Domex DMX3194UP Download Drivers

Available 6 files for DMX3194UP
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
MS-Dos
Version Driver
V2.304
Size Driver
109Kb
File Name
dosr2304.zip
Info
DOMEX DMX3194U/UP/UW Device Drivers for DOS
-------------------------------------------

1. Overview

Under the Microsoft DOS operating System, the DOMEX DMX3194 host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.

You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.

The DMXCD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.

The DOSSETUP utility will install the DOMEX ASPI device driver
(ASPI3194.SYS) for DOS 3.3.1 or later. It will also optionally install the
SCSI CD-ROM device driver(DMXCD.SYS).

2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.

(e.g., C:>A:)

3. Type DOSSETUP.

A:>DOSSETUP

3. ASPI3194.SYS

The standard format for command line in the CONFIG.SYS file is:

DEVICE=C:\DMXASPI\ASPI3194.SYS [Driver Config Option]
Driver Config Options:

/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.
3. CD-ROM Driver(DMXCD.SYS)
DMXCD.SYS is a DOS device driver for supporting SCSI CDROM drives.
It is the interface between MSCDEX.EXE (supplied by Microsoft) and
the physical CDROM drive. DNXCD.SYS must be loaded by your CONFIG.SYS
start up file. DMXCD.SYS requires that an ASPI Manager be loaded.
Therefore, you must load DMXCD.SYS after you load the appropriate ASPI
Manager. DMXCD.SYS can be loaded with either the "DEVICE" or
"DEVICEHIGH" command. Below is a list of command line options and
examples.
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
Windows 2000
Version Driver
V2.304
Size Driver
13Kb
File Name
win2k_3194.zip
Info
DOMEX DMX3194UP Device Driver for Windows 2000
------------------------------------------------------------------

Index

1) DOMEX Technical Support
2) Diskette Contents
3) Windows 2000 INSTALLATION
1) DOMEX Technical Support
--------------------------------------

DOMEX Technology Corpration

(408) (510)796-2188 -- Tech Support
(408) (510)796-2189 -- FAX


2) Diskette Contents
------------------------------

+--ROOT
| |
| +--README.TXT : This file.
| +--TXTSETUP.OEM : OEM script file for Windows 2000.
| +--DMX3194.INF : script file for Windows 2000.
|
+--WIN2K
|
+--DMX3194.SYS : Device Driver(v2.16) for WINDOWS 2000.


3) Windows 2000 INSTALLATION
------------------------------------------------

Adding or Updating the DOMEX driver to an existing Windows 2000 system
booted from an IDE drive or different type of host adapter:

Install the DMX3194 in an open PCI slot, do not attach any cables to the adapter.

1. Establish a Win2000 session.
Select CONTROL PANEL from within the MY COMPUTER group.
Select ADD/REMOVE HARDWARE from within the CONTROL PANEL group,
Click on NEXT.

2. Windows will show the Hardware Wizard and ask you to click on NEXT.
Select ADD/TROUBLESHOOT A DEVICE, then click on NEXT.
Select ADD A NEW DEVICE, then click on NEXT.

3. Windows will now ask you to choose either SEARCH FOR NEW HARDWARE or
to SELECT THE HARDWARE FROM A LIST. You want to SELECT THE HARDWARE
FROM A LIST, then click on NEXT.

4. Select SCSI and RAID CONTROLLERS, click on NEXT.
Select the HAVE DISK option and point Windows to the drivers (either on
the floppy disk or the temp directory where you unzipped the drivers).
The DOMEX DMX3194 PCI SCSI Controller should be listed on the
screen, Highlight it and click on NEXT. You may need to click on NEXT
at a couple of more screens until Windows comes up with a warning
about the driver not being tested for Windows 2000, at this point it
will ask if you wish to continue, click on YES then click on FINISH at
the next screen.

This should successfully install the drivers, in which case you can now shutdown
the machine and connect your devices to the DMX3194 and reboot.
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
Windows 2000 SP4-XP
Version Driver
V2.304
Size Driver
12Kb
File Name
dmx3194_xp.zip
Info
DOMEX DMX3194UP Device Driver for Windows 2000
------------------------------------------------------------------

Index

1) DOMEX Technical Support
2) Diskette Contents
3) Windows 2000 INSTALLATION
1) DOMEX Technical Support
--------------------------------------

DOMEX Technology Corpration

(408) (510)796-2188 -- Tech Support
(408) (510)796-2189 -- FAX


2) Diskette Contents
------------------------------

+--ROOT
| |
| +--README.TXT : This file.
| +--TXTSETUP.OEM : OEM script file for Windows 2000.
| +--DMX3194.INF : script file for Windows 2000.
|
+--WIN2K
|
+--DMX3194.SYS : Device Driver(v2.16) for WINDOWS 2000.


3) Windows 2000 INSTALLATION
------------------------------------------------

Adding or Updating the DOMEX driver to an existing Windows 2000 system
booted from an IDE drive or different type of host adapter:

Install the DMX3194 in an open PCI slot, do not attach any cables to the adapter.

1. Establish a Win2000 session.
Select CONTROL PANEL from within the MY COMPUTER group.
Select ADD/REMOVE HARDWARE from within the CONTROL PANEL group,
Click on NEXT.

2. Windows will show the Hardware Wizard and ask you to click on NEXT.
Select ADD/TROUBLESHOOT A DEVICE, then click on NEXT.
Select ADD A NEW DEVICE, then click on NEXT.

3. Windows will now ask you to choose either SEARCH FOR NEW HARDWARE or
to SELECT THE HARDWARE FROM A LIST. You want to SELECT THE HARDWARE
FROM A LIST, then click on NEXT.

4. Select SCSI and RAID CONTROLLERS, click on NEXT.
Select the HAVE DISK option and point Windows to the drivers (either on
the floppy disk or the temp directory where you unzipped the drivers).
The DOMEX DMX3194 PCI SCSI Controller should be listed on the
screen, Highlight it and click on NEXT. You may need to click on NEXT
at a couple of more screens until Windows comes up with a warning
about the driver not being tested for Windows 2000, at this point it
will ask if you wish to continue, click on YES then click on FINISH at
the next screen.

This should successfully install the drivers, in which case you can now shutdown
the machine and connect your devices to the DMX3194 and reboot.
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
Windows 3.x
Version Driver
V2.304
Size Driver
13Kb
File Name
w31r2304.zip
Info
1. Installation

The Windows SETUP utility will install the optional windows 32-bit disk
access device driver(D94CTRL.386) and DOMEX ASPI for Windows device driver
(WINASPI.DLL).

2. 32-Bit Disk Access Driver

- 32-Bit disk access driver works under Windows 3.1, Windows 3.11, and
Windows for Workgroups 3.11.

- 32-Bit disk access driver requires the DOS ASPI (ASPI3194.SYS) to be
properly loaded.

- If you can not run Windows after installing the DOMEX 32-Bit disk
access device driver, use the following command line to temporarily
disable the 32-Bit disk access driver:

win /d:f [ENTER]

- To permanently disable 32-Bit Disk Access, remove the
following lines from the [386Enh] section in the SYSTEM.INI file,
using an appropriate text editor:

DEVICE=INT13.386
DEVICE=D94CTRL.386
3. ASPI for Windows

- DOMEX Windows ASPI Driver (WINASPI.DLL) requires the DOS ASPI Driver
(ASPI3194.SYS) and 32-Bit disk access driver to be loaded and
functioning properly.

- DOMEX Windows ASPI Driver only functions under Windows Enchanced mode.
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
Windows 95-98
Version Driver
V2.304
Size Driver
12Kb
File Name
w9xr2304.zip
Info
DOMEX DMX3194UP Host Adapter
Windows 98 device driver

FILES YOU NEED:
-------------------------------------------------------------------------
Information script files for installation: dmx3194.inf.
Miniport device driver: dmx3194.mpd.

INSTALLATION:
-------------------------------------------------------------------------
A: New Windows 98 installation:
B. Adding DOMEX3194 to an existing Windows 98:
C. Updating device driver:
A: New Windows 98 installation:
=============================

1. Run SETUP.EXE from the Windows 98 CD-ROM and follow the direction
on your screen.

2. After a Windows 98 session is established,
select "My Computer/Control Panel/System/Device Manager/Other-
devices/PCI SCSI Bus Controller" from the Windows 98 desktop.

3. Click the "Driver" tab, then click the "Change Driver" tab.

4. Double click "SCSI controllers", then click the "Have Disk"
button.

5. At the prompt, type in "A:\win98", insert DOMEX DMX3194
driver disk 1, and click the "OK" button.


6. Select "DOMEX DMX3194 Host Adapter", click the "OK" button.
Windows 98 will copy dmx3194.mpd to your hard disk and
complete the driver installation.

B. Adding DOMEX DMX3194 to an existing Windows 98:
================================================

1. Install the DOMEX hardware as described in the User Manual/User
Guide. Windows 98 will detect the presence of a new hardware.

2. When Windows 98 displays the following:

New Hardware Found
PCI SCSI Bus Controller
Select which driver you want to install for your new hardware:
* Driver from disk provided by hardware manufacture
OK Cancel Help

Click "OK".

3. Windows 98 will then display the following:

Install From Disk
Insert the manufactures's installation disk into the drive
selected, and then click OK
Copy manufacturer's files from
A:\WIN98

Insert the DOMEX DMX3194 Driver disk 1 into drive A: and Click "OK".

Windows 98 will copy dmx3194.mpd to your hard disk and
complete the driver installation.
Company
Domex
Categories
HD Controller & Removable drive
Model
Domex DMX3194UP
Description
Drivers
Operating Systems
Windows NT4
Version Driver
V2.304
Size Driver
1Kb
File Name
ntr2304_1.zip
Info
If you want to setup new Winnt OS from Scsi device,Please update
two file(ntr2304.zip;ntr2304_1.zip)

And put the files into the same direction.
HelpDrivers Since March 2000