LSI KT-950R Download Drivers

Available 3 files for KT-950R
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI KT-950R
Description
Drivers
Operating Systems
MS-Dos
Version Driver
4.00
Size Driver
151Kb
File Name
rpdos.exe
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI KT-950R
Description
Drivers
Operating Systems
Windows 95
Version Driver
1.0
Size Driver
67Kb
File Name
rpwin95.exe
Info
[Version]
signature="$Windows 95$"
Class=SCSIAdapter
Provider=%Mylex%

[Manufacturer]
%Mylex%=Mylex

[Mylex]
%PCI\VEN_104B&DEV_8130.DeviceDesc%=FlashPointPCI,PCI\VEN_104B&DEV_8130

[FlashPointPCI]
CopyFiles=MoveMiniPort
AddReg=ios,FlashPointPCI.reg
UpdateInis=UpdateInisSection

[FlashPointPCI.PosDup]
*BUS0042

[*BUS0042.Det]
AddReg=ForceMPCopy

[IOS]
HKR,,DevLoader,,*IOS
HKR,,DontLoadIfConflict,,"Y"

[ControlFlags]
CopyFilesOnly=PCI\VEN_104B&DEV_8130

[FlashPointPCI.reg]
HKR,,PortDriver,,FlashPt.mpd

[ForceMPCopy]
HKR,,NoSetupUI,,1
[ControlFlags]
CopyFilesOnly=PCI\VEN_104B&DEV_8130

[DestinationDirs]
MoveMiniPort=12
; Destination for MoveMiniPort Section is windows\iosubsys

[SourceDisksFiles]
FlashPt.mpd = 1

[SourceDisksNames]
1 = %Disk1%,, 0000-0000

[MoveMiniPort]
FlashPt.mpd

[UpdateInisSection]
%10%\IOS.INI, SafeList,, %FlashptStr%

[strings]
Mylex="Mylex"
PCI\VEN_104B&DEV_8130.DeviceDesc="Mylex FlashPoint PCI SCSI Host Adapter"
Disk1="Mylex RAIDPlus Drivers Diskette"
FlashptStr = "Flashpt.sys ; Mylex PM Driver Exists"
Company
LSI
Categories
HD Controller & Removable drive
Model
LSI KT-950R
Description
Drivers
Operating Systems
Windows NT4
Version Driver
5.02
Size Driver
79Kb
File Name
fpnt-a.exe
Info
BusLogic FlashPoint PCI SCSI Host Adapter Driver
For Microsoft Windows NT
Version 5.02

Sections
=========

I. Introduction
II. Installation
III. Upgrading an existing system
IV. Configurating Tunable Parameters
V. What Happened
I. Introduction
===============

This README file contains compressed installation instructions and
notes on configuring tunable paramenters for the BusLogic FlashPoint
device driver. For more detailed installation instructions and other
information, please refer to the manual included with the software
package.

II. Installation
================
NT 4.0 include Flashpoint Family support on the distribution
CD-ROM. The following steps are needed only if you cannot install with
the built in driver.

1. Copy four files - FLASHPNT.SYS, FLASHPNT.TAG, OEMSETUP.INF, and
TXTSETUP.OEM to a blank formatted diskette to create a BusLogic
Windows NT FlashPoint diskette.

2. Boot from the Windows NT setup boot diskette and insert setup
disk #2 when prompted.

3. Choose CUSTOM Setup (not Express Setup).

4. You may then choose to bypass Mass Storage detection (not
mandatory but quicker).

5. When prompted, choose S to specify additional device.

6. Choose "Other (Requires disk provided by a hardware manufacturer)"
option.

7. Insert the BusLogic FlashPoint Device Drivers diskette into
drive A:.

8. Select "Buslogic FlashPoint PCI SCSI Host Adapter".

9. The system will load the FlashPoint device driver and indicate
that it has recognized a FlashPoint PCI SCSI Host Adapter in your
computer. Press enter to continue with the rest of Windows NT 3.5x
installation.

III. Upgrading an existing system
================================
NT 4.0 includes Flashpoint Family support on the distribution
CD-ROM. The following steps are needed only if you have a problem with
the built in driver.
This procedure does is a very wordy way of getting Flashpnt.sys to
(Boot device):\WINNT35\SYSTEM32\DRIVERS for NT 3.51 or
(Boot device):\WINNT\SYSTEM32\DRIVERS for NT 4.0
Making a backup of the Original Flashpnt.sys would be the safest thing
to do since this procedure over writes the original file.
HelpDrivers Since March 2000