical Support ..................................................................................................... 45
Troubleshooting.............................................................................................................................................. 45
Before calling Technical Support ................................................................................................................... 45
Technical Support .......................................................................................................................................... 46
Index .................................................................................................................................................................... 47
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Software Installation
Operating Systems
Manual PDF for Windows XP
Version Manual
C
Size Manual
3.4Mb
File Name
rckt_winxp.pdf
Info
This guide was originally written for Windows XP, but you can also use it for Windows Server 2003 installations. Table of Contents
Overview ............................................................................................................................................................... 5
Driver Requirements ....................................................................................................................................... 5
Locating Current Drivers ................................................................................................................................ 5
Hardware Installation Documentation............................................................................................................ 5
Driver Features................................................................................................................................................ 6
Upgrading Your Operating System to Windows XP ....................................................................................... 6
Installing the Device Driver............................................................................................................................. 7
Installation Procedures.................................................................................................................................... 7
Upgrading the Driver (Existing Installation).................................................................................................. 9
Found New Hardware Wizard Installation (Driver Not Found) .................................................................. 15
Changing or Configuring Device Properties.................................................................................................. 19
Configuring Port Properties ........................................................................................................................... 21
Removing the Adapter and Driver ................................................................................................................. 24
Configuring Non-Plug and Play Devices...................................................................................................... 25
Installing Non-Plug and Play Devices ........................................................................................................... 25
Comtrol Tools..................................................................................................................................................... 33
Installing the Utilities (Windows 2000 and Windows XP) ........................................................................... 33
Using Test Terminal ...................................................................................................................................... 35
Using Port Monitor ........................................................................................................................................ 38
Using Peer Tracer .......................................................................................................................................... 43
Troubleshooting and Technical Support ..................................................................................................... 45
Troubleshooting.............................................................................................................................................. 45
Before calling Technical Support ................................................................................................................... 45
Technical Support .......................................................................................................................................... 46
Index .................................................................................................................................................................... 47
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
RRAS Overview
Operating Systems
Manual PDF for Windows XP
Version Manual
A
Size Manual
868Kb
File Name
winxp_rras.pdf
Info
RRAS Configuration Overview for Windows XP. RRAS Configuration Overview for
Windows XP

Note: This document contains sample procedures to assist you in quickly enabling
RRAS and installing a modem in RRAS. There are several ways in which to
do this. If you are familiar with a different method, feel free to use your own
method.
This is not a complete procedure for configuring RRAS. For additional
information, use the Microsoft help system or contact Microsoft Corporation
for more in depth RRAS support.

Setting Up RRAS
Use the following procedure as a reference to set up RRAS in Windows XP.
1. Open the Control Panel (from the Start button) and select Administrative Tools.
2. Double-click on the Services icon.
3. Right-click on the Routing and Remote Access entry and select Properties.
4. Select Automatic from the Startup type drop list.
5. Select the Start button.
6. Select Ok to close the Routing and Remote Access Properties (Local Computer)
window.
7. Close the Services control panel.
8. Close the Administrative Tools Control
panel.

Adding Modem to RRAS
Use the following procedure as a reference if you need assistance with setting up
incoming calls on a modem port.
1. Open the Control Panel, right-click the Network Connections icon, and select
Open.
2. Right-click the Incoming Connections icon and select Properties.
3. Select the modem or modems that you want to setting up incoming calls upon.
4. Select the Users tab and select the users that are permitted dial-in permission.
Note: If necessary, use the Add button to add addition users.
5. Select the Networking tab, configure any necessary protocols, and select Ok.
6. Close the Network Connections control panel.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Using Comtrol Diagnostics
Operating Systems
Manual TXT
Version Manual
A
Size Manual
3Kb
File Name
readme.txt
Info
USING COMTROL DIAGNOSTICS

You will need to download at least two files from the Diag
directory to create your own bootable floppy diagnostic diskette.
Contained in each Diag directory are the following files:

* Diskette image file (*.i)

* Rawrite.exe

Note: The Rawrite3.doc file contains similar information as
this file.
MAKING BOOTABLE DIAGNOSTIC DISKETTES
------------------------------------
To run the diagnostics, you will need to create your own bootable
diagnostic diskette using a High-Density (HD), 1.44M diskette and
using the directions for one of the following operating systems:

* Windows

* DOS

* Unix

-------
WINDOWS
-------
To create a bootable diagnostics diskette, after downloading the
image file and Rawrite.exe from the Comtrol ftp site:

1. Obtain a formatted 1.44MB diskette.

2. Go to the appropriate Diag directory for your hardware type
and double-click on Rawrite.exe.

RaWrite may be aborted at any time by typing ^C or CTRL-Break.

3. Enter the disk image source file name. For example:

150xxxxY.i or 180xxxxY.i

where: xxxx are numbers and Y is an alpha-character.

4. Enter the target diskette drive. For example: a

5. Insert the formatted diskette into the target drive and press
the ENTER key.
---
DOS
---
To create a bootable diagnostics diskette, after downloading the
image file and Rawrite.exe from the Comtrol ftp site:

1. Obtain a formatted 1.44MB diskette.

2. To format a diskette in drive: a, type at the DOS prompt:
format a:

3. At the DOS prompt, enter the appropriate directory path from
the CD. For example:

4. To start Rawrite, type:

\ rawrite
----
UNIX
----
To create a bootable diagnostics diskette, use the dd command to
copy the diskette image file out to a floppy drive. For example:

dd if=/
of=/dev/rfd0135ds18 (primary 3.5" drive)
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Using MiniCom
Operating Systems
Manual TXT Linux
Version Manual
C
Size Manual
7Kb
File Name
minicom.txt
Info
For Linux Only Using minicom to Test Comtrol Ports
-----------------------------------
This document discusses how to use minicom in Linux to test ports using
a null-modem cable connected between two ports. If necessary, cabling
information is available in each product’s User Guide or hardware
installation document.

Note: This document uses ports ttyRP0 and ttyRP1 in the examples.
You will need to substitute the port numbers that you will be
testing, where appropriate, for your environment.

Hardware Type Port Nomenclature
-------------- -----------------
DeviceMaster AIR ttySIx
DeviceMaster PRO ttySIx
DeviceMaster RTS ttySIx
DeviceMaster Serial Hub ttySIx
DeviceMaster2 ttySIx
RocketModem III ttyRx
RocketModem IV ttyRx
RocketPort Express ttyRPx
RocketPort Infinity ttyRPx
RocketPort ISA ttyRx
RocketPort uPCI ttyRx

Where x is the port number, which begins at 0 (zero) and
continues sequentially.

Note: Linux is case-sensitive, be sure to use the proper case. tty is
lowercase, R, RP, and SI are in uppercase.

See "Testing a RocketModem" later in this document for instructions
on testing modem ports.
--------------------
Testing Serial Ports
--------------------

Use this procedure to test serial ports.

1. Verify that the driver has been installed and loaded using the driver
installation README file.

2. Connect a null-modem cable from the first port to the second port on
the device. If it is a 1-port device, connect Port 1 to a native
serial port or connect the loopback plug, which means that there
is only one minicom session.

3. If you have not already done so, log in to your Linux system.

4. Open a terminal window (GNOME, xterm, gterm, etc.) In GNOME select,
Accessories-->Terminal.

5. Type su and enter the root password.

6. List the Comtrol ports.

[root@localhost/dev]# ls /dev/ttyRP*

This should show the tty ports that have been installed beginning at 0
(zero) and sequentially numbered to the highest port on the device.

For example, a RocketPort Infinity 16-port has ttyRP0 through ttyRP15
displays as:

ttyRP0 ttyRP10 ttyRP12 ttyRP14 ttyRP2 ttyRP4 ttyRP6 ttyRP8
ttyRP1 ttyRP11 ttyRP13 ttyRP15 ttyRP3 ttyRP5 ttyRP7 ttyRP9

7. Start minicom with the setup option.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows 2000
Version Driver
4.74
Size Driver
384Kb
File Name
rp-winxp2k-4.81.exe
Info
FAX Class 1 & 1.0: When using the Microsoft TAPI, there may be a long delay in responding to adaptive answer. You may receive the CONNECT message twice. Some FAX applications including Microsoft FAX, may have problems operating in FAX class 1 & 1.0.
For these reasons, Comtrol Technical Support recommends using FAX class 2.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Utilities (Test Terminal, Port Monitor, and PEER)
Operating Systems
Windows 2000
Version Utilities
3.02
Size Utilities
504Kb
File Name
comtrol_utility_package_v3.02.msi
Info
Execute this file on your system and follow the Installation Wizard. Comtrol Utility Package for the Windows(R) 2000, XP, Server 2003
and Vista Operating Systems

P/N: 1800260

REVISION HISTORY
=====================================================================
V3.02 6/30/08

Changes made to PMon2.exe
-Removed the embedded Manifest and put it next to the EXE file.

Changes made to WCom2.exe
-Removed the embedded Manifest and put it next to the EXE file.
- Fixed an issue that was causing the OS to hang while trying to
kill the active threads.

V3.01 2/13/08

Changes made to PMon2.exe
-Signed the application using the authenticode signature.

Changes made to WCom2.exe
-Signed the application using the authenticode signature.

Changes made to Comtrol_Utility_Package.msi
-Signed the assembly using the authenticode signature.
-Changed the naming convention to include the version number.

V3.00 9/25/06

Changes made to PMon2.exe
-Added the support for 64-bit drivers.

Changes made to FreePort
-Modified the source code to support 64-bit drivers.

Changes made to Comtrol_Utility_Package.msi
-Peer.exe and Peer.hlp are no longer included in the package.

V2.00 8/24/06

Changes made to WCom2.exe
-"Hex Display" was added to support DM 500K.
-"Send ASCII/Hex String" was added to support DM 500K.
-Default status of the port toolbar changed to DISABLED.

Changes made to WCom2.chm
-Modified to reflect the above-mentioned changes.

Changes made to Comtrol_Utility_Package.msi
-It is designed using the new installer.

V1.03 2/23/06

Changes made to WCom2.exe
-Fixed the issue regarding PnPIdTest.
-Fixed the issue regarding closing the ports

V1.02 2/2/06

Changes made to WCom2.exe
-Enhanced the command-line interpreter
-Fixed the buffer issue for Miscellaneous settings
-Fixed active debug issues
-Loopback Test now checks the quality of data transfer
-Making it more efficient in regard to consumption of
system resources
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows 98
Version Driver
1.71
Size Driver
383Kb
File Name
1800004e.exe
Info
Do NOT install this driver in Windows 2000/XP operating systems Readme File
RocketPort/RocketModem Series Driver for Windows 98/SE and Windows ME
P/N: 1800004
=============================================================================

This readme file provides you with a links to the Software Installation Guide for
this driver.

See the History.txt file for information about the hardware platforms that are
supported by this driver.
DOWNLOAD THE LATEST
---------------------------------------
Use this link to download the latest released driver for your hardware.
http://support.comtrol.com/download.asp?partnumber=1800004

Use this link to download the latest Software Installation Guide.
http://support.comtrol.com/download.asp?partnumber=2000101
USE THE SOFTWARE AND DOCUMENTATION CD
---------------------------------------------------------------------------
You can use the menu system to locate the driver and documentation shipped with
the hardware.

Optionally, you can located the driver and installation documentation by browsing
the CD to the appropriate hardware platform and operating system. The Software
Installation Guide is located in the SW_Doc subdirectory for that operating
system. Hardware installation information is available in the HW_Doc subdirectory
for your platform.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows ME
Version Driver
1.71
Size Driver
383Kb
File Name
1800004e.exe
Info
Do NOT install this driver in Windows 2000/XP operating systems Readme File
RocketPort/RocketModem Series Driver for Windows 98/SE and Windows ME
P/N: 1800004
=============================================================================

This readme file provides you with a links to the Software Installation Guide for
this driver.

See the History.txt file for information about the hardware platforms that are
supported by this driver.
DOWNLOAD THE LATEST
---------------------------------------
Use this link to download the latest released driver for your hardware.
http://support.comtrol.com/download.asp?partnumber=1800004

Use this link to download the latest Software Installation Guide.
http://support.comtrol.com/download.asp?partnumber=2000101
USE THE SOFTWARE AND DOCUMENTATION CD
---------------------------------------------------------------------------
You can use the menu system to locate the driver and documentation shipped with
the hardware.

Optionally, you can located the driver and installation documentation by browsing
the CD to the appropriate hardware platform and operating system. The Software
Installation Guide is located in the SW_Doc subdirectory for that operating
system. Hardware installation information is available in the HW_Doc subdirectory
for your platform.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows NT4
Version Driver
4.56
Size Driver
517Kb
File Name
rp-winnt-4.81.exe
Info
FAX Class 1 & 1.0: When using the Microsoft TAPI, there may be a long delay in responding to adaptive answer. You may receive the CONNECT message twice. Some FAX applications including Microsoft FAX, may have problems operating in FAX class 1 & 1.0.
For these reasons, Comtrol Technical Support recommends using FAX class 2.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows Server 2003
Version Driver
4.74
Size Driver
384Kb
File Name
rp-winxp2k-4.81.exe
Info
for Windows XP. You can use this for Windows Server 2003 installations. FAX Class 1 & 1.0: When using the Microsoft TAPI, there may be a long delay in responding to adaptive answer. You may receive the CONNECT message twice. Some FAX applications including Microsoft FAX, may have problems operating in FAX class 1 & 1.0.
For these reasons, Comtrol Technical Support recommends using FAX class 2.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Utilities (Test Terminal, Port Monitor, and PEER)
Operating Systems
Windows Server 2003
Version Utilities
3.02
Size Utilities
504Kb
File Name
comtrol_utility_package_v3.02.msi
Info
Execute this file on your system and follow the Installation Wizard. Comtrol Utility Package for the Windows(R) 2000, XP, Server 2003
and Vista Operating Systems

P/N: 1800260

REVISION HISTORY
=====================================================================
V3.02 6/30/08

Changes made to PMon2.exe
-Removed the embedded Manifest and put it next to the EXE file.

Changes made to WCom2.exe
-Removed the embedded Manifest and put it next to the EXE file.
- Fixed an issue that was causing the OS to hang while trying to
kill the active threads.

V3.01 2/13/08

Changes made to PMon2.exe
-Signed the application using the authenticode signature.

Changes made to WCom2.exe
-Signed the application using the authenticode signature.

Changes made to Comtrol_Utility_Package.msi
-Signed the assembly using the authenticode signature.
-Changed the naming convention to include the version number.

V3.00 9/25/06

Changes made to PMon2.exe
-Added the support for 64-bit drivers.

Changes made to FreePort
-Modified the source code to support 64-bit drivers.

Changes made to Comtrol_Utility_Package.msi
-Peer.exe and Peer.hlp are no longer included in the package.

V2.00 8/24/06

Changes made to WCom2.exe
-"Hex Display" was added to support DM 500K.
-"Send ASCII/Hex String" was added to support DM 500K.
-Default status of the port toolbar changed to DISABLED.

Changes made to WCom2.chm
-Modified to reflect the above-mentioned changes.

Changes made to Comtrol_Utility_Package.msi
-It is designed using the new installer.

V1.03 2/23/06

Changes made to WCom2.exe
-Fixed the issue regarding PnPIdTest.
-Fixed the issue regarding closing the ports

V1.02 2/2/06

Changes made to WCom2.exe
-Enhanced the command-line interpreter
-Fixed the buffer issue for Miscellaneous settings
-Fixed active debug issues
-Loopback Test now checks the quality of data transfer
-Making it more efficient in regard to consumption of
system resources
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Device Driver
Operating Systems
Windows XP
Version Driver
4.74
Size Driver
384Kb
File Name
rp-winxp2k-4.81.exe
Info
FAX Class 1 & 1.0: When using the Microsoft TAPI, there may be a long delay in responding to adaptive answer. You may receive the CONNECT message twice. Some FAX applications including Microsoft FAX, may have problems operating in FAX class 1 & 1.0.
For these reasons, Comtrol Technical Support recommends using FAX class 2.
Company
Comtrol
Categories
Fax & Modem & ISDN
Model
Comtrol RocketModem III v.90 uPCI
Description
Utilities (Test Terminal, Port Monitor, and PEER)
Operating Systems
Windows XP
Version Utilities
3.02
Size Utilities
504Kb
File Name
comtrol_utility_package_v3.02.msi
Info
Execute this file on your system and follow the Installation Wizard. Comtrol Utility Package for the Windows(R) 2000, XP, Server 2003
and Vista Operating Systems

P/N: 1800260

REVISION HISTORY
=====================================================================
V3.02 6/30/08

Changes made to PMon2.exe
-Removed the embedded Manifest and put it next to the EXE file.

Changes made to WCom2.exe
-Removed the embedded Manifest and put it next to the EXE file.
- Fixed an issue that was causing the OS to hang while trying to
kill the active threads.

V3.01 2/13/08

Changes made to PMon2.exe
-Signed the application using the authenticode signature.

Changes made to WCom2.exe
-Signed the application using the authenticode signature.

Changes made to Comtrol_Utility_Package.msi
-Signed the assembly using the authenticode signature.
-Changed the naming convention to include the version number.

V3.00 9/25/06

Changes made to PMon2.exe
-Added the support for 64-bit drivers.

Changes made to FreePort
-Modified the source code to support 64-bit drivers.

Changes made to Comtrol_Utility_Package.msi
-Peer.exe and Peer.hlp are no longer included in the package.

V2.00 8/24/06

Changes made to WCom2.exe
-"Hex Display" was added to support DM 500K.
-"Send ASCII/Hex String" was added to support DM 500K.
-Default status of the port toolbar changed to DISABLED.

Changes made to WCom2.chm
-Modified to reflect the above-mentioned changes.

Changes made to Comtrol_Utility_Package.msi
-It is designed using the new installer.

V1.03 2/23/06

Changes made to WCom2.exe
-Fixed the issue regarding PnPIdTest.
-Fixed the issue regarding closing the ports

V1.02 2/2/06

Changes made to WCom2.exe
-Enhanced the command-line interpreter
-Fixed the buffer issue for Miscellaneous settings
-Fixed active debug issues
-Loopback Test now checks the quality of data transfer
-Making it more efficient in regard to consumption of
system resources
HelpDrivers Since March 2000