Available 1 files for Eusso UKS8102

Company

Eusso

Categories

Networks Cards

Model

Eusso UKS8102

Description

2-Port PS/2 SOHO KVM Switch ( Plastic Case )

Information

Manual

Operating System

Manual

Size Driver

96KB

File Name

uks8102(4)_manual.pdf

Observations

Introduction
Thank you for purchasing 2/4 port KVM switch. 2/4 port KVM switch can save your MONEY, TIME, SPACE, EQUIPMENT
and POWER.
Controlling multiple PCs from One Keyboard, Mouse and VGA Monitor. KVM switch is loaded with features such
as hot-key, front panel push button and auto scan control. It has complete keyboard and mouse emulation for simultaneous
PCs boot-up process.
Features
! 2/4 port KVM switch is compact size design, easy portable.
! Supports Microsoft Intellimouse , MicroSoft Intellimouse Explorer Logitech Net Mouse and the other fully Microsoft
compatible mouse
! Support DOS,Win3.X,Win95/98/98SE/2000/ME/XP,WinNT,Netware,Unix,Linux
! Hot Plug - Add or Remove Connected PCs for Maintenance Without Powering Down the KVM switch or PCs.
! Very High Video Quality - Up To 1920X1440, Bandwidth: 200MHz
! No Software Required - easy PC selection via Push Buttons, Hot Keys
! Auto Scan Mode for monitoring PCs
! Keyboard status restored when switching PCs
! LED Display for easy status monitoring
! Buzzer sound for switching port confirmation.

Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
1. Connect the Keyboard, VGA, Mouse cables to the computer ports of KVM switch
2. Connect the Keyboard, VGA monitor, and Mouse to the console port of KVM switch
3. After Powering on computers and finishing the boot-up process, you can start to go KVM switch.
Please don't switch the PC port (i.e. Don't press the push button of KVM switch or run hot key) during the computers are
under boot-up process.

Usage
The push Button:
Pressing the button cyclically through all the ports.
2 port KVM Switch
Normally, there is one LED is always lit (i.e. the console is connected to this PC port) for one PC port and the other PC
port's LED is off, when you power on KVM switch.
When you select one of two PCs and it is shut down, the selected port LED flashed.

Troubleshooting
Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion.
1. KVM switch draws the power from keyboard port of computers. If the computer like laptop computer, notebook
computer or the other computer cannot support enough power to KVM switch, please add a DC 5V~9V, 100mA~1A to
the power jack. The power jack polarity is center positive.
2. Don't press any keys on the keyboard while the selected computer is booting up. Otherwise, it might cause the
keyboard error or keyboard is not detected at PC side.
3. The computer boot up fine, but keyboard doesn't work
! Make sure the keyboard works when directly plugged into the computer.
! Try a different keyboard, but use only 101, 102 or 104-key keyboard.
4. The Mouse is not detected during PC boot up.
! Make sure the mouse works when directly plugged into the computer.
! Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long as it is set for PS/2 mode with the
correct adapter.
! Try a different mouse.
5. Avoiding moving the mouse or pressing the mouse buttons when switching the port.