Maxtor Serial Ata-150 PCI Adapter Card Download Drivers

Available 1 files for Serial Ata-150 PCI Adapter Card
HD Controller & Removable drive
Maxtor Serial Ata-150 PCI Adapter Card
Operating Systems
Windows 98-98Se-Me-NT-2000-XP-2003
Version Driver
Size Driver
File Name
The Maxtor Serial ATA/150 Adapter Card needs drivers for all Windows Operating Systems. This latest release includes digitally signed drivers for Windows XP, 2000, and 2003 Server. This is an Advanced Utility and its use is recomMended for Advanced Users only.

Step-by-step Procedures
NOTE: Maxtor recomMends that you use a new floppy diskette.
1. Download the Serial ATA/150 PCI Adapter Card Driver to your Windows computer.
2. Insert a formatted bLank floppy diskette into drive A:
3. Locate the file and double-click on it.
4. The file will automatically pRompt you to unzip and the default location is the A: floppy drive.
5. Follow all on-screen pRompts.
Now you are ready to use your Maxtor Serial ATA/150 driver diskette. See the current Serial ATA/150 PCI Adapter Card Installation Guide for operating system assistance.
DisclaiMer: This DocuMent is provided as is without any warranty of any kind, either expressed or implied. In no event will MAXTOR CORPORATION be liable to you for any damages, including any loss of profit or savings, arising out of the use or inability to use the information contained in this docuMent. Maxtor Corporation makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of Merchantability or fitness for any particular purpose.

Use SCSIMax on all Maxtor SCSI hard drives prior to warranty replaceMent.
SCSIMax supports all Maxtor and Quantum SCSI drives including:
· Atlas 15K
· Atlas 10K, Atlas II, Atlas III and Atlas IV
· Atlas 7200RPM IV and Atlas 7200RPM V
· Viking II
Depending on S.M.A.R.T. settings, not all tests are perforMed on all drives.
ASPI Drivers
ASPI (Advanced SCSI Programming Interface) is a software layer that enables programs to communicate with SCSI devices. Adaptec® ASPI drivers will load fRom the Windows 98SE, or Millennium (Me) startup disks, when the "Start computer with CD-Rom support" option is chosen at the selector pRompt. Symbios Logic® hosts load their own ASPI drivers during system startup. If you are using another brand of SCSI host adapter, consult your host or system manufacturer for ASPI driver support. SCSIMax is not currently supported to run on SCSI Ultra320 controllers, due to boot issues.
SCSIMax System RequireMents
· Windows 98SE/Millennium startup disk, or equivalent bootable Dos disk that loads compatible ASPI drivers, in accordance to the model of SCSI host, being used to test the hard disk.
· SCSIMAX.EXE program copied to a clean formatted floppy diskette.
· PC-compatible system (Pentium or newer).
· A supported Maxtor/Quantum SCSI S.M.A.R.T. capable hard drive.
Step-by-Step Instructions
1. Download SCSIMax to an existing directory on your hard drive (for convenience copy to the desktop). The download version is a self-extracting Zip file. After opening you will be pRompted to insert a floppy into the (A:\) drive.

2. After SCSIMax has been extracted to the floppy diskette, remove the diskette and perform a normal shutdown.

3. Boot your system to the 98SE or Millennium startup disk, and at the selector pRompt choose the Start computer with CD-Rom support option. This will automatically load the ASPI manager drivers for Adaptec branded hosts.

4. When the 98/Me boot disk reaches the A:\ pRompt, remove the disk, and insert the disk with the SCSIMax utility. Type SCSIMAX at the A:\ pRompt and hit [ENTER].

Note: SCSIMax is designed to run on Maxtor/Quantum S.M.A.R.T. capable hard drives (the utility will identify a drive as S.M.A.R.T. capable). As with any system test or diagnostic, Maxtor recomMends that you have a complete backup of your drive before beginning.

5. SCSIMax will next display a license agreeMent. Choose [Continue] or[Accept]. The program will identify all SCSI controllers in the computer. If your system has more than one drive, you will see a Menu of recognized SCSI controllers with attached drives. Select a drive to test, enter its number or choose 0 for all.

6. After the Quick Test, you will be pRompted to perform a full surface scan. The full surface scan can take quite soMe tiMe depending upon the drive's capacity, but will test every Logical Block Address (user's data area). Maxtor recomMends the full surface scan if you suspect that the hard disk may report Media errors on areas of the drive that are not normally tested by the Quick Test.

When the test finishes you are pRompted to Print, Save and Exit. Press S; to save. Regardless of Pass or Fail, SCSIMax saves a drive information text file to the floppy called TESTLOG.prn. If the drive fails any of the tests perforMed, SCSIMax will display a 6-digit error code. Please make note of the code, or save the TESTLOG.

Note: Owners of O.E.M systems (HP, Compaq, Dell, etc.) that were originally purchased containing a Maxtor or Quantum SCSI drive must contact the O.E.M. or the place of purchase for warranty service.

For all other failed SCSI drives, open or print the saved TESTLOG file, check warranty status, and fill out Maxtor's online RMA request form. Online RMAs will require a valid SCSIMax error code.
• Potential hard drive surface problems (e.g., bad clusters, bad sectors, partitioning/formatting problems, etc.)

• Drive recognition problems (e.g. hard drive that is not recognized by the operating system).

• Software removal

Note: Powermax v 4.21 will not detect ATA or SATA hard disks connected to embedded, or add in RAID controllers, Nvidia Force 3, Force 4, VIA KT 600 and KT 800 chipsets. If the hard disk is connected to an unsupported controller, it will have to be moved to an alternate system, or controller for diagnosis. Please check the Powermax download page periodically for updates. Beginning March 1st 2005 all versions of Powermax prior to v 4.21 will no longer be supported. Maxtor recomMends that you update to version 4.21 before testing your hard disk.

It is recomMended to run
HelpDrivers Since March 2000