Logic3 JT262 Download Drivers

Available 1 files for JT262
Logic3 JT262
Operating Systems
Windows 95-98-Me
Version Driver
Size Driver
File Name

The following is the important information of Logic3 JT262 installation driver.

Driver Installation instructions for PC.

Important! These instructions may not be applicable to consoles.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the JT262 model that was downloaded (for example c:\JT262). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Remove any previus Logic3 JT262 driver from Windows control panel and reboot the system.

  • Windows now detects Logic3 JT262 and searchs for a driver: you must stop any request and hit on "Cancel button".

  • Double click on Setup.exe (or similar file xxx.exe) located in c:\JT262 folder

  • Follow the on screen istructions

  • Search and consult the Readme file for additional installation drivers instructions for your JT262.

  • If during installation in Windows, you will be prompted with a message warning that the driver software for JT262 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Logic3, and safe to use.

  • Reboot the system

  • Congratulations, the drivers for Logic3 JT262 is installed.

Available 1 Drivers

HelpDrivers Since March 2000