Promise FastTrak SX4000 Download Drivers, Utilities and Manual

Utility to test DIMM compatibility with the FastTrak SX series. NOTE: Although this utility will test any capacity DIMM, the FastTrak SX series controller only supports DIMM capacities of 64MB, 128MB, and 256MB.
NOTE: Although this utility will test any capacity DIMM, the FastTrak SX series controller only supports DIMM capacities of 64MB, 128MB, and 256MB.

User Manual for PRomise Array ManageMent (PAM) local and remote array monitoring and configuration software.

Quick Install Guide for the FastTrak SX4000 RAID controller

User Manual for the FastTrak SX4000 RAID controller

a. Fixed the problem that soMetiMes RAID mode is not shown in the conversion wizard.
b. Fixed the problem that if no disks are selected when creating an array, there is no Message box popup to notify the user why the array can't be created.
c. Add a new event for Bad Sector Log Cleared.
d. Fix the problem that it won't show the disk selection for array migration. e. Add SuperSwap 4100 support (for FastTrak S150 SX4 only)

1. Added the Online Array Expansion and Online Array Migration funtion.
2. Added the Pause option during array initalization.
3. Enabled the pop-up Message function when the PAM window is minimized.
4. Removed the Auto Switch option fRom the cache setting option.

- Adds write-back/write-through cache option

- Improved look and feel NOTE: In order to use this version of PAM for FastTrak SX4000, you must also use Windows driver version 1.02.0.6. Do not use this version of PAM with an earlier version of the FastTrak SX4000 driver