GTCO CalComp Creation Station Pro Download Drivers and Utilities

Available 3 files for Creation Station Pro
Company
GTCO CalComp
Categories
Mouse & Keyboard & Other Input
Model
GTCO CalComp Creation Station Pro
Description
DOS Microsoft Mouse Emulation Driver
Operating Systems
MS-DOS
Version Driver
3-31-98
Size Driver
11.7Kb
File Name
ccmouse.exe
Info
May also be used as diagnostic test utility.
---------------------------------------------------------------------

Software Setup Using the CCMOUSE DOS Driver/Utility

1. Download the ccmouse.exe file and expand the file by double-clicking on the file. The following file will be extracted:

ccmouse.com

2. Reboot your computer directly to a DOS prompt.

3. Be sure that your tablet is connected to a serial port and that the power is on.

4. From the directory containing the ccmouse.com file, type .

5. You will see one of the following groups of text:

CalComp Mouse/ADI Driver Version 10.02
(C) Copyright CalComp Input Technologies 1997. All rights reserved.
Driver installed; 12.00 by 12.00 inch tablet found on COM1:

CalComp Mouse/ADI Driver Version 10.02
(C) Copyright CalComp Input Technologies 1997. All rights reserved.
Driver not installed -- CalComp Tablet not found

Note: Pay attention to the text in red. This will tell you whether or not the tablet is communicating with
the computer. The text may vary slightly depending on the type of CalComp tablet being used.

6. If the tablet is not found, try switching COM ports and running ccmouse again.

7. If the tablet is still not found, try running ccmouse specifically for the COM port the tablet is connected to by
using one of the following commands:

(For tablets on COM1)
(For tablets on COM2)

8. If this does not work, one of the following scenarios may be true:

a. Another internal device may be using the same resources as the tablet.
b. The COM port may be defective.
c. The COM port may not be setup correctly in the system BIOS.
Company
GTCO CalComp
Categories
Mouse & Keyboard & Other Input
Model
GTCO CalComp Creation Station Pro
Description
TabletWorks
Operating Systems
Windows 3.x Other Oper. Systems
Version Driver
10.05
Size Driver
11.8Mb
File Name
tw-10.05.0005.exe
Info
This version of TabletWorks has not been tested on these tablets, however it should work.
Company
GTCO CalComp
Categories
Mouse & Keyboard & Other Input
Model
GTCO CalComp Creation Station Pro
Description
Test Programs Tablet Configuration Utilities TabletWorks for Citrix
Operating Systems
Windows 95-98-98Se-Me-NT4-2000-XP
Version Utilities
5.x - 7.x
Size Utilities
12Mb
File Name
tcu_3.06.0003.exe
Info
The Tablet Configuration Utilities (TCU) are a series of programs designed to test your tablet when you are troubleshooting
problems and to configure it. Many of the menu options described here are dynamic and, in some cases, tablet-specific, so
they may not be applicable to your system. You can use the TCU on your own to troubleshoot digitizer problems or configure
your tablet, or your Technical Support specialist may ask you to load it to assist him or her when diagnosing problems.
Download and Install the Tablet Configuration Utilities
1 On the www.gtcocalcomp.com Web site, click on the Support menu and select your tabletís manufacturer. Click on
the Test Program link.
2 Click on the TCU_Setup.exe link and download the file to a local directory on your PC.
3 Use Windows Explorer to locate the downloaded file. Double-click on the filename to begin the TCU installation.
Follow the onscreen prompts to complete the installation.
4 Select Start> Programs> GTCO CalComp TCU> Tablet Configuration Utilities to start up the TCU.
for Testing and Configuring GTCO CalComp Digitizers
Tablet Configuration Utilities
If your tablet is not being found by Windows and the TCU, it is possible that Windows or another application is using your
COM port. Sometimes Windows grabs a COM port and hangs on to it or installs an incompatible driver on it. Use the Windows
Device Manager to verify that your COM Ports are available to your tablet and all devices are working properly.
Using the Tablet Configuration Utilities
The TCU was designed to enable you to run diagnostics on, or configure, your tablet. In addition, the TCU provides a way for
GTCO CalCompís Tech Support specialists to remotely help you diagnose your systemís problems. The test utilities identify the
primary origins of system failure.
On the Main Screen, the options on the File menu offer a selection of utilities that test all the Serial ports, search for Wintab
drivers, and refresh system information. The Options menu provides a grid and cursor button test utility and a utility that
displays Wintab driver information.
The Main Screen
The TCU Main Screen is divided into two sections. The first section displays System Information and the bottom section
displays Device Information.
System Information Displays information about your operating system, COM port icons, and a TabletWorks icon,
when and if they are detected. The icons represent ports or driver interfaces that the user can
search for supported tablets.
Device Information Displays information about detected tablets, or an explanation when a search is unsuccessful.
HelpDrivers Since March 2000