Emtec R700 Download BIOS

Available 2 files for R700
Company
Emtec
Categories
HD Controller & Removable drive
Model
Emtec R700
Description
Med bios (1108-013P)
Operating Systems
Firmware
Version BIOS
213
Size BIOS
9.4Mb
File Name
firmware_release_213_for_model_with_bios_1108_013p_only.zip
Info
STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.
Company
Emtec
Categories
HD Controller & Removable drive
Model
Emtec R700
Description
Mit bios (1102-029P)
Operating Systems
Firmware
Version BIOS
90
Size BIOS
28.2Mb
File Name
firmware_r700.zip
Info
The firmware is the operating system (OS) installed on the device. If you've met some difficulties to
install the firmware via PC you can try this method.
Warnings:
1- this procedure will reformat your hard disk, should you need your data, do not forget to back up
them before,
2- if you want to update the firmware to this latest version, make sure you've got the right bootcode:
0007.000a.046. How to check the bootcode? Go to „VIDEO IN“ then press the „stop“ and „pause“
buttons of your remote controler, this information will be displayed on your TV screen.
Step 1: prepare your USB stick
After download and unzip of the firmware, copy part.txt* and all files from Data folder to the root of
your USB stick, you must have those 6 files on your stick:
1- arial.ttf
2- install.img
3- install_a
4- logo_pal.bmp
5- part.txt
6- video_firmware.bin
Step 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the Movie Cube-R.
Step 3: Hold the POWER button
Press and hold the POWER button on the front panel, and do not loosen.
Step 4: Connect the power cable
Plug the power cable into the DC IN jack, wait for about 3 seconds or more, and then loosen your
finger on the POWER button;
Firmware installation will start in about 30 seconds. The LED indicators on the front panel will be
enlightened and flashing during installation. If it is connected to a TV set, a yellow install page will
appear on the TV screen.
HelpDrivers Since March 2000