Emtec Q120 Download Drivers and Firmware

Available 3 files for Q120
Company
Emtec
Categories
HD Controller & Removable drive
Model
Emtec Q120
Description
4.2.1062
Operating Systems
Firmware
Version Firmware
220
Size Firmware
9.5Mb
File Name
firmware_release_220_for_4.2.1062_only.zip
Info
- Fixed NAS function troubles Please read « important note.txt » file before setting up firmware

STEP 1: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 6 files from firmware foder to the root directory of your USB Pen Drive.

STEP 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of player

STEP 3: Hold the STANDBY button
Press and hold the STANDBY button on the front panel, and do not loosen.

STEP 4: Connect the power cable
Plug the power cable into the DC IN jack, turn on power switch, wait about 5 seconds or more, and then loosen your finger on the STANDBY button.

Firmware installation will start in about 15 seconds. The LED indicators on the front panel will be enlightened and flashing druing installation. If it is connected to a TV set, the similar page will appear on the TV screen.
Company
Emtec
Categories
HD Controller & Removable drive
Model
Emtec Q120
Description
4.1.1062
Operating Systems
Firmware
Version Firmware
52
Size Firmware
28.4Mb
File Name
firmware_q120.zip
Info
The firmware is the operating system (OS) installed on the device. If you've met some difficulties to
install the firmware via PC you can try this method.
Warnings:
1- this procedure will reformat your hard disk, should you need your data, do not forget to back up
them before,
2- if you want to update the firmware to this latest version, make sure you've got the right bootcode:
0007.000a.046. How to check the bootcode? Go to „VIDEO IN“ then press the „stop“ and „pause“
buttons of your remote controler, this information will be displayed on your TV screen.
Step 1: prepare your USB stick
After download and unzip of the firmware, copy part.txt* and all files from Data folder to the root of
your USB stick, you must have those 6 files on your stick:
1- arial.ttf
2- install.img
3- install_a
4- logo_pal.bmp
5- part.txt
6- video_firmware.bin
Step 2: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the Movie Cube-R.
Step 3: Hold the POWER button
Press and hold the POWER button on the front panel, and do not loosen.
Step 4: Connect the power cable
Plug the power cable into the DC IN jack, wait for about 3 seconds or more, and then loosen your
finger on the POWER button;
Firmware installation will start in about 30 seconds. The LED indicators on the front panel will be
enlightened and flashing during installation. If it is connected to a TV set, a yellow install page will
appear on the TV screen.
Company
Emtec
Categories
HD Controller & Removable drive
Model
Emtec Q120
Description
NAS activation on model 4.2.1062 (only)
Operating Systems
Software
Size Driver
1.5Mb
File Name
nas_activation_on_model_4.2.1062_only.zip
HelpDrivers Since March 2000