D-Link DWL-900AP+ Revision Cx Networks Cards > Downloads Drivers, Manual and Firmware

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-900AP+ Revision Cx

Description

22Mbps 802.11b Wireless Access Point Quick Installation Guide

Information

Quick Installation Guide

Operating System

Manual

Size Driver

2.5MB

File Name

dwl-900applus_qig.pdf

Observations

Connecting The DWL-900AP+ Wireless
Access Point To Your Network
A. First, connect the power adapter to the receptor at the back panel of
the DWL-900AP+ and then plug the other end of the power adapter to
a wall outlet or power strip. The Power LED will turn ON to indicate
proper operation.
B. Using a Straight-Through Ethernet
cable, insert one end of the cable to the
Ethernet port on the back panel of the
DWL-900AP+ and the other end of the
cable to an Ethernet Broadband
Router (i.e., D-Link DI-604) or Switch
(i.e., D-Link DSS-5+). Note: The router
or switch must be connected to the computer to be used to configure
the DWL-900AP+The Link LED light will illuminate to indicate a proper
Ethernet connection.
C. Computers with 802.11b wireless adapters can connect to the DWL-
900AP+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the
DWL-520+ AirPlus Wireless PCI Adapter will connect out of the box
with the DWL-900AP+ using their default wireless settings.
When you have completed
the steps in this Quick
Installation Guide, your
connected network should
look similar to this:

Using The Setup Wizard
Once you have
logged in, the
Home screen
will appear.
Step 1 - Set up your new
password. You have the option to
establish a password.
Step 2 - Wireless Setup
The default wireless settings are:
SSID = default
Channel = 6
You can change these settings to
match an existing wireless network.
Step 3 - Encryption
The DWL-900AP+ is capable of
three levels of wireless encryption -
64-bit, 128-bit, and 256-bit. By
default the encryption is
disabled. You can change the
encryption settings for more secure
wireless communication.

Company

D-Link

Categories

Networks Cards

Model

D-Link DWL-900AP+ Revision Cx

Description

22Mbps 802.11b Wireless Access Point Datasheet

Information

Manual

Operating System

Manual

Size Driver

374KB

File Name

dwl-900applus.pdf

Observations

2.4GHz Enhanced Performance Wireless LAN Access Point
The D-Link AirPlusTM DWL-900AP+ is an Access Point that gives 2.4GHz wireless LAN users fast, secure access to an IEEE
802.11b wireless Local Area Network (LAN). With data transfer rates at up to 22Mbps, this Access Point provides twice the
speed of other IEEE 802.11b Access Points, while adding a strong 256-bit security scheme for your data traveling on the
wireless LAN. Strictly complying to industry standards, the DWL-900AP+ gives you
the speed, security and other enhanced features without compromising interoperability with all 802.11b wireless LAN
equipment and Ethernet-based networks.
Range Extension
Access Control
Efficiency Improvement
Ehanced Speed Transmission
The DWL-900AP+ Access Point connects the wireless LAN
nodes (workstations, print servers, etc.) together via a 2.4GHz
IEEE 802.11b wireless interface. It listens to all data traffic on all
its interface and maintains a MAC address database. MAC address
information is updated dynamically. When necessary, the DWL-
900AP+ the Address Resolution Protocol (ARP) to match
IP addresses to MAC addresses and stores ARP information in its
database as well.
Through an Access Control List that contains the MAC address of
every wireless device, you can set up filters to prevent
unauthorized access to network resources.
The DWL-900AP+ can discriminate based on the destination
address of packets it handles by maintaining a list of disallowed
destinations. This helps improve efficiency by eliminating
unnecessary transmission of data packets.
At 22Mbps, the DWL-900AP+ delivers high data transfer rate
within the industry standard. This speed is double the 11Mbps
normally found in other 2.4GHz wireless LAN Access Points.
Industry-standard Interoperability
Network Security
Built-in DHCP Server
Detachable Antenna
The DWL-900AP+ delivers speeds without compromising
compatibility. With both WiFiTM certification and IEEE 802.11b
wireless LAN industry standard compliance, the DWL-900AP+
provides you with excellent network interoperability.
Security is an issue when data is transmitted without the wires. In
the air, transmitted data can be easily intercepted if not well
protected by a security scheme. The DWL-900AP+ provides the
necessary security, using the enhanced 64/128/256-bit industrystandard
WEP (Wired Equivalent Privacy) encryption protocol.
Data privacy mechanism is based on a shared key algorithm, as
described in the wireless LAN standard.
DHCP server function is built into this Access Point that
automatically assign IP addresses to connected wireless nodes. This
eliminates for you the need to install a separate DHCP server on the
network.
The DWL-900AP+ is equipped with an SMA reverse detachable
dipole antenna with an effective range of 100 meters indoors, or
400 meters outdoors. Where a longer range is required, you can
easily remove this antenna and replace it with a higher Gain
antenna.

Access to Official Website D-Link

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 7 files for D-Link DWL-900AP+ Revision Cx

Select Files