Available 5 files for Addonics HDD Duplicator Subsystem HDU5SAS
Select Files
Company
Addonics
Categories
HD Controller & Removable drive
Serie
Addonics HDD Duplicator Series
Model
Addonics HDD Duplicator Subsystem HDU5SAS
Description
1:9 High Speed HDD duplicator Firmware
Operating System
Firmware
Size Driver
414KB
File Name
hdu9sashs-161s_d.zip
Observations
Applies to: HDU9SASHS, HD925HS, HD9SNDXHS, HD9SITDRHS
firmware verison 1.61S
Firmware update procedure (Requires one hard drive containing the firmware file):
Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
Download the firmware and unzip the file to .BIN file format
Copy the .BIN file onto the 50 MB partition of the HDD
Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
Once completed, it will reboot and show you the new firmware version
Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:
Place drive in the source slot
Execute "PreScan" function for 1 minute
Press "ESC" key until you see "User Abort" on the LCD screen
Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again
Company
Addonics
Categories
HD Controller & Removable drive
Serie
Addonics HDD Duplicator Series
Model
Addonics HDD Duplicator Subsystem HDU5SAS
Description
All 1:1 HDD Duplicators Firmware 1.35H
Operating System
Firmware
Size Driver
134KB
File Name
hdusas_135h.zip
Observations
Applies to: HDUS325DX, HDUSI325, HDUSI325AES, ZHDUESA, HDUSAS
Current firmware version number: 1.35H
This firmware update fixes the following issues:
Version:1.23H
- Support Fast copy function.(FAT/FAT32/NTFS/EXT2/EXT3/Swap)
- Modified: Change the Fast Copy switch name form Yes/No change to On/Off.
- Modified: Change the target drive not enough space string.
- Modified: Change the LCD display of Copy HDD / Compare HDD/Prescsn Source progress time by increasing numbers.
Version:1.35H
- Add support for drive size 2TB and larger
- Fixed Bug that COMPARE HDD is different when 28bit and 48bit HDD finished copy action.
- Improved 28bit HDD overwrite speed.
- Added Overwrite function(One pass/Three pass/Seven pass) using DoD standard 5220.22-M
- Added Secure erase function.
Firmware update procedure (Requires one hard drive containing the firmware file):
Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
Download the firmware and unzip the file to .BIN file format
Copy the .BIN file onto the 50 MB partition of the HDD
Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
Once completed, it will reboot and show you the new firmware version
Notes for the new firmware:
Added drive sanitization feature using the SECURE ERASE and OVERWRITE functions. The new functions are found under the Advance set up menu. These two functions apply to both source and target drive when the drives are present.
SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
OVERWRITE - There are three options: One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. (5220.22-M is the DoD standard for drive sanitization)
Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:
Place drive in the source slot
Execute "PreScan" function for 1 minute
Press "ESC" key until you see "User Abort" on the LCD screen
Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again
Company
Addonics
Categories
HD Controller & Removable drive
Serie
Addonics HDD Duplicator Series
Model
Addonics HDD Duplicator Subsystem HDU5SAS
Description
All 1:3, 1:4, 1:5 HDD Duplicators Firmware
Operating System
Firmware
Size Driver
521KB
File Name
hdu5sas_161bq_d.zip
Observations
Applies to: HDUSI3TDR, HDUS3325DX, HDUS4SNDX, HDUSI5TDR, HDUS5SNDX, HDUS5NB, HDUS5325DX, HDUS325, HDUS525LT, HDUS525, HDU5SAS
Current firmware version number: 1.61BQ
Firmware update procedure (Requires one hard drive containing the firmware file):
Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
Download the firmware and unzip the file to .BIN file format
Copy the .BIN file onto the 50 MB partition of the HDD
Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
Once completed, it will reboot and show you the new firmware version
Notes for the new firmware:
Added drive sanitization feature using the SECURE ERASE and OVERWRITE functions. The new functions are found under the Advance set up menu. These two functions apply to both source and target drive when the drives are present.
SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
OVERWRITE - There are three options: One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. (5220.22-M is the DoD standard for drive sanitization)
Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:
Place drive in the source slot
Execute "PreScan" function for 1 minute
Press "ESC" key until you see "User Abort" on the LCD screen
Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again
Company
Addonics
Categories
HD Controller & Removable drive
Serie
Addonics HDD Duplicator Series
Model
Addonics HDD Duplicator Subsystem HDU5SAS
Description
1:5 High Speed HDD duplicator Firmware for HS series
Operating System
Firmware
Size Driver
412KB
File Name
hdu5sashs-161v_d.zip
Observations
Applies to: HDU5SASHS, HDSI5TDRHS, HD525LTHS, HD5NBHS, HD5SNDXHS
firmware version 1.61V. This firmware is for the High Speed (HS) series of 1:5 HDD/SSD duplicator
Firmware update procedure (Requires one hard drive containing the firmware file):
Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
Download the firmware and unzip the file to .BIN file format
Copy the .BIN file onto the 50 MB partition of the HDD
Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
Once completed, it will reboot and show you the new firmware version
Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:
Place drive in the source slot
Execute "PreScan" function for 1 minute
Press "ESC" key until you see "User Abort" on the LCD screen
Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again
Company
Addonics
Categories
HD Controller & Removable drive
Serie
Addonics HDD Duplicator Series
Model
Addonics HDD Duplicator Subsystem HDU5SAS
Description
All 1:7 and 1:11 HDD Duplicator Firmware 1.46C
Operating System
Firmware
Size Driver
523KB
File Name
hdu11sas_146cp.zip
Observations
Applies to: HDUS725, HDUS1125LT, HDU11SITDR, HDUS11325DX, HDUS11SNDX, HDU11SAS
Current firmware version number: 1.46C
This firmware update fixes the following issues: Version:1.46CP
- Support GPT partition Table.
- Add Secure Erase function.
- Add Overwrite function
- Fixed Fast Copy ext3 partition stop working in some special case.
Firmware update procedure (Requires one hard drive containing the firmware file):
Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
Download the firmware and unzip the file to .BIN file format
Copy the .BIN file onto the 50 MB partition of the HDD
Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
Once completed, it will reboot and show you the new firmware version
Notes for the new firmware:
Added drive sanitization feature using the SECURE ERASE and OVERWRITE functions. The new functions are found under the Advance set up menu. These two functions apply to both source and target drive when the drives are present.
SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
OVERWRITE - There are three options: One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. (5220.22-M is the DoD standard for drive sanitization)
Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:
Place drive in the source slot
Execute "PreScan" function for 1 minute
Press "ESC" key until you see "User Abort" on the LCD screen
Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again
Access to Official Website Addonics
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.