Your opinion is important to us!

We need your opinion! No Email! No Registration!
Company
Chronos
Categories
HD Controller & Removable drive
Model
Chronos MP810C
Description
SCSI Cards
Operating Systems
Netware
Size
240Kb
Info
NETWARE README.TXT FOR NETWARE 3.1X, 4.1X AND 5.0
---------------------------------------------------------------
NETWARE 3.1X
To use the INI-9xxxU/UW under NetWare 3.1x the system must be
upgraded to use the NetWarePeripheral Architecture (NWPA).

1. Create the directory SERVER.312
2. Copy NWPA_UP.EXE to C:\SERVER.312
3. Execute NWPA_UP.EXE in C:\SERVER.312 directory
4. Delete NBI.NLM and NWTAPE.CDM
5. Execute 312PTC.EXE in the same directory
6. Create the directory C:\SERVER.312\CDSAVE
7. Copy CDROM.NLM to C:\SERVER.312\CDSAVE
8. Copy INI9100.HAM and INI9100.DDI to the SERVER.312 directory
NEW NETWARE 3.1X INSTALLATION
9. Change to the NETWARE\ENGLISH directory on the installation CD
10. Enter INSTALL begin the installation routine
11. At the server console enter the following commands
12. Load the INI910.HAM driver LOAD C:\SERVER.312\INI9100.HAM
13. Continue the installation by loading INSTALL.NLM creating
partitions and volumes
14. Create STARTUP.NCF file
15. Create the AUTOEXEC.NCF file and add the following lines
before saving
16. At the server console enter the following command
17. Down and reboot the server
CURRENTLY INSTALLED 3.12 SERVER
9. Edit the STARTUP.NCF file and add the following lines after any
set parameter but before any file loading
10. Boot the server, dismount any CD-ROM volumes if mounted,
unload CDROM.NLM if loaded then load INSTALL.NLM
11. Edit the AUTOEXEC.NCF and replace the line that loads
CDROM.NLM with the following lines
12. Down and exit the server, then reboot

-----------------------------------------------------------
NETWARE 4.1X
To use the INI-9XXXU/UW under NetWare 4.1x the system must be
upgraded to use the latest NetWare Peripheral Architecture
(NWPA)
1. Create the directory C:\UPDATE
2. Copy NWPA_UP.EXE to C:\update
3. Copy INI9100.HAM and INI9100.DDI to C:\UPDATE
4. Execute NWPA_UP.EXE in the C:\UPDATE directory
5. Delete NBI31X.NLM, NWTAPE.CDM and NWTAPE.DDI
NEW NETWARE 4.11 INSTALLATION
6. Begin the installation routine (INSTALL.BAT on the root of
the install CD)
7. When prompted to edit the STARTUP.NCF file by placing the
following line after any set parameter but before any file
loading
8. When prompted to select a device driver to load, select
INI9100.HAM from the
9. Continue installation
10. When prompted to add any lines to the AUTOEXEC.NCF file add
the following lines
11. Down and exit he server
CURRENTLY INSTALLED 4.11 SERVER
6. From DOS edit the STARTUP.NCF file and add the following lines
after any set parameters but before any file loading
7. Boot the server and dismount any CD-ROM volumes if mounted and
unload CDROM.NLM if loaded
8. Edit the AUTOEXEC.NCF file and replace the line to load
CDROM.NLM with the following line, and save the file
9. Down the server and reboot

----------------------------------------------------------------
NETWARE 5.0
NEW NETWARE 5.0 INSTALATION
1. Begin the install routine (INSTALL.BAT from the root of the
installation CD)
2. At the screen listing detected device drivers select MODIFY
3. Select STORAGE ADAPTERS and press ENTER
4. Delete INI9100.HAM
5. Press INS twice followed by F3 to add a driver
6. Place the INI-9XXXU/UW driver diskette into the floppy drive
and press enter
7. At the next screen select RETURN TO DRIVER SUMMARY
8. Continue the installation as described in the User's Manual.

Close comments X

Nickname
Operating Systems
Operation
Your vote
Positivo
Negativo
Your Comment *

* Advertising /Spam posts will be deleted before being posted!

* All posts are pre-approved by a moderator before being posted

* Only post in English

* Only post links to Official Sites

* Offensive comments will be deleted.

HelpDrivers Since March 2000