Available 1 files for Micronet SP128B

Company

Micronet

Categories

Networks Cards

Model

Micronet SP128B

Description

Drivers

Operating System

Windows 98-Me-2000

Size Driver

11KB

File Name

sp128b.zip

Observations

Contents:

 System Requirements
 Hardware Installation
 Software Installation

----------------------------
System Requirements
----------------------------
One of the following operating systems is required:

 Windows Me
 Windows 98 or Windows 98 Second Edition
 Windows 2000
 Windows XP

----------------------
Hardware Installation
----------------------
The USB 2.0 Fast Ethernet Adapter comes with a USB cable. One end of the cable
has a rectangular plug, which is called an A-type connector. The other
end of the cable has a square plug, or B-type connector.

The adapter has two ports. One is for Twisted Pair cabling -- it
looks like an over-sized phone jack. The other port looks like a
square hole -- this is the USB B-type port.

1. Make sure your PC is powered on and that you are at the Windows 98
desktop.

2. Insert the cable's square B-type plug into the adapter's B-type
port.

3. Insert the other end of the USB cable (the A-type connector) into
the USB port on your PC. The adapter is now connected to your PC.

4. Connect your adapter to a 10Mbps or 10/100Mbps Ethernet adapter or
10/10Mbps Ethernet hub/switch using RJ-45 Twisted Pair cabling.
The RJ-45 jacks should fit into the RJ-45 port on both of the adapter
and hub/switch.

5. Only Windows XP and Windows 2000 support USB 2.0 build-in controller

----------------------
Software Installation
----------------------
Driver installation procedures vary for each operating system.
The following operating systems are supported:

 Windows Me
 Windows 2000
 Windows 98
 Windows XP
Windows Me
-----------
Follow the procedures below to install the USB 2.0 Fast Ethernet
Adapter's driver:

1. Windows will automatically detect the USB 2.0 Fast Ethernet
Adapter when it is connected to your computer.

2. The Add New Hardware Wizard will indicate that it has found
"USB Device". Click Next to continue.

3. Insert the USB 2.0 Fast Ethernet Adapter driver into
your Floppy disk drive.

4. Automatic search for a better driver (Recommended) and click Next.