Casio EX-Z30 Download Drivers

Available 6 files for EX-Z30
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
Re-installing the USB Driver when Upgrading from Windows2000 to WindowsXP
Operating Systems
Windows 2000-XP
Size Driver
22.9Kb
File Name
win2kup.exe
Info
Supported Models
QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3EX, QV-3000EX/Ir, QV-3500EX, QV-4000, QV-5700, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61, QV-R62,
GV-10, GV-20,
EX-S1, EX-S2, EX-S3, EX-S20, EX-S20U, EX-S100, EX-M1, EX-M2, EX-M20, EX-M20U, EX-Z3, EX-Z4, EX-Z4U, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-Z57, EX-P600, EX-P700




[ Description ]
After you upgrade to Windows XP on a Windows 2000 computer where the QV Digital Camera USB driver was originally installed using plug and play, the standard USB driver may not install properly when you connect a USB cable. If you experience problems performing USB data communication after upgrading to Windows XP, perform the steps provided below to install the USB driver.

[ When installation is not required ]

The standard USB driver should install automatically the first time you connect a USB cable to your computer after upgrading to Windows XP from a Windows 2000 configuration like the once described below.
QV Digital Camera USB driver was not installed under Windows 2000.
Windows 2000 USB Filter Driver, downloaded from the CASIO Website, was installed under Windows 2000.
QV Digital Camera driver was installed using Setup on the CD-ROM that comes bundled with the QV Digital Camera.

Important!
You may still experience USB data communication problems even if you uninstall the QV Digital Camera USB driver from Windows 2000 before upgrading to Windows XP.

[ Symptoms of USB Data Communication Problems ]

The USB data communication problem being described here exists if the message "Cannot Install this Hardware CASIO DIGITAL CAMERA" (Figure 1) appears on your computer screen the first time you connect the USB cable after upgrading from Windows 2000 to Windows XP. If this happens, click [Finish] and then perform the installation procedure below.

Figure 1

[ To install the USB driver ]
1. Go here and download the file named win2kup.exe(22.9KB) .
Double-click the file with your mouse, which will extract a file named win2kup.inf.
On some computers, the extracted file name will appear as win2kup instead of win2kup.inf.

2.
Copy win2kup.inf to a floppy diskette, and insert the diskette into your computer's disk drive (A:).

Figure 2
3. Turn on your QV Digital Camera and connect it to your computer using the USB cable.
4.
Select My Computer, right-click and then select Properties.
On the dialog box that appears, select Hardware Device Manager Universal Serial Bus controllers.
5. Select CASIO DIGITAL CAMERA, which should have a yellow exclamation mark (!) next to it (Figure 3). Right-click with your mouse and then select Update Driver.

Figure 3
6. Under What do you want the wizard to do? on the Hardware Update Wizard screen, select Install from a list or specific location (Advanced) and then click Next.

Figure 4
7. For Please choose your search and installation option, select Don't search. I will choose the driver to install and then click Next.

Figure 5
8. For Hardware Type, select Universal Serial Bus controllers and then click Next.

Figure 6
9. For Model under Select the device driver you want to install for this hardware, select CASIO DIGITAL CAMERA, and then click Have Disk.

Figure 7
10. When the Install From Disk screen appears, make sure that A:/ is selected for Copy manufacture's files from: and then click OK. If A:/ is not selected, click Browse and then select A:/.

Figure 8
11. This should cause Select the device driver you want to install for this hardware to change to Casio Digital Camera, so click Next.

Figure 9
12. This will cause the message has not passed Windows Logo testing to verify its compatibility with Windows XP to appear on the Hardware Installation screen. Simply click Continue Anyway.

Figure 10
13. On the Completing the Hardware Update Wizard screen, click Finish.

Figure 11
14. Next, open Device Manager again.
15. In Universal Serial Bus controllers, select Casio Digital Camera, right-click with your mouse, and then select Update Driver.

Figure 12
16. When Hardware Update Wizard appears, select Install the software automatically (Recommended) for What do you want the wizard to do?, and then click Next.

Figure 13
17. On the Completing the Hardware Update Wizard screen, click Finish.

Figure 14
18. This completes the installation procedure. Next you should perform the steps below to confirm that the driver is selected correctly.

>[ To check if the USB driver is selected ]
1. Select Device Manager Universal Serial Bus controllers Casio Digital Camera.
2.
Right-click with the mouse to display Properties.
3. Select Driver Driver Details.
4.
Confirm that the qv2kux.sys file is selected under Driver files:, and then click OK.
If qv2kux.sys file is not selected, click OK and perform the entire procedure under "To install the USB driver" again.


Figure 15
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
Downloading PTP PictBridge for Vista Software
Operating Systems
Windows Vista
Language Driver
Apr.2007
Size Driver
31Kb
File Name
32_wpdmtphw.exe
Info
Using PTP (PictBridge) to send image data to camera memory from a computer running the Vista operating system can result in the image data being corrupted so it does not display properly. To avoid this, download the PTP (PictBridge) for Vista software and install it on your computer. The PTP(PictBridge) for Vista software will make it impossible for you to send image data from your computer to the camera using PTP (PictBridge).

Supported Models: EX-P600,EX-P700,EX-S100,EX-S500,EX-S600,EX-S600D,EX-S770D,EX-Z10,EX-Z30,EX-Z40,EX-Z50,EX-Z55,EX-Z57,EX-Z60,EX-Z70,EX-Z110,EX-Z120,EX-Z500,EX-Z600,EX-Z700,EX-Z750,EX-Z850,EX-Z1000,QV-R61,QV-R62
Important!
• If you have multiple CASIO digital cameras that are different models, you will need to install the different software for each model.
• If your computer has multiple slots or if you are connecting the camera to a computer via a USB hub, you will need to install the software for each route.
• Regardless of whether or not this software is installed, you still can transfer images between the camera and your computer using Mass Storage.
• Regardless of whether or not this software is installed, you still can transfer images from the camera to your computer using PTP (PictBridge).
Installation Precautions and Procedure
The following explains installation by installing the 32-bit version on the EX-Z1000 camera.
Important!
• Never try to install this software on any computer that is not running the Windows Vista operating system.


1. On the camera, select "Set Up", "USB", and then "PTP (PictBridge).


2. Use the USB cable to connect the camera to your computer, and then press the cradle's USB button (or the camera's power button, depending on your camera model) to turn on the camera.


3. Double-click the compressed file that you downloaded (32_wpdmtphw.exe), which will extract it.
On the dialog box that appears, specify the folder to which you want to extract the files, and then click [OK].
Extracting the file will first create a folder named 32_wpdtphw inside the folder you specified (Figure 1) and then will create a file named wpdmtphw.inf (Figure 2) inside it.


(Figure 1)
(Figure 2)



4. On the "Start" menu, select"Control Panel" (Figure 3).


(Figure 3)



5. Select "System and Maintenance" (Figure 4) and then "Device Manager" (Figure 5).


(Figure 4)


(Figure 5)



6. On the "User Account Control" dialog box that appears, select "Continue".


7. Click "Portable Device" (Figure 6), select the camera connected via the USB cable (EX-Z1000), and then right-click with your mouse to display the shortcut menu.


(Figure 6)



8. Select "Update Driver Software..." (Figure 7).


(Figure 7)



9. On the "How do you want to search for driver software?" dialog box that appears, select "Browse my computer for driver software" (Figure 8).


(Figure 8)



10. On the "Browse for driver software on your computer" dialog box that appears, select "Let me pick from a list of device drivers on my computer" (Figure 9).


(Figure 9)



11. On the "Select the device driver you want to install for this hardware." dialog box that appears, select the "Show compatible hardware" check box and then select "Have Disk..." (Figure 10).


(Figure 10)



12. On the "Install From Disk" dialog box that appears (Figure 11), click [Browse...].


(Figure 11)



13. Select "wpdmtphw.inf" (Figure 12). After making sure that the correct name is displayed in "File name", click "Open".


(Figure 12)



14. After confirming that the correct path to the wpdmtphw.inf file is shown in the "Copy manufacturer's files from:" box of the "Install From Disk" dialog box (Figure 13), click "OK".


(Figure 13)



15. On the "Select the device driver you want to install for this hardware." dialog box (Figure 14) that appears, click "Next".


(Figure 14)



16. If the "Windows Security" dialog box appears during the installation, select "Install this driver software anyway" (Figure 15).


(Figure 15)



17. The message "Windows has successfully updated your driver software" (Figure 16) indicates that installation is complete. Click "Close".


(Figure 16)



18. On the camera, select PTP (PictBridge) for the USB mode, and try to transfer image data from your computer to the camera to see if it works properly.
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
Downloading PTP PictBridge for Vista Software
Operating Systems
Windows Vista 64 bits
Language Driver
Apr.2007
Size Driver
31Kb
File Name
64_wpdmtphw.exe
Info
Using PTP (PictBridge) to send image data to camera memory from a computer running the Vista operating system can result in the image data being corrupted so it does not display properly. To avoid this, download the PTP (PictBridge) for Vista software and install it on your computer. The PTP(PictBridge) for Vista software will make it impossible for you to send image data from your computer to the camera using PTP (PictBridge).

Supported Models: EX-P600,EX-P700,EX-S100,EX-S500,EX-S600,EX-S600D,EX-S770D,EX-Z10,EX-Z30,EX-Z40,EX-Z50,EX-Z55,EX-Z57,EX-Z60,EX-Z70,EX-Z110,EX-Z120,EX-Z500,EX-Z600,EX-Z700,EX-Z750,EX-Z850,EX-Z1000,QV-R61,QV-R62
Important!
• If you have multiple CASIO digital cameras that are different models, you will need to install the different software for each model.
• If your computer has multiple slots or if you are connecting the camera to a computer via a USB hub, you will need to install the software for each route.
• Regardless of whether or not this software is installed, you still can transfer images between the camera and your computer using Mass Storage.
• Regardless of whether or not this software is installed, you still can transfer images from the camera to your computer using PTP (PictBridge).
Installation Precautions and Procedure
The following explains installation by installing the 32-bit version on the EX-Z1000 camera.
Important!
• Never try to install this software on any computer that is not running the Windows Vista operating system.


1. On the camera, select "Set Up", "USB", and then "PTP (PictBridge).


2. Use the USB cable to connect the camera to your computer, and then press the cradle's USB button (or the camera's power button, depending on your camera model) to turn on the camera.


3. Double-click the compressed file that you downloaded (32_wpdmtphw.exe), which will extract it.
On the dialog box that appears, specify the folder to which you want to extract the files, and then click [OK].
Extracting the file will first create a folder named 32_wpdtphw inside the folder you specified (Figure 1) and then will create a file named wpdmtphw.inf (Figure 2) inside it.


(Figure 1)
(Figure 2)



4. On the "Start" menu, select"Control Panel" (Figure 3).


(Figure 3)



5. Select "System and Maintenance" (Figure 4) and then "Device Manager" (Figure 5).


(Figure 4)


(Figure 5)



6. On the "User Account Control" dialog box that appears, select "Continue".


7. Click "Portable Device" (Figure 6), select the camera connected via the USB cable (EX-Z1000), and then right-click with your mouse to display the shortcut menu.


(Figure 6)



8. Select "Update Driver Software..." (Figure 7).


(Figure 7)



9. On the "How do you want to search for driver software?" dialog box that appears, select "Browse my computer for driver software" (Figure 8).


(Figure 8)



10. On the "Browse for driver software on your computer" dialog box that appears, select "Let me pick from a list of device drivers on my computer" (Figure 9).


(Figure 9)



11. On the "Select the device driver you want to install for this hardware." dialog box that appears, select the "Show compatible hardware" check box and then select "Have Disk..." (Figure 10).


(Figure 10)



12. On the "Install From Disk" dialog box that appears (Figure 11), click [Browse...].


(Figure 11)



13. Select "wpdmtphw.inf" (Figure 12). After making sure that the correct name is displayed in "File name", click "Open".


(Figure 12)



14. After confirming that the correct path to the wpdmtphw.inf file is shown in the "Copy manufacturer's files from:" box of the "Install From Disk" dialog box (Figure 13), click "OK".


(Figure 13)



15. On the "Select the device driver you want to install for this hardware." dialog box (Figure 14) that appears, click "Next".


(Figure 14)



16. If the "Windows Security" dialog box appears during the installation, select "Install this driver software anyway" (Figure 15).


(Figure 15)



17. The message "Windows has successfully updated your driver software" (Figure 16) indicates that installation is complete. Click "Close".


(Figure 16)



18. On the camera, select PTP (PictBridge) for the USB mode, and try to transfer image data from your computer to the camera to see if it works properly.
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
USB Driver
Operating Systems
Mac OS 8.1 to 8.5.1
Language Driver
Mar.2003
Size Driver
13.2Kb
File Name
usbdriver85.sit
Info
Supported Models:
QV-8000SX, QV-2000UX/Ir, QV-3000EX/Ir, QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61, GV-10, GV-20, EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3, EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z4, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

• You do not need to install the USB driver if your Macintosh is running the Mac OS9 Series or Mac OS X (10.1 to 10.2). USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.

1. Use StuffIt Expander or some other application to expand the file you downloaded (USBdriver85.sit).
• This creates a folder named "UsbDriver" and creates the files listed below inside of it.
CASIO-USB StorageDriver
CASIO-USB StorageClassShim
readme


2. Double-click the hard disk that is specified as your startup disk.


3. On the "Hard Disk" window that opens, double click the "System Folder" to open it.


4. On the "System Folder" window, double click the "Extensions"folder to open it.


5. Double-click the extracted "USBdriver85" folder to extract it.


6 On the "USBdriver85" window that opens, drag the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file to the "Extensions" folder window you opened above.


7 This completes USB driver installation. Restart your Macintosh, and then use the special USB cable to connect your digital camera to your Macintosh. When you turn on your digital camera, the memory card loaded in it will be mounted on your Macintosh as a drive.

Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Move the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file from the "Extensions" folder (located in the "System" folder) to the Trashcan.
2. Restart your Macintosh.
•This completes the uninstall operation.
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
USB Driver
Operating Systems
Mac OS 8.6
Language Driver
Mar.2003
Size Driver
14.4Kb
File Name
usbdriver.sit
Info
Supported Models:
QV-8000SX, QV-2000UX/Ir, QV-3000EX/Ir, QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61,GV-10, GV-20,
EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3. EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

• You do not need to install the USB driver if your Macintosh is running the Mac OS9 Series or Mac OS X (10.1 to 10.2). USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.

1. Use StuffIt Expander or some other application to expand the file you downloaded (USBdriver.sit).
• This creates a folder named "UsbDriver" and creates the files listed below inside of it.
CASIO-USB StorageDriver
CASIO-USB StorageClassShim
readme


2. Double-click the hard disk that is specified as your startup disk.


3. On the "Hard Disk" window that opens, double click the "System Folder" to open it.


4. On the "System Folder" window, double click the "Extensions"folder to open it.


5. Double-click the extracted "USBdriver" folder to extract it.


6 On the "USBdriver" window that opens, drag the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file to the "Extensions" folder window you opened above.


7 This completes USB driver installation. Restart your Macintosh, and then use the special USB cable to connect your digital camera to your Macintosh. When you turn on your digital camera, the memory card loaded in it will be mounted on your Macintosh as a drive.

Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Move the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file from the "Extensions" folder (located in the "System" folder) to the Trashcan.
2. Restart your Macintosh.
•This completes the uninstall operation.
Company
Casio
Categories
Cameras
Model
Casio EX-Z30
Description
USB Driver
Operating Systems
Windows 98-98Se-Me-2000
Language Driver
Mar.2003
Size Driver
882Kb
File Name
usb_win.exe
Info
Supported Models:
QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3000EX/Ir, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41,QV-R51, QV-R52, QV-R61, GV-10*1, GV-20*1, QV-8000SX*2, QV-2000UX/Ir*2, EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3, EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

*1 This USB driver is for image import only (when "NORMAL" is selected on the "SET UP" menu). It cannot be used in the case of a PC camera (when "PC CAMERA" is selected on the "SET UP" menu).
*2 Note that use of this upgrade is not supported under Windows 2000. Instead, install the Windows 2000 USB Filter Driver.
• This USB driver does not need to be installed for Windows XP. USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.If the digital camera is connected to a computer before installing the driver, the Plug & Play function may register it as an unidentified device.

1. Double-click the compressed USB driver file (usb_win.exe) that you downloaded. This will automatically extract it.


2. On the dialog box that appears, specify the location where you want to extract the files, and then click "OK"
• This will create a folder named "usb_win" at the location you specified. The folder will contain the files listed below.


3. Open the extracted "usb_win" folder, and then double click "Setup.exe" (Figure 1) to start the installer.


Figure 1




4. On the welcome dialog box that appears (Figure 2), click [Next].
• This starts installation.


Figure 2




5. When the "InstallShield Wizard Complete" dialog box appears, select the "Yes, I want to restart my computer now" check box, and then click [Finish] (Figure 3).


Figure 3




6 After your computer restarts, use the special USB cable to connect your digital camera to your computer.
• After your computer restarts, double-click "My Computer".



7 Check to make sure that the memory card loaded in the digital camera is shown as a "Removable Disk" on your computer screen (Figure 4).


Figure 4



Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Click your computer!s [Start] button.
2. Click "Settings", "Control Panel", and then "Add/Remove Program".
3. On the list of programs on the dialog box that appears, select "USB CASIO Digital Camera", and then click [Add/Remove].
4. In response to the "This will remove CASIO Digital Camera from your computer. Do you wish to proceed?" message that appears, select [Yes] to perform the uninstall operation.
HelpDrivers Since March 2000