BenQ CRW 3210P Download Drivers and Firmware

Available 6 files for CRW 3210P
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
Firmware Version detection tool for MS Windows
Operating Systems
Applications
Version Firmware
1.0
Size Firmware
48Kb
File Name
cdrominq.exe
Info
Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
Firmware upgrade
Operating Systems
MS-DOS Windows 98-Me-2000-XP
Version Firmware
B.RW
Size Firmware
730Kb
File Name
brw.zip
Info
Firmware upgrade for the BenQ 3210P model with firmware version B.xW (the last letter is a 'W'). Zip file containing the upgrade program for MS Windows98 / ME / 2000 / XP . There are five files after you un-compress the ZIP file as follows,
xxx-DOS.exe => DOS version flash tool
IDE-DOS.doc => The Instruction for DOS version flahs tool

xxx-Win.exe => Windows version flash tool
IDE-Win.doc => The Instruction for Windows version flahs tool

Readme.txt => This file

P.S. xxx mean the firmware version , for example,
"9FA-Win.exe" or "9FA-DOS.exe" would flash firmware from 9.xA to 9.FA

Both these tow kinds of flash tools can upgrade the firmware to the same version,
DOS version only can work for pure DOS envirnment, not Windows MS-DOS mode.
And the Windows Version only can work under Win98/Me/2000, it can't suit to Wun95/NT.
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
Firmware Check
Operating Systems
Tool
Version Firmware
1.0
Size Firmware
22Kb
File Name
fwcheck.zip
Info
Please use this tool to check your current firmware.
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
Firmware Flash User Guide
Operating Systems
User Guide
Version Firmware
1.0
Size Firmware
407Kb
File Name
firmware_flash_user_guide.doc
Info
User Guide to show how to use the flash program to flash the firmware of a BenQ CDRewriter .
The Windows Version of Firmware Upgrading Procedure.

1. Executive the Flash Program on Win98/Me/2000/XP directly.
Attention !! .. This program can’t work under Win95 / NT !!
2. Select the drive you want to upgrade, please refer to the Fig.1
3. Click “ Flash the drive ! “, please refer to the Fig.1
4. Then you would see the following windows, please click “ OK “
5. Flash Program would check the drive and show “ Please don’t turn off the power. Upgrading firmware… “
6. After upgrading, you would see the following window, it means that your drive already perform the firmware-upgrading job.
7. The last message would show “ === SUCCEED === “, please click “ Exit “ button to exit the program.
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
Instructions for the Windows Firmware Update Tool
Operating Systems
Windows 98-Me-2000-XP
Version Firmware
1.0
Size Firmware
407Kb
File Name
win.doc
Info
Read the instructions carefully to know how to use the Windows Version of the Firmware Update Tool. The Windows Firmware Update Tool supports Win98 / WinMe / Win2000 / WinXP .
Company
BenQ
Categories
CD & DVD
Model
BenQ CRW 3210P
Description
CDROM-DVDROM-CDREWRITER MS-DOS Driver
Operating Systems
MS-DOS
Language Driver
English, Spanish, German, Italian, and French
Version Driver
2.14
Size Driver
177Kb
File Name
apicd214.exe
Info
CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.
HelpDrivers Since March 2000