Available 1 files for Genius Me3000II-TP

Company

Genius

Categories

Networks Cards

Model

Genius Me3000II-TP

Description

Drivers

Operating System

Windows 3.1-95-98-98Se-Me-NT4-2000

Version

V2.9

Size Driver

283KB

File Name

me3ktpv29.exe

Observations

PCMCIA 10Mbps Ethernet Card
Driver Diskette (Ver 2.90) Overview

TOPIC
======================================
1. DISKETTE CONTENTS
2. CLIENT DRIVER
3. SOCKET and CARD SERVICES INSTALLATION ADVISORY
4. DIAGNOSTIC PROGRAM
5. NETWARE DOS ODI DRIVER
6. PACKET DRIVER
7 NDIS DRIVER FOR OS2 LAN SERVER
8. NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
9. NDIS DRIVER FOR LAN MANAGER V2.1
10. NDIS 3.1 DRIVER FOR WINDOWS 95
11. NDIS 3.1 DRIVER FOR WINDOWS 98
12. NDIS 3.1 DRIVER FOR WINDOWS NT 3.51
13. NDIS 3.1 DRIVER FOR WINDOWS NT 4.0
14. NDIS 3.1 DRIVER FOR WINDOWS 2000
15. NDIS 3.1 DRIVER FOR WINDOWS Me
16. LINUX DRIVER

[1] DISKETTE CONTENTS
Files and
Subdirectories Contents
--------------------------------------------------------------------
\ETHERNET Tag File
\PCMCARD.INF Windows 95/98/Me Installation File
\DIAG.EXE PCMCIA Card Diagnostic Program
\INSTALL.EXE PCMCIA Installation Program
\CARDGO.EXE PCMCIA Client Driver
\README.TXT This file
\NETWARE.ODI Directory of Novell Netware DOS ODI Driver
\PKTDRV Directory of FTP Compliant Packet Driver Directory
\OS2 Directory of NDIS V2.0 Driver for OS2 LAN Server
\NDIS Directory of NDIS V2.0 Driver
\WFW311 Directory of NDIS V2.0 Enhance Mode Driver for WFW311
\MSLANMAN.DOS Directory of NDIS V2.0 Driver for Lan Manager V2.1
\LANTASTI.V60 Directory of NDIS V2.0 Driver for Lantastic V6.0
\WIN9XME Directory of NDIS V3.1 Driver for Windows 95/98/Me
\WINNT Directory of NDIS V3.1 Driver for Windows NT 3.51 and 4.0
\WIN2000 Directory of NDIS V3.1 Driver for Windows 2000
\LINUX Directory of LINUX Driver
[2] CLIENT DRIVER (For DOS and Windows 3.1 Only)

The Client Driver is a PCMCIA controller enable program. This enable
program only need for DOS and Windows 3.1 system.
To load the client driver, type

CARDGO [/IRQ=x][/IO=xxx][/MEM=xxxx][/?]

in DOS command line, or

DEVICE=[PATHNAME]CARDGO.EXE [/IRQ=x][/IO=xxx][/MEM=xxxx]

in config.sys file.

where:

[/IRQ=x] This specifies the hardware interrupt (IRQ) where your
card will be indicated.
The valid IRQs are 3,4,5,9,10,11.

[/IO=xxx] This specifies the I/O address. The valid ports are 300,
320,340,360.

[/MEM=xxxx] This specifies the memory window address. The valid
MEMs are D000, D400, D800, DC00.