Exsys EX-3337 Download Drivers and Manual

Available 2 files for EX-3337
Company
Exsys
Categories
HD Controller & Removable drive
Model
Exsys EX-3337
Description
eS-ATA 4+2 RAID 0-1 PCI Controller
Operating Systems
Manual
Size Manual
561Kb
File Name
ex-3337.pdf
Info
Features
?? Silicon Image SiI3114 SATA controller chip
?? Compliant with PCI Specification, Rev. 2.3, 32-bit, 33/66Mhz
?? Compliant with Serial ATA 1.0 specification
?? Provides four independent channels to support up to four Serial
ATA drives
?? Supports RAID0 (striping), RAID1 (mirroring), RAID5 (Parity
RAID), RAID 0+1(mirroring + striping) and Concatenation
modes
?? HDDs function normally when not in RAID sets
?? Supports SATA up to 150MB/Sec
?? Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64bit
Bus Interface
?? PCI Bus 32 bit
Connectors
?? 4 x internal SATA connectors
?? 2 x external eSATA connectors
Package Contents
?? 1 x SATA 150 4-Channel PCI RAID Card
?? 1 x Driver CD
?? 2 x SATA Data Cable
?? 1 x Manual
Note: Contents may vary depending on the market/country.

System Requirements
?? Pentium-class computer with one available PCI slot
?? Windows® 2000, XP/2003 32/64bit, Vista 32/64bit

Note: There are six SATA ports in SATA 150 4-Channel PCI RAID
Card. We name these ports from A through F. Ports A to D are internal
SATA ports. Ports E and F are external SATA ports. Changing the
jumper settings allows you to select between external and internal ports
to use. By default, Port A, B, C and D are working.
Hardware Installation
1. Turn Off the power to your computer and any other connected
peripheral devices.
2. Unplug the power cord form the back of the computer.
3. Remove your computer’s cover.
4. Remove the slot bracket from an available PCI slot.
5. To install the card, carefully align the card’s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly, but gently, until it is well seated.
6. Replace the slot bracket’s holding screw to secure the card.
Device Connection
The SATA 150 4-Channel PCI RAID Card is a four channel Serial ATA
controller that supports up to four Serial ATA hard disk drives. It is
recommended to use identical hard drives for all RAID configurations.
1. Install your hard disk drive(s) in chassis.
2. Connect the Serial ATA hard disk drive to the system power
supply using the included Serial ATA power cable.
3. Connect one end of the Serial ATA cable to the hard disk drive.
4. Attach the other end of the Serial ATA cable to the Serial ATA
controller on the SATA 150 4-Channel PCI RAID Card.
5. Follow the same instructions to connect up to four hard drives.
Device connection is now complete.
6. Replace the computer cover and reconnect the power cord.

RAID Arrays
RAID Arrays are setup in the SATA 150 4-Channel PCI RAID Card’s
BIOS.
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will
destroy existing data on the hard drive. Auto Configuration is
recommended. For applications that require custom chunk size,
Manual Configuration is offered.
Company
Exsys
Categories
HD Controller & Removable drive
Model
Exsys EX-3337
Description
eS-ATA 4+2 RAID 0-1 PCI Controller
Operating Systems
Windows 2000-XP-2003-Vista-Linux
Size Driver
22.7Mb
File Name
ex-3337.zip
HelpDrivers Since March 2000