Emtec S800 Download Firmware

- Fixed ATV scan for Belgium.
- Recommended for ATV sound troubles STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

- UK DVB-T frequency table is corrected
- Add DNS Server IP Address manually input support (in the setup->network menu)
- Prev /next button is disabled during Analog TV recording
- DVB-T TV/Radio to be switched separately now
- Fixed DVB-T 90x issue
- Add HDD Spin Down support STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

- Correct DVB-T scan for Italy
- Add NTFS write support (Recording, file copy, etc.)
- Add alphabetic sorting support for Artist in the Library menu
- DVB-T channel swap improved
- Add recording support for Internet Radio
- Fix DVB-T EPG time issue
- Add music shuffle feature under Browser->Music tab (via the blue button on the remote control)
- Add move function in the file copy menu
- Add Czech and Slovakia support in TV region
- Fix crash issue on some Wi-Fi dongles
- Fixed a HDMI boot up issue on certain TV sets
- Add support for RM/RMVB format (size up to 640x480) STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

- Fix internet radio issue
- Fix issue in spanih intereconomia channel STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

- Improve DVB-T scan in Italy
- Improve DVB-T sorting function STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.

- Fix internet radio issue STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.