Dawicontrol DC-150 Raid Download Drivers

Available 1 files for DC-150 Raid
Company
Dawicontrol
Categories
HD Controller & Removable drive
Model
Dawicontrol DC-150 Raid
Description
Drivers
Operating Systems
Windows 98-Me-NT-2000-XP
Size Driver
287Kb
File Name
dc150drv.zip
Info
Silicon Image SiI 3112 SATARaid Controller OS Driver Installation
-------------------------------------------------------------------------
Table of Contents
-----------------

1) Windows NT 4.0 and Windows 2000/XP Fresh Installation.

2) Adding the SiI RAID controller to an existing Windows NT installation.

3) Adding the SiI RAID controller to an existing Windows 2000/XP installation.

4) Verifying controller installation under Windows NT, 2000 and XP.

5) Update SiI RAID driver on Windows NT 4.0 with existing Silicon Image driver.

6) Update SiI RAID driver on Windows 2000/XP with existing Silicon Image driver.

7) Windows 98SE and Windows ME Fresh Installation Instructions.

8) First time installing SiI RAID driver with existing Windows 98SE/ME.

9) Update SiI RAID driver on Windows 98SE/ME with existing Silicon Image driver.

--------------------------------------------------------
1) Windows NT 4.0 and Windows 2000/XP Fresh Installation
--------------------------------------------------------
Follow the instructions in this section if you are performing a new
installation of Windows NT 4.0 or Windows 2000/XP, and you wish to
boot from a device attached to the SiI 3112 controller.

1. Power off the system. Connect the hard drives to the SiI 3112
controller and insert the controller into a PCI slot. Power up
the system.

2. Put your Windows NT/2000/XP CD into the CD-ROM/DVD drive, or
the NT/2000/XP boot diskette #1 in the floppy drive if your
system cannot boot from the CD.

3. Press F6 for third party SCSI or driver installation at the beginning
of text mode installation. Press 's' when setup asks if you want to
specify an additional device, and insert the diskette labeled
'Silicon Image SiI 3112 SATARaid Driver Installation Disk' .

Press 'Enter' and select
'Silicon Image SiI 3112 SATARaid Controller'

4. Press 'Enter' to continue on with text mode setup.

5. Follow the setup instructions to select your choice for
partition and file system.

6. After setup examines your disks, it will copy files to
Windows 2000 installation folders and restart the system.
The setup program will continue and finish the installation
after restart.

7. Wait until Windows 2000 finishes installing devices, regional
settings, networking settings, components, and final set of
tasks, reboot the system if it is required.

8. See instructions in section 4 to verify controller was installed
correctly.
HelpDrivers Since March 2000