Quantum DLT2000 Download Drivers

Available 2 files for DLT2000
Company
Quantum
Categories
Storage & Tape Backup
Model
Quantum DLT2000
Description
Drivers
Operating Systems
Windows 2000-XP-2003
Size Driver
146Kb
File Name
quantum_driver_v3-7-0.exe
Info
Device driver to allow use of DLTtape Tape Drives with Windows 2000, Windows XP and Windows Server 2003 running on x86, x64, ia64 platforms.
Company
Quantum
Categories
Storage & Tape Backup
Model
Quantum DLT2000
Description
Drivers
Operating Systems
Windows NT4
Size Driver
1Mb
File Name
qntmdlt_2-5_nt4.exe
Info
Device driver to allow use of DLTtape Tape Drives with Windows NT 4.0 running on Intel x86 platforms.

The following is the important information of Quantum DLT2000 installation driver.



  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Turn your computer power off.

  • Connect the Quantum DLT2000 to your computer.

  • Power on the computer to start your windows system.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the DLT2000 model that was downloaded (i.e., c:\DLT2000). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • When the DLT2000 is first connected to the your computer, the Windows dialog called "Add New Hardware Wizard" will appear automatically. (To display this dialog manually, you can choose the Start button and then Settings to access the Control Panel, and then double click on Add New Hardware. The Quantum DLT2000 needs to be connected first.)

  • The Add New Hardware Wizard dialog box guides you through the driver installation process. Click on Next to move from step to step.

  • A dialog states "Windows will now search for any new Plug and Play devices on your system". Click Next.

  • A subsequent dialog gives you these options:
    Search for the best driver for your DLT2000 (Recommended) Display a list of all drivers in a specific location, so you can select the driver you want. Please accept the recommended choice by clicking on Next.

  • The Wizard will then search your hard drive for a file called ..... *****.inf (for example DLT2000.inf). This file contains all the information that Windows needs to install the correct device drivers.

  • The installation process will continue automatically until a dialog displays indicating that the drivers have been installed. Select the Finish button and your drivers for Quantum DLT2000 are installed.

  • Search and consult the Readme file for additional installation drivers instructions for your Quantum DLT2000.



Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Quantum for DLT2000.

Available 2 Drivers

HelpDrivers Since March 2000