BenQ DVP 2108VR Download Drivers and Firmware

Available 3 files for DVP 2108VR
Company
BenQ
Categories
CD & DVD
Model
BenQ DVP 2108VR
Description
Firmware Check
Operating Systems
Tool
Version Firmware
1.0
Size Firmware
22Kb
File Name
fwcheck.zip
Info
Please use this tool to check your current firmware.
Company
BenQ
Categories
CD & DVD
Model
BenQ DVP 2108VR
Description
Firmware Update
Operating Systems
Windows 98-NT-2000-XP
Version Firmware
1.32
Size Firmware
1Mb
File Name
2108v132.zip
Info
New Important Update: The next generation of High Speed Media ( 4x DVD-R , 2x DVD-RW , released by DVD Forum at September 17,2002 ) would be possible damage 2108VR, and the new firmware ( v1.32 ) can avoid the potential issue, but the firmware would force to reduce the high speed DVD-R/RW to 1x only.

P.S. Please pay attention that the firmware v1.32 can't be reverted to older version anymore.
Company
BenQ
Categories
CD & DVD
Model
BenQ DVP 2108VR
Description
CDROM-DVDROM-CDREWRITER MS-DOS Driver
Operating Systems
MS-DOS
Language Driver
English, Spanish, German, Italian, and French
Version Driver
2.14
Size Driver
177Kb
File Name
apicd214.exe
Info
CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.
HelpDrivers Since March 2000