Canon Digital IXUS II S Download Drivers

ENGLISH
CANON INC.
30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Europa, Africa and Middle East
CANON EUROPA N.V.
PO Box 2262, 1180 EG Amstelveen, The Netherlands
CANON (UK) LTD
For technical support, please contact the Canon Help Desk:P.O. Box 431, Wallington, Surrey, SM6 0XU, UK
Tel: (08705) 143723 Fax: (08705) 143340 http://www.canon.co.uk/Support/index.asp
CANON COMMUNICATION & IMAGE FRANCE S.A.
102 Avenue du Général de Gaulle,
92257 LA GARENNE COLOMBES CEDEX, France
Tel: Hotline 08 25 00 29 23http://www.cci.canon.fr
CANON DEUTSCHLAND GmbH
Postfach 100401, 47704 Krefeld, Germany
Customer Hotline: 0180/5006022 (0,12 € / Min.)http://www.canon.de
CANON ITALIA S.P.A.
Via Milano 8, I-20097 San Donato Milanese (MI), Italy
Tel: 02/8248.1 Fax: 02/8248.4604
Pronto Canon: 02/8249.2000
E-mail: supporto@canon.it http://www.canon.it
CANON ESPAÑA S.A.
C/Joaquín Costa, 41 - 28002 Madrid, Spain
Tel. Atención al Cliente: 901.301.301
Helpdesk: 906.301.255http://www.canon.es
CANON BELGIUM N.V. / S.A.
Bessenveldstraat 7, B - 1831 Diegem, Belgium
Tel: (02) 722.04.11 Fax: (02) 721.32.74
Helpdesk : 0900-10627http://www.canon.be
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel: (0352) 48 47 961 Fax: (0352) 48 47 96232
Helpdesk : 900-74100http://www.canon.lu
CANON NEDERLAND N.V.
Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 023 - 5 670 123 Fax: 023 - 5 670 124
Helpdesk: 023 - 5 681 681http://www.canon.nl
CANON DANMARK A/S
Knud Højgaards Vej 1, DK-2860 Søborg, Denmark
Tel: +45 44 88 26 66http://www.canon.dk
CANON NORGE AS
Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway
Tel: 22 62 93 21 Fax: 22 62 06 15
E-mail: helpdesk@canon.nohttp://www.canon.no
Finland
CANON OY
Huopalahdentie 24, FIN-00350 Helsinki, Finland
Tel: 010 54420 Fax 010 544 30
HelpDesk 020 366 466 (1,47 snt/min + pvm)
(ma-pe klo 9:00 - 17:30)
E-mail: helpdesk@canon.fihttp://www.canon.fi
CANON SVENSKA AB
Gustav III:s Boulevard 26, S-169 88 Solna, Sweden
Helpdesk: 08-744 8620 Fax 08-744 8527http://www.canon.se
CANON (SCHWEIZ) AG
Industriestrasse 12, 8305 Dietlikon, Switzerland
Consumer Imaging Group
Tel. 01-835-61 61
Hotline 0900 57 55 20 (CHF 2.13/min)http://www.canon.ch
Austria
CANON GES.M.B.H.
Zetschegasse 11, A - 1230 Wien, Austria
Helpdesk Tel.: 01 66 146 412
Fax: 01 66 146 413http://www.canon.at
Portugal
SEQUE – SOC. NAC. EQUIP ., S.A.
Pr. Alegria, 58 - 2ºC, 1269-149 Lisboa, Portugal
Tel: (+351) 21 324 28 30 Fax: (+351) 21 347 27 51
E-mail: info@seque.pthttp://www.seque.pt
Eastern Europe
CANON CEE GMBH
Oberlaaerstr 233, A-1100 Wien, Austria
Tel: +43 1 680 88-0 Fax: +43 1 680 88-422
CIS
CANON NORTH-EAST OY
Huopalahdentie 24, 00350 Helsinki, Finland
Tel: +358 10 544 00 Fax: +358 10 544 10http://www.canon.ru
DIGITAL CAMERA Camera User Guide
Please read the Read This First section (p. 7).
Please also read the Canon Digital Camera Software
Starter Guide Disk and the Direct Print User Guide.
CEL-SE43A210 © 2004 CANON INC. PRINTED IN THE EU
Camera User Guide
EC144-Cover-CEL-E.fm Page 1 Friday, January 30, 2004 7:25 PMFlowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to perform optimally when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a chargeable basis.
Shooting with the Camera
This Guide
This Guide
Canon Digital Camera Software Starter Guide Disk
Canon Digital Camera Software Starter Guide Disk
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide
E_EC144_Cover2.fm Page 1 Friday, January 30, 2004 7:28 PM1
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots. This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 128).
Charging the Date/Time Battery
 The camera has a built-in rechargeable lithium battery that maintains the date, time and other camera settings. This battery recharges when the main battery pack is inserted into the camera. When you first purchase the camera, place a charged battery pack in it or use the AC adapter kit (sold separately) for at least 4 hours to charge the date/time battery. It will charge even when the camera power is set to Off.
 If the Date/Time menu appears when the camera power is turned on, it means that the date/time battery charge is depleted. Recharge it as described above.
EC144-CUG.book Page 1 Friday, January 30, 2004 7:13 PM2
About This Guide
Conventions Used in the Text
Question? Look Here First
What settings are available under each function?
• See Functions Available in
Each Shooting Mode (p. 160).
Will my settings remain in effect even after I’ve turned the camera off?
What can be accomplished with each function?
• See FUNC.Menu (p. 42)
• See Rec. Menu (p. 46).
• See Play Menu (p. 47).
• See Set up Menu (p. 47).
• See My Camera Menu (p. 50).
What do the icons listed in the Camera User Guide mean?
• See Information Displayed on the LCD Monitor (p. 34).
• See Menu Settings and Factory
Defaults (p. 46).: This mark denotes issues that may affect the camera’s operation.: This mark denotes additional topics that complement the basic operating procedures.
Icons on the right end of title bars show the applicable operating modes.
As in the example below, the procedure can be performed in (Auto),
(Manual), (Manual/Stitch Assist) or (Movie) mode.
Using the Self-timer
EC144-CUG.book Page 2 Friday, January 30, 2004 7:13 PM3
Preparing the Camera 18
Basic Functions 30
Shooting 53
Playback 89
Erasing 105
Print Settings/Transferring 108
Connecting the Camera to a Computer/TV 118
My Camera Settings 129
List of Messages 134
Troubleshooting 136
Appendix 140
Photo Tips and Information 149
Thumb Index
EC144-CUG.book Page 3 Friday, January 30, 2004 7:13 PM4
Read This First
Please Read............................................................................................... 7
Safety Precautions..................................................................................... 8
Preventing Malfunctions.......................................................................... 13
Components Guide............................................ 14
Preparing the Camera
Charging the Battery Pack ....................................................................... 18
Installing the Battery Pack ....................................................................... 21
Installing the SD Card.............................................................................. 23
Setting the Date and Time ....................................................................... 26
Setting the Language............................................................................... 28
Basic Functions
Turning the Power On.............................................................................. 30
Using the LCD Monitor ............................................................................32
Information Displayed on the LCD Monitor ............................................. 34
Using the Viewfinder ............................................................................... 38
Using the Zoom....................................................................................... 39
Pressing the Shutter Button .................................................................... 40
Selecting Menus and Settings ................................................................. 42
Menu Settings and Factory Defaults ........................................................ 46
Resetting Settings to Their Default Values............................................... 51
Shooting
Shooting in Auto Mode ..................................................................... 53
Reviewing an Image Right after Shooting................................................ 54
Changing Resolution/Compression Settings ........................................... 55
Quick Shots ............................................................................................. 57
Using the Flash ................................................................................... 58
Shooting Close-Ups/ Infinity Shots............................................ 60
Using the Digital Zoom............................................................................ 62
Continuous Shooting ......................................................................... 63
Using the Self-timer........................................................................... 64
Shooting in Manual Mode............................................................... 66
Shooting a Movie ............................................................................ 67
Items marked with are lists or charts that summarize camera functions or procedures.
Table of Contents
EC144-CUG.book Page 4 Friday, January 30, 2004 7:13 PM5
Shooting Panoramic Images(Stitch Assist).............................................. 69
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) ........................ 72
Locking the Exposure Setting (AE Lock).................................................. 74
Locking the Flash Exposure Setting (FE Lock) ......................................... 75
Switching between Focusing Modes ........................................................ 76
Switching between Light Metering Modes......................................... 77
Adjusting the Exposure Compensation .................................................... 78
Shooting in Long Shutter Mode............................................................... 79
Adjusting the Tone (White Balance) ......................................................... 81
Changing the Photo Effect........................................................................ 84
Adjusting the ISO Speed .......................................................................... 85
Setting the Auto Rotate Function ............................................................. 86
Resetting the File Number........................................................................ 87
Playback
Displaying Images Individually................................................................. 89
Magnifying Images............................................................................. 90
Viewing Images in Sets of Nine (Index Playback) ............................ 91
Viewing Movies........................................................................................ 93
Editing Movies ......................................................................................... 95
Rotating Images in the Display ................................................................ 97
Attaching Sound Memos to Images ......................................................... 98
Automated Playback (Slide Shows) ....................................................... 100
Protecting Images.................................................................................. 104
Erasing
Erasing Single Images ..................................................................... 105
Erasing All Images ................................................................................. 106
Formatting SD Cards.............................................................................. 107
Printing
About Printing........................................................................................ 108
Setting the DPOF Print Settings ............................................................. 110
Image Transmission Settings (DPOF Transfer Order)
Selecting Images for Transferring......................................................... 116
EC144-CUG.book Page 5 Friday, January 30, 2004 7:13 PM6
Connecting the Camera to a Computer
Connecting the Camera to a Computer.................................................. 119
Computer System Requirements ...................................................... 119
Downloading Images by Direct Transfer................................................ 123
Connecting the Camera to the Computer to Download Images without Installing Software ............................................................... 125
Downloading Directly from an SD Card ................................................. 126
Viewing Images on a TV set.................................... 127
Customizing the Camera (My Camera Settings)
Changing My Camera Settings .............................................................. 129
Registering My Camera Settings ........................................................... 131
List of Messages ............................................ 134
Troubleshooting ............................................. 136
Appendix
Using an AC Adapter Kit (Sold Separately) ............................................ 140
Camera Care and Maintenance .............................................................. 141
Specifications ........................................................................................ 142
Photo Tips and Information
Tip for Using the Self-timer ................................................................... 149
How to adjust the exposure................................................................... 149
ISO Speed.............................................................................................. 150
Advanced Technique for the Macro mode ............................................. 150
Index .......................................................... 151
Functions Available in Each Shooting Mode ............ 160
EC144-CUG.book Page 6 Friday, January 30, 2004 7:13 PM7
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Please note that Canon, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including SD memory cards, that results in the failure of an image to be recorded or to be recorded in a format that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera’s warranty, please refer to the Canon
European Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please see rear of this booklet or the European Warranty System (EWS) Booklet.
EC144-CUG.book Page 7 Friday, January 30, 2004 7:13 PM8
Safety Precautions
 Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly.
 The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
 In the next few pages, the term “equipment” refers primarily to the camera and its power supply accessories, such as the battery charger and optional compact power adapter.
Warnings
• Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight.
 Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants when using the flash.
 Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury.
In addition, placement of the strap around the child’s neck could result in asphyxiation.
 Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.
Storing SD cards
Store the SD memory card out of the reach of children and infants.
It may be swallowed accidentally. If this occurs, consult a doctor immediately.
EC144-CUG.book Page 8 Friday, January 30, 2004 7:13 PM9
 To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.
 Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the camera battery or unplug the power cable from the power outlet. Confirm that smoke or fume emissions have ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
 Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the camera battery or unplug the power cable from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
 Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If water or other foreign substances enter the interior, immediately turn the camera power off and remove the camera battery or unplug the power cable from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
 Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment.
The use of these substances may lead to fire.
 Remove the power cable on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire.
EC144-CUG.book Page 9 Friday, January 30, 2004 7:13 PM10
 Do not cut, damage, alter or place heavy items on the power adapter cable. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock.
 Do not handle the power cable if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cable, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cable may damage or expose the wire and insulation, creating the potential for fires or electrical shocks.
 Use only recommended power accessories. Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.
 Do not place the batteries near a heat source or expose them to direct flame or heat. Neither should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.
 Do not attempt to disassemble, alter or apply heat to the batteries.
There is serious risk of injury due to an explosion. Immediately flush with water any area of the body – including the eyes and mouth, or clothing – that comes into contact with the inner contents of a battery. If the eyes or mouth contact these substances, immediately flush with water and seek medical assistance.
 Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It could lead to leakage and injury.
 Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries.
Use the supplied terminal cover to transport or store the battery pack.
 Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area.
 Use only recommended batteries and accessories. Use of batteries not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
EC144-CUG.book Page 10 Friday, January 30, 2004 7:13 PM11
 Use the specified battery charger to charge Battery Pack NB-3L. Use of other chargers may lead to overheating, distortion of the equipment, fire or electrical shock.
 Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when it is not in use to avoid fire and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
 The camera terminals of the battery charger and compact power adapter are designed for exclusive use with your camera. Do not use them with other products or batteries. There is a risk of fire and other hazards.
Caution about magnetic fields
Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera (p. 15). Such items may lose data or stop working.
EC144-CUG.book Page 11 Friday, January 30, 2004 7:13 PM12
Cautions
 Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to charge the battery pack.
 Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage.
 Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.
 Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns.
 Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
 Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the specified rating. The plug of the battery charger varies according to region.
 Do not use the battery charger or compact power adapter if the plug or cable is damaged, or if the plug is not fully inserted into the power outlet.
 Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.
 If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for extended periods as your hands may experience a burning sensation.
EC144-CUG.book Page 12 Friday, January 30, 2004 7:13 PM13
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the SD card, battery pack or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the battery pack and store the equipment in a safe place. Storing the camera for extended periods with a battery pack installed will run down the battery pack and may damage the camera. The date, time and other camera settings may reset to default settings if the battery pack has been removed for more than three weeks. Follow the instructions in this guide to reset the desired settings.
EC144-CUG.book Page 13 Friday, January 30, 2004 7:13 PM14
Components Guide
Front View
* Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap.
AF-assist Beam (p. 41)
Red-eye Reduction Lamp (p. 58)
Self-timer Lamp (p. 64)
Lens
Microphone (p. 98)
Wrist Strap Mount
Attaching the Wrist Strap
*
Viewfinder Window (p. 38)
Terminal Cover
DIGITAL Terminal (p. 120)
A/V Out (Audio/Video Out)
Terminal (p. 127)
Flash (p. 58)
EC144-CUG.book Page 14 Friday, January 30, 2004 7:13 PM15
Preparing the Camera
Back View
LCD Monitor (p. 32)
Tripod Socket
SD Card Slot/
Battery Cover (pp. 21, 23)
Viewfinder (p. 38)
DC Coupler Terminal
Cover (p. 140)
Speaker
The following cables are used to connect the camera to a computer or printer.
Computer (p. 120)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
 CP Printers
Interface Cable IFC-400PCU (supplied with camera) or the Direct
Interface Cable DIF-100 (supplied with the CP-100/CP-10).
 Bubble Jet Printers
- Bubble Jet Direct Compatible Printers:Please refer to your Bubble Jet printer user guide.
- PictBridge Compliant Printers:Interface Cable IFC-400PCU (supplied with the camera)
 PictBridge Compliant Non-Canon Printers:Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible printer information.
EC144-CUG.book Page 15 Friday, January 30, 2004 7:13 PM16

Operation Panel
Power Lamp
Lights when the power is on or transmission preparations are complete when connected to a computer
Shutter Button (p. 40)
(Light Metering) Button (p. 77)/
Button
(Flash) Button (p. 58)/
Button
(Continuous) Button (p. 63)/
(Self-timer) Button (p. 64)/
Button
(Macro) / (Infinity) Button (p. 60)/
Button
SET Button
MENU Button
Indicators (p. 17)
ON/OFF Button (p. 30)
Zoom Lever
Shooting: (Telephoto)/
(Wide Angle) (p. 39)
Playback: (Magnify) (p. 90)/
(Index) (p. 91)
Mode Switch (p. 17)
Print/Share Button
(See below)
FUNC. (Function) Button (p. 42)/
(Single Image Erase) Button (p. 105)
DISP . (Display) Button (p. 32)
The following operations are accessible through one easy press of the
(Print/Share) button.
 Printing: See the Direct Print User Guide (separate from this guide)
 Downloading images (Windows only): See p.118 of this guide and the Canon
Digital Camera Software Starter Guide Disk (separate from this guide)
The indicator blinks or lights during a printer or computer connection.
Blue: Ready to print/Ready to transfer images
Blinking blue: Printing/Transferring
EC144-CUG.book Page 16 Friday, January 30, 2004 7:13 PM17
Preparing the Camera
Indicator
The indicator lights or blinks when the ON/OFF button or shutter button is pressed.
Upper Indicator
Green: Ready to shoot
Blinking Green: Recording to SD card / Reading SD card / Erasing from SD card/Transmitting data (during a computer connection)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow: Macro mode / Infinity mode/ AF lock
Blinking Yellow: Focusing difficulty (single beep).
Although you can still press the shutter button when the indicator blinks yellow, you are recommended to shoot usi

TXT / PDF

Available 27 files for Digital IXUS II S View all >
HelpDrivers Since March 2000