Digital Research DRCDRom40- Ultima artec Download Drivers

Available 1 files for DRCDRom40- Ultima artec
Company
Digital Research
Categories
CD & DVD
Model
Digital Research DRCDRom40- Ultima artec
Description
DRSound-OPTI 931
Operating Systems
MS-Dos-Windows 3.1
Size Driver
88Kb
File Name
drcdultm.exe
Info
CDRom driver files are not needed for Windows 9x or NT The readme file for IDE CD-ROM v.1.0.0

I. GENERAL DESCRIPTION
II. REQUIREMENTS
III. INSTALLATION PROCEDURES
IV. CHANGING THE CONFIGURATIONS
======================
I. GENERAL DESCRIPTION
======================

The CD-ROM drive packet comes with an installation utility
which includes the essential CD-ROM drivers for your CD-ROM
drive to communicate with your computer.

The following files are included in the diskette provided:

README.TXT -- Information about this disk
INSTALL.EXE -- CD-ROM installation program v.1.0.3
ACDRV.SYS -- CD-ROM device driver v.1.0.0
ACME100.TXT -- User's Manual (English version) v.1.0.0
ACMF100.TXT -- User's Manual (French version) v.1.0.0
ACMG100.TXT -- User's Manual (German version) v.1.0.0
ACMI100.TXT -- User's Manual (Italian Version) v.1.0.0
ACMS100.TXT -- User's Manual (Spanish version) v.1.0.0
=================
II. REQUIREMENTS
=================

A. Hardware Requirements
1. IBM PC/AT or compatible (80386-base system
recommended)
2. Minimum EGA graphic display (VGA recommended)
3. Minimum 2MB DRAM recommended
4. One free IDE port
5. One CD-ROM drive

B. Software Requirement
1. Microsoft Windows 3.1 or later
2. MS-DOS version 5.0 or later
3. MS-DOS CD-Extension (MSCDEX 2.21) or later

C. Please do NOT place the CD-ROM drive on the surface
inclination more than 10 degrees.
============================
III. INSTALLATION PROCEDURES
============================

Please observe the following steps to install the CD-ROM
driver:

1. Insert the installation diskette into a floppy disk
drive of your computer.
2. Change the directory to that of your floppy disk drive,
then type "INSTALL [ENTER]" at the DOS prompt.
3. Follow the on-screen instructions to complete the
installation.
4. Reboot your system to activate the driver.

In general, you can just continually press the ENTER key to
install the default settings. A directory (default C:\ACDROM)
containing the CD-ROM drivers is created during installation.
Your AUTOEXEC.BAT and CONFIG.SYS files are also modified to
include the following lines:

for CONFIG.SYS:
DEVICE=C:\ACDROM\ACDRV.SYS /D:ARTCD001 /V
HelpDrivers Since March 2000