Maxtor MaxNeighborhood Download Drivers

Available 1 files for MaxNeighborhood
HD Controller & Removable drive
Maxtor MaxNeighborhood
Operating Systems
Windows 95-98-98Se-Me-NT-2000-XP
Version Driver
Size Driver
File Name
MaxNeighborhood is the software used by MaxAttach NAS 4000 and NAS 6000 Series units.
MaxNeighborhood version 2.2 contains the following:

MaxNeighborhood_User_Guide.pdf - User Guide for MaxNeighborhood utility (English only, 550334 bytes, May 7, 2002)
Requires Adobe Acrobat Reader for viewing.
MaxNeighborhood 2.2.exe - Client MaxNeighborhood 2.2 Discovery Tool. (Self-extracting *.EXE file, 2,138,642 bytes, May 7, 2002)
NASService.exe - Server MaxNeighborhood 2.2 Service Update. (Self-extracting *.EXE file, 297,306 bytes, May 7, 2002)

Caution: The instructions for installing NAS (Server) Service found in the MaxNeighborhood User Guide are incorrect. The following are the correct steps needed to upgrade your MaxNeighborhood service protocols on your older, MaxAttach units.

NOTE: Your MaxAttach will not be available for use during this operation.
Extract MaxNeighborhood.exe to a location on your client system (e.g., C:\TEMP).
Launch your Browser (e.g., Internet Explorer) and Login to the MaxAttach User Interface (UI). Type the Administrator UsernaMe and Password when pRompted.
FRom the primary navigation Menu choose Maintenance, then Software Update.
Click the Next button to start the Software Update Wizard.
Browse to the NAS Service folder (E.g. C:\TEMP) and select
When the Wizard page returns, click on Verify.
If Valid you may continue, click Next.
Close the Browser Window when pRompted.

NOTE: Your MaxAttach will now re-boot. Wait until it completely re-boots (several minutes) before resuming use.

RecomMendations and Notes

Uninstalling Old Version(s) of MaxNeighborhood
Older versions of MaxNeighborhood must be removed before installing MaxNeighborhood 2.2. To do so:

FRom the client (where MaxNeighborhood is installed), click Start | Settings | Control Panel.
Double click on the Add/Remove Programs icon.
Select MaxNeighborhood and click on the Change/Remove button to remove the old version.

Protocol Support
The MaxNeighborhood program requires the TCP\IP protocol to be installed on the client system in order to initially configure the MaxAttach unit. Please consult your network administrator on the appropriate settings for your environMent. While MaxAttach does support IPX, this protocol alone, loaded on the client system cannot be used to administer the MaxAttach NAS units.

Default IP Address AssignMent If No DHCP Server Present
The default Method of securing an IP address on the MaxNeighborhood is through a DynAmic Host Configuration Protocol (DHCP) Server. If the MaxAttach unit cannot detect a DHCP Server on the network segMent, it will automatically default to a Microsoft reserved Class B IP Address of 169.254.x.y and a subnet mask of To configure a unit with this private address you should temporarily modify a client's IP address to follow the private addressing schema (e.g. with subnet MaxNeighborhood will detect MaxAttach units in the saMe subnet only. The MaxNeighborhood program does not span across subnets.

Web Browsers Supported by the MaxNeighborhood 2.2
The web browser recomMended for use with the MaxNeighborhood utility is Microsoft Internet Explorer Version 5.5 or higher. Microsoft Internet Explorer Version 5.5 allows the administrator to login and logout of the Administrative Interface through Active X controls thus preventing unauthorized use if the browser is left open. Internet Explorer 4.0X is no longer supported by the MaxNeighborhood utility.

Required Security Settings on the Browser
The MaxAttach Administrative utility now connects by default through a Secure Socket Layer (SSL) connection. This allows for all communication to be encrypted over the network. There are two procedures that should be configured for your browser prior to and during the initial configuration of the MaxAttach.
First Procedure:
This procedure is required to set two non-default settings required within the IE 5.5 browser to make the logout feature (and security tiMe-out) work correctly.
Launch Internet Explorer.
Click on the Tools Menu and select Internet Options
Click on the Security tab
In the Security Level for This Zone, click on the Custom Level button
Change Download Unsigned ActiveX Controls fRom disable to enable.
Change Initialize and script Active X Controls not marked as safe fRom disable to enable.
Click on the Yes button. When pRompted by Are you sure you want to change security settings for this zone?
Click on OK to close the Window.
Once the logout feature has been used once, these browser settings can be reset for subsequent security issues.

The minimum required Internet Explorer (IE) version is 5.0 although this earlier browser version does not support the advanced security features and the Web UI interface will not display a LOGOUT button.

Second Procedure:
When you initially configure the MaxAttach using MaxNeighborhood you will get a dialogue box regarding a security certificate.

You should select the option to View and then install the certificate using the Certificate Installation Wizard. If you elect not to install the certificate, you will not be allowed to enter the MaxAttach NAS Administrative web site through SSL. If you change the server naMe of the MaxAttach you will be pRompted on the next entry in the Administrative utility to again reinstall a new certificate.

Easy to use Windows interface
Compatible with Windows 98, Me, Windows 2000, and Windows XP.
Breaks the 528 MB, 2.1 GB, 4.2 GB, 8.4 GB, 32 GB, 64 GB and 137 GB capacity barriers.
Supports both FAT32 and NTFS drive partitions.
Supports up to four ATA devices in the saMe system.
The copy feature lets you make an exact duplicate of your existing hard drive.
Fast ATA and Serial ATA compatible.
The Installation tutorial option allows you
HelpDrivers Since March 2000